Kyocera Jet, Amp'd Mobile Jet Instruction Manual
USER GUIDE FOR THE JET PHONE FROM AMP'D MOBILETM (KX18)
AND KYOCERA WIRELESS
This manual is based on the production version
TM
of the Amp’d Mobile
Jet (Kyocera KX18)
phone. Software changes may have occurred
after this printing. Kyocera reserves the right to
make changes in technical and product
specifications without prior notice. The products
and equipment described in this documentation
are manufactured under license from
QUALCOMM Incorporated under one or more of
the following U.S. patents:
4,901,307 5,056,109 5,101,501 5,109,390 5,228,054
5,267,261 5,267,262 5,337,338 5,414,796 5,416,797
5,490,165 5,504,773 5,506,865 5,511,073 5,535,239
5,544,196 5,568,483 5,600,754 5,657,420 5,659,569
5,710,784 5,778,338
Other patents pending.
The Kyocera Wireless Corp. (“KWC”) products
described in this manual may include
copyrighted KWC and third party software
stored in semiconductor memories or other
media. Laws in the United States and other
countries preserve for KWC and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive
rights to distribute or reproduce the copyrighted
software. Accordingly, any copyrighted software
contained in the KWC products may not be
modified, reverse engineered, distributed or
reproduced in any manner not permitted by law.
Furthermore, the purchase of the KWC products
shall not be deemed to grant either directly or by
implication, estoppel, or otherwise, any license
under the copyrights, patents or patent
applications of KWC or any third party software
provider, except for the normal, non-exclusive
royalty-free license to use that arises by
operation of law in the sale of a product.
Kyocera is a registered trademark of Kyocera
Corporation. Race 21 and Brick Attack are
trademarks of Kyocera Wireless Corp.
QUALCOMM is a registered trademark of
QUALCOMM Incorporated. Openwave is a
trademark of Openwave Systems Incorporated.
eZiText is a registered trademark of Zi
Corporation. TransFlash is a trademark of
SanDisk Corporation. All other trademarks are
the property of their respective owners.
Copyright © 2005 Kyocera Wireless Corp.
All rights reserved.
Ringer Tones Copyright © 2000-2002
Kyocera Wireless Corp.
82-N8656-1EN, Rev. 001
FCC/IC Notice
This device complies with part 15 of the FCC
rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation. To maintain
compliance with FCC RF exposure guidelines, if
you wear a handset on your body, use the
Kyocera Wireless Corp. (KWC) supplied and
approved case CV90-G2573-01 and holster
CV90-G2958-01.
Other accessories used with this device for bodyworn operations must not contain any metallic
components and must provide at least 25 mm
separation distance including the antenna and
the user’s body.
PAGE II|FCC/IC NOTICE|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
THIS MODEL PHONE MEETS THE
GOVERNMENT’S REQUIREMENTS FOR
EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission of the U.S.
Government. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines are based on
standards that were developed by independent
scientific organizations through periodic and
thorough evaluation of scientific studies. The
standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile
phones employs a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR
limit set by the FCC is 1.6 W/kg.* Tests for SAR
are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in
all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value.
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a wireless base station
antenna, the lower the power output.
Before a phone model is available for sale to the
public, it must be tested and certified to the FCC
that it does not exceed the limit established by
the government-adopted requirement for
safe exposure.
The tests are performed in positions and
locations (e.g., at the ear and worn on the body)
as required by the FCC for each model.
Body-worn measurements differ among phone
models, depending upon availability of
accessories and FCC requirements. While there
may be differences between the SAR levels of
various phones and at various positions, they all
meet the government requirement for
safe exposure.
The FCC has granted an Equipment
Authorization for this model phone with all
reported SAR levels evaluated as in compliance
with the FCC RF emission guidelines. SAR
information on this model phone is on file with
the FCC and can be found under the Display
Grant section http://www.fcc.gov/oet/fccid
after searching on the FCC ID: OVFKWC-KX18.
Additional information on SAR can be found on
the Cellular Telecommunications and Internet
Association (CTIA) web-site at
http://www.wow-com.com.
* In the United States and Canada, the SAR limit
for mobile phones used by the public is 1.6
watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a substantial
margin of safety to give additional protection for
the public and to account for any variations
in measurements.
PAGE III|FCC/IC NOTICE|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
Caution
The user is cautioned that changes or
modifications not expressly approved by the
party responsible for compliance could void the
warranty and user’s authority to operate
the equipment.
Optimize your phone’s performance
Use the guidelines on page 2 to learn how to
optimize the performance and life of your phone
and battery.
Air bags
If your vehicle has an air bag, DO NOT place
installed or portable phone equipment or other
objects over the air bag or in the air bag
deployment area. If equipment is not properly
installed, you and your passengers risk
serious injury.
Medical devices, Pacemakers—Warning to
pacemaker wearers: Wireless phones, when in
the ‘on’ position, have been shown to interfere
with pacemakers. The phone should be kept at
least six (6) inches away from the pacemaker to
reduce risk.
The Health Industry Manufacturers Association
and the wireless technology research community
recommend that you follow these guidelines to
minimize the potential for interference.
• Always keep the phone at least six inches
(15 centimeters) away from your pacemaker
when the phone is turned on.
• Do not carry your phone near your heart.
• Use the ear opposite the pacemaker.
• If you have any reason to suspect that
interference is taking place, turn off your
phone immediately.
Hearing aids—Some digital wireless phones may
interfere with hearing aids. In the event of such
interference, you may want to consult your service
provider or call the customer service line to
discuss alternatives.
Other medical devices—If you use any other
personal medical device, consult the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Your physician may be able to help you obtain
this information.
In health care facilities—Turn your phone off
in health care facilities when instructed.
Hospitals and health care facilities may be using
equipment that is sensitive to external RF energy.
Potentially unsafe areas
Posted facilities—Turn your phone off in any
facility when posted notices require you to
do so.
Aircraft—FCC regulations prohibit using your
phone on a plane that is in the air. Turn your
phone off or switch it to Airplane Mode before
boarding aircraft.
Vehicles—RF signals may affect improperly
installed or inadequately shielded electronic
systems in motor vehicles. Check with the
manufacturer of the device to determine if it is
adequately shielded from external RF energy.
Blasting areas—Turn off your phone where
blasting is in progress. Observe restrictions, and
follow any regulations or rules.
Potentially explosive atmospheres—Turn off
your phone when you are in any area with a
potentially explosive atmosphere. Obey all signs
and instructions. Sparks in such areas could
cause an explosion or fire, resulting in bodily
injury or death.
PAGE IV|CAUTION|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
Areas with a potentially explosive atmosphere
are often, but not always, clearly marked.
They include:
• fueling areas such as gas stations
• below deck on boats
• transfer or storage facilities for fuel
or chemicals
• vehicles using liquefied petroleum gas, such
as propane or butane
• areas where the air contains chemicals or
particles such as grain, dust, or
metal powders
• any other area where you would normally
be advised to turn off your vehicle engine
Use with care
Use only in normal position (to ear). Avoid
dropping, hitting, bending, or sitting on
the phone.
Keep phone dry
If the phone gets wet, turn the power off
immediately and contact your dealer. Water
damage may not be covered under warranty.
Resetting the phone
If the screen seems frozen and the keypad does
not respond to keypresses, reset the phone by
completing the following steps:
1. Remove the battery door.
2. Remove and replace the battery.
If the problem persists, return the phone to the
dealer for service.
Accessories
Use only Kyocera-approved accessories with
Kyocera phones. Use of any unauthorized
accessories may be dangerous and will invalidate
the phone warranty if said accessories cause
damage or a defect to the phone.
Radio Frequency (RF) energy
Your telephone is a radio transmitter and
receiver. When it is on, it receives and sends out
RF energy. Your service provider’s network
controls the power of the RF signal. This power
level can range from 0.006 to 0.6 watts.
In August 1996, the U.S. Federal
Communications Commission (FCC) adopted RF
exposure guidelines with safety levels for
hand-held wireless phones. These guidelines are
consistent with the safety standards previously
set by both U.S. and international standards
bodies in the following reports:
• ANSI C95.1
(American National Standards Institute, 1992)
• NCRP Report 86
(National Council on Radiation Protection
and Measurements, 1986)
• ICNIRP
(International Commission on Non-Ionizing
Radiation Protection, 1996)
Your phone complies with the standards set by
these reports and the FCC guidelines.
E911 mandates
Where service is available, this handset complies
with the Phase I and Phase II E911 Mandates
issued by the FCC.
PAGE V|USE WITH CARE|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
Battery and charger specifications
Charger Input Output
CV90-G2589-01 120-230 VAC / 50/60 Hz 4.5 V 1.2 A
CV90-G2588-01 90-264 VAC / 47-63Hz 4.5 V 600 mA
Standard Battery:
CV90-N1020-06: 3.7 V / 900 mAh
Extended Battery:
CV90-N1070-05: 3.7 V / 1550 mAh
093 453 037
Kyocera Wireless Corp.
10300 Campus Point Drive, San Diego, CA
92121 U.S.A.
Visit us at www.kyocera-wireless.com
PAGE VI|BATTERY AND CHARGER SPECIFICATIONS|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
CONTENTS
1 GETTING STARTED . . . . . . . . . . . . . . . . . 1
Installing the battery . . . . . . . . . . . . . . . . . . . . . 1
Charging the battery . . . . . . . . . . . . . . . . . . . . .1
EvDO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Getting to know your phone . . . . . . . . . . . . . . . 3
Performing basic functions . . . . . . . . . . . . . . . .6
2 MAKING AND
ANSWERING CALLS. . . . . . . . . . . . . . . . . 9
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Silencing an incoming call . . . . . . . . . . . . . . . .10
Using the speakerphone . . . . . . . . . . . . . . . . . 11
Speed dialing . . . . . . . . . . . . . . . . . . . . . . . . . 13
Setting up voicemail . . . . . . . . . . . . . . . . . . . .13
Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using your phone in an airplane . . . . . . . . . . . 15
3 ENTERING LETTERS, NUMBERS,
AND SYMBOLS . . . . . . . . . . . . . . . . . . . 16
Understanding text entry screens . . . . . . . . . . .16
4 STORING CONTACTS. . . . . . . . . . . . . . . 20
Creating a new contact . . . . . . . . . . . . . . . . . .20
Adding a code or extension . . . . . . . . . . . . . . . 20
Customizing your contacts . . . . . . . . . . . . . . .20
Editing a contact . . . . . . . . . . . . . . . . . . . . . . . 22
Erasing a contact . . . . . . . . . . . . . . . . . . . . . . .22
Sending a vCard . . . . . . . . . . . . . . . . . . . . . . .22
Customizing a phone number . . . . . . . . . . . . . 22
Finding contact information . . . . . . . . . . . . . .23
5 USING THE CAMERA . . . . . . . . . . . . . . . 24
Accessing camera and video modes . . . . . . . . . 24
Taking a picture . . . . . . . . . . . . . . . . . . . . . . . 26
Camera key map . . . . . . . . . . . . . . . . . . . . . . . 27
Recording a video . . . . . . . . . . . . . . . . . . . . . . 28
6 Amp’d LiveTM. . . . . . . . . . . . . . . . . . . . . 30
What is Amp’d LiveTM? . . . . . . . . . . . . . . . . . .30
7 USING The MEDIA GALLERY . . . . . . . . 41
Accessing files . . . . . . . . . . . . . . . . . . . . . . . . .41
8 USING PUSH TO TALK . . . . . . . . . . . . . . 44
Phone position . . . . . . . . . . . . . . . . . . . . . . . . 44
PTT call types . . . . . . . . . . . . . . . . . . . . . . . . .45
Making PTT calls and alerts . . . . . . . . . . . . . . . 45
Receiving PTT calls and alerts . . . . . . . . . . . . . . 47
Saving, editing, and erasing PTT contacts . . . . 47
Saving, editing, and erasing PTT groups . . . . . 49
9 CUSTOMIZING YOUR PHONE . . . . . . . .52
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . .52
Silencing all sounds . . . . . . . . . . . . . . . . . . . . . 53
Keyguard . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Choosing ringers . . . . . . . . . . . . . . . . . . . . . . .53
Setting sounds for your phone . . . . . . . . . . . .54
Adjusting volume . . . . . . . . . . . . . . . . . . . . . . 54
Setting default message receipt . . . . . . . . . . . . 55
Setting message alerts . . . . . . . . . . . . . . . . . . . 55
Using shortcuts . . . . . . . . . . . . . . . . . . . . . . . . 55
Personalizing the screen . . . . . . . . . . . . . . . . .56
Creating a secure environment . . . . . . . . . . . . 58
Network settings . . . . . . . . . . . . . . . . . . . . . . .59
Setting position location . . . . . . . . . . . . . . . . . 60
USB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
10 MUSIC, VIDEO, AND DATA . . . . . . . . . .61
Removable memory card . . . . . . . . . . . . . . . . . 61
USB Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Mac Support on your Jet phone . . . . . . . . . . . 62
11 SENDING AND RECEIVING
TEXT MESSAGES . . . . . . . . . . . . . . . . . .65
Sending text messages . . . . . . . . . . . . . . . . . . 65
Retrieving text messages . . . . . . . . . . . . . . . . . 68
Customizing message settings . . . . . . . . . . . . . 70
12 SENDING AND RECEIVING
MULTIMEDIA MESSAGES . . . . . . . . . . . 72
Sending multimedia messages . . . . . . . . . . . . . 72
Receiving multimedia messages . . . . . . . . . . . . 73
Viewing multimedia messages . . . . . . . . . . . . . 74
PAGE VII|CONTENTS|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
13 USING TOOLS . . . . . . . . . . . . . . . . . . . . 76
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Tip Calculator . . . . . . . . . . . . . . . . . . . . . . . . .78
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Stopwatch . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
14 USING VOICE RECOGNITION . . . . . . . . 80
Setting up voice dialing . . . . . . . . . . . . . . . . . .80
Making a call using voice tags . . . . . . . . . . . . . 80
Making a call using digit dialing . . . . . . . . . . . 81
Training voice recognition . . . . . . . . . . . . . . . . 83
15 GETTING HELP . . . . . . . . . . . . . . . . . . . . 84
Customer support . . . . . . . . . . . . . . . . . . . . . . 84
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
PAGE VIII|CONTENTS|USER GUIDE FOR THE KYOCERA JET KX18 PHONE
1 GETTING STARTED
Installing the battery
Your Amp’d MobileTM Jet phone comes with a
removable lithium ion (LI Ion) battery. Fully
charge the battery before using the phone.
To install the battery:
1. Hold the phone face
down.
2. Slide the tab at the
bottom of the door up
and remove the
battery door.
3. Place the battery in
the phone casing with
the metal contacts
facing the right side of
the phone.
4. Replace the battery
door by sliding the
notches into the
openings near
the top of the phone.
5. Snap the battery door
closed to secure the
cover into place.
Charging the battery
You must have at least a partial charge in the
battery to make or receive calls.
To charge the battery:
1. Connect the AC adapter
to the jack on the
bottom of the phone.
2. Plug the adapter into a
wall outlet.
The battery icon in the upper-right corner of the
screen tells you whether the phone is:
• Charging (the icon is animated)
• Partially charged
• Fully charged
Recharging the battery
You can safely recharge the battery at any time,
even if it has a partial charge.
Note: To remove the battery, make sure the
phone is powered off.
PAG E 1|INSTALLING THE BATTERY|GETTING STARTED
Caring for the battery
General safety guidelines
• Do not take apart, puncture, or short-circuit
the battery.
• If you have not used the battery for more than
a month, recharge it before using your phone.
• Avoid exposing the battery to extreme
temperatures, direct sunlight, or
high humidity.
• Never dispose of any battery in or near a
fire. It could explode.
Common causes of battery drain
• Playing games or using the Web.
• Playing music files.
• Taking pictures and videos with the flash on.
• Keeping backlighting on.
• Operating in digital mode when far away
from a base station or cell site.
• Using data cables or accessories.
• Operating when no service is available, or
service is available intermittently.
• High earpiece and ringer volume settings.
• Repeating sound, vibration, or lighted alerts.
EvDO
EvDO is a standard for wireless broadband
provided by select cell phone carriers in the
United States. EvDO is an acronym for
Evolution Data Only, and enables download
speeds over cell phone networks of up to 2.4Mb
per second. EvDO is considered the first 3G, or
third generation wireless standard to be adopted
within the US.
What this means for phones that have EvDO
capability is that not only will they be used to
make and receive phone calls and text messages,
but also will be used to quickly access
multimedia content, such as streaming or
downloaded audio or video.
Accessing keypad shortcuts
5-Way navigation key
From the home screen, press the Navigation key
in one of four directions to access three
shortcuts and one custom menu (see page 56
for instructions on setting up your custom
menu).
Access your custom menu
Launch Media Player.
Launch My Stuff
Launch Messaging
Your Amp’d Mobile
TM
Jet has a 5-way navigation
key with a round, blue Amp’d Live
the center surrounded by a 4-way circular
navigation key. The blue Amp’d Live
has the following functions:
• EvDO Indicator — gently pulses to
indicate that EvDO coverage (Amp’d Live
content) is available.
• OK key — acts as a standard OK key
that can be used to select highlighted items.
• Launch Amp’d Live
Press the Amp’d/OK key while your
phone is idle to launch the Amp'd Live
User Interface.
Second press
resumes playback of
your playlist.
TM
button at
TM
button
TM
User Interface —
TM
TM
PAG E 2|EVDO|GETTING STARTED
Getting to know your phone
The phone is shown here in the open position. You must slide your phone open to use the keys on the
lower portion of the phone.
Home screen.
Left softkey accesses menus and functions.
Send/Talk key starts or answers a call. Press
once to activate voice dialing, twice to display
the Recent Calls list, and three times to redial
the last number dialed.
Back key erases characters in text entry and
returns you to the previous screen.
Speakerphone key activates the speakerphone
and answers incoming calls.
Keypad for entering numbers, letters, or symbols.
* Shift key changes the text mode in text entry.
Jack for AC adapter and data cable (included).
Navigation key scrolls through lists and text entry
fields and accesses shortcuts from the home screen.
Amp’d/OK key selects a menu item or option.
Right softkey accesses the Contacts directory and
other menu options.
End/Power key turns the phone on and off,
ends a call or browser session, and returns you
to the home screen.
Internal camera key activates camera/video mode.
Space # key enters a space during text entry.
Press and hold to activate or deactivate Silent mode.
0 Next key cycles through word choices
during text entry.
PAG E 3|GETTING TO KNOW YOUR PHONE|GETTING STARTED
Antenna does not extend.
Speaker for ringers, speakerphone and music.
External camera key activates Camera mode.
To activate Camera mode, press and hold until
you hear one beep. Press and hold until you
hear two beeps for Video mode.
TransFlash slot for external memory card.
Message Indicator Light
Camera flash
Jack for hands-free headset (sold separately).
Mirror when taking your own picture.
Camera lens
Volume key to raise or lower speaker volume.
Press and hold up or down to activate/deactivate
Silent Mode.
PTT - Activate Push-to-Talk.
PAG E 4|GETTING TO KNOW YOUR PHONE|GETTING STARTED
Using menus
The contents of the main menu are as follows:
Amp’d Live
TM
Amp’d PTT
Recent Calls
All Calls
Incoming Calls
Outgoing Calls
Missed Calls
Erase Call Lists
Recent Calls
Timer
All Calls Timer
Kilobyte Counter
Contacts
View All
Add New
Find Name
PTT Contacts
PTT Groups
Speed Dial List
Voice Dial List
Messaging
Groups
Information
Media Gallery
Camera Pictures
Images
Sounds
Videos
Messages
New Text Msg
New Pix Msg
Voicemail
InBox
Sent
OutBox
Saved
Drafts
Msg Settings
Group Lists
Erase Messages
Accessing menu items
From the home screen:
•Press the left softkey to select Menu.
• Press the right softkey to
select Contacts.
• Press the Navigation key left, right, up,
or down to see menus and options.
• Press the Amp’d/OK key to select a
menu item.
• Press to back up a menu level.
Settings
Silent Mode
Keyguard
Sounds
Display
Convenience
Memory Card
Voice Features
Messaging
Security
Network
Accessories
USB Mode
Camera
Launches the
camera
Tools
Voice Memo
Scheduler
Alarm Clock
Tip Calculator
Calculator
Timer
Stopwatch
Phone Info
Platform
Your N umb er
SW Version
PRL Version
Factory Config
ESN
Technology
SID
Browser Info
ERI Version
Icon Key
• Press the End/Power key to return to the
home screen.
In this guide, an arrow
→ tells you to select an
option from a menu.
For example, Menu
→ Settings means select
Menu, then select the Settings option.
Note: To change the way the menus appear, see
“Choosing your main menu view” on
page 56 for details.
PAG E 5|GETTING TO KNOW YOUR PHONE|GETTING STARTED
Performing basic functions
Note: The phone must be powered ON to perform the following functions.
To... From the home screen...
Turn the phone on
Make a call
Answer a call
Activate voice dialing
Silence the ringer on an
incoming call
End a call
Access voicemail
Push to Talk
Launch Amp’d Live
TM
Verify your phone
number
Record a voice memo
Press the End/Power key .
Enter the phone number and press .
Press the Send/Talk key .
Press the Send/Talk key to initiate voice dialing. Contact must have
voice tag assigned (see page 80).
Press the End/Power key then the Send/Talk key to answer.
Press the End/Power key .
Press and hold the “1” key and follow the system prompts.
Press the PTT key .
From the home screen, press the Amp’d/OK key .
Select Menu → Phone Info.
Select Menu → Too l s → Voice Memo → Record New.
Adjust volume during
Press the volume key on the left side of the phone up or down.
acall
Acknowledge an alert
Access customized
Press the Send/Talk key when you see OK.
Press the Navigation key up (see page 56).
shortcut
PAG E 6|PERFORMING BASIC FUNCTIONS|GETTING STARTED
To... From the home screen...
Access My Stuff
Access Messaging Menu
Access Recent Calls list
Launch Amp’d LiveTM
Media Player
Resume Music playback
Select menu options
Activate Camera mode
Take a picture
Switch from Camera to
Video mode.
Record a video
Press and hold the Navigation key left.
Press and hold the Navigation key down.
Press the Send/Talk key twice.
Press the Navigation key right.
Press the Navigation key right twice.
Highlight a menu or option and press the Amp’d/OK key once.
Press and hold the outside side camera key . Or, press the
camera key .**
Activate Camera mode and press the left softkey .*
Press the camera key . Focus on the image and select Capture.**
From Camera mode, select Options → Video Mode, or press the outside
side camera key to toggle back and forth.
Activate Video mode and press left softkey .*
Press the camera key . Select Options → Video Mode. Focus on the
image and select Record. To stop recording, select Stop.**
* Function works when slide is closed
** Function works when slide is open
PAG E 7|PERFORMING BASIC FUNCTIONS|GETTING STARTED
Understanding screen icons
These icons may appear on your phone’s screen.
EvDO is available.
The phone is operating in IS2000 (1X)
digital mode.
Both EvDO and Is2000 (1X) are available.
The phone is operating in IS95
digital mode.
The phone is receiving a signal. You can
make and receive calls. Fewer bars indicate
a weaker signal.
A call is in progress.
The phone is not receiving a signal. You
cannot make or receive calls.
The phone is roaming outside of its home
service area.
You have a text message.
( indicates the message is urgent.)
You have a voice message.
The battery is fully charged. The more
green you see, the greater the charge.
The alarm clock is set.
The phone is in privacy mode or is
accessing a secure Web site.
High-speed (3G) data service is available
and active on your phone. Check with your
service provider for availability.
(blinking) The phone is sending
high-speed data.
(blinking) The phone is receiving
high-speed data.
High-speed data service is available, but the
phone is dormant.
The phone is at the home screen. To access
Menu, press the left softkey .
The phone is at the home screen. To access
Contacts, press the right softkey .
You have a voice/text message.
The phone is in camera mode.
Camera flash mode is ready.
Camera timer mode is ready.
Camera zoom mode is ready.
The phone is in video mode.
PAG E 8|PERFORMING BASIC FUNCTIONS|GETTING STARTED
The phone is set to light up instead
of ring.
The phone is set to vibrate or to vibrate and
then ring.
Position location is set to your service
provider and to emergency services.
Position location is set to emergency
services only.
2 MAKING AND ANSWERING CALLS
Making a call
Make sure you are in an area where a signal can be received. Look for the symbol on the home
screen. The more bars you see in this symbol, the stronger the signal. If there are no bars, move to
where the signal strength is better.
When the phone has been idle for a time, it changes to power save mode. Press any key to return to
normal operating mode.
Slide open
1. Enter the phone number and press the
Send/Talk key .
Voice dialing a number without a voice tag:
1. From the home screen, press the Send/Talk
key to initiate voice dialing.
2. Press the End/Power key or close slide
(if “Close to End” is enabled. See “Ending
calls using the slide” on this page).
Slide closed
You can select a contact from your Contacts list
or use the voice dialing feature to initiate a call
with the slide closed. See “Creating a voice tag
for a contact” on page 80.
Voice dialing for a contact with a voice tag:
1. From the home screen, press the Send/Talk
key to initiate voice dialing.
2. Say the name of the contact when
prompted. The phone places the call.
3. When finished, press End/Power key .
2. Say the word “dial.”
3. Speak the phone number one digit
at a time.
4. The phone places the call. When finished,
press End/Power key once.
5. For complete Voice dialing instructions, see
page 80.
Ending calls using the slide
You can set the phone to end calls immediately
when you close the slide.
•Select Menu
→ Settings →
Convenience → Close to End → Enabled.
• Select Disabled to have the phone call
continue when you close the slide.
Answering a call
When a call comes in, the phone rings, vibrates,
or lights up. The phone number of the caller also
appears if it is not restricted. If the number is
stored in your Contacts directory, the contact
name appears.
PAG E 9|MAKING A CALL|MAKING AND ANSWERING CALLS
Slide open
• Press the Send/Talk key to answer the
incoming call.
- or -
• Press the speaker key to answer the
incoming call and turn on the
speakerphone.
Slide closed
• Press the Send/Talk key to answer
the call.
Answering calls using the slide
You can set the phone to answer immediately
when you open the slide. This feature does not
apply to incoming data or fax calls.
• Select Menu
Convenience
→ Settings →
→ Open to Answer →
Enabled.
• Select Disabled to have the phone
continue ringing when you open
the slide.
Adjusting the volume during a call
• To adjust the earpiece volume during a call,
press the volume key on the side of the
phone up or down.
Silencing an incoming call
• Press the End/Power key or the left
softkey .
Note: In the absence of voicemail, this
feature drops the call.
- or -
• Press the End/Power key then press the
Send/Talk key to answer the call.
This action silences the current call only.
The next call will ring as normal.
Redialing a number
• To redial a recent call, press the Send/Talk
key twice to open your Recent Calls list.
Highlight a phone number or name and
press the Send/Talk key .
Tip: To redial the last number called,
received, or missed, press the
Send/Talk key three times.
Calling a saved number
If you have already saved a phone number, you
can use the Contacts list to find it quickly.
1. From the home screen, press the right
softkey to select Contacts.
2. Scroll down the list to find the contact you
want to call.
3. Highlight the name and press the Send/Talk
key to dial the number.
PAG E 10|SILENCING AN INCOMING CALL|MAKING AND ANSWERING CALLS
Using the speakerphone
Your Amp’d MobileTM Jet has a
built-in speakerphone.
• To turn on the speaker, open the slide and
press the speaker key . If you press the
speaker key during an incoming call
alert, you answer the call.
• The icon at the top of the phone screen
indicates that the speakerphone is on.
• To turn off the speakerphone, open the slide
and press the speaker key .
Setting the phone to hold calls
The Hold Call feature allows you to place
incoming calls on hold until you are ready to
answer them.
Note: This feature will not work if “Open to
Answer” is enabled. See “Answering calls
using the slide” on page 10.
1. Select Menu
Convenience
• If you have not recorded a hold message,
you will be prompted to record one, such
as “Please hold. I’ll answer in a minute.”
2. Record the message twice, as prompted.
→ Settings →
→ Hold Call → Enabled.
Placing a call on hold
You can place a call on hold once you have
enabled this feature.
Note: If you are already on a call and you receive
another call, you cannot place the
incoming call on hold. It will go
to voicemail.
1. When a call comes in, press the right
softkey to select Options, then scroll
down to select the Hold Call option. The
caller will be placed on hold and will hear
your recorded hold message.
2. To speak to the caller, select Answer Call.
- or To hang up without speaking to the caller,
select End Call.
Changing the hold message
1. Select Menu
→ Settings → Convenience →
Hold Call → Re-Record Msg and follow
the prompts.
2. Record the message twice.
3. Select Save or Options
(Play, Re-Record, or Exit).
3. Select Save or Options
(Play, Re-Record, or Exit).
The next time a call comes in, you will have the
option of placing it on hold.
PAG E 11|USING THE SPEAKERPHONE|MAKING AND ANSWERING CALLS
Dealing with missed calls
When you have missed a call, “Missed Call”
appears on your screen unless the caller
leaves a voicemail.
• To clear the screen, press the left softkey
to select OK.
• To view details of the call, press the right
softkey to select Calls then press the
Amp’d/OK key .
• To return the call, press the right softkey
to select Calls then press the
Send/Talk key .
Setting missed call alerts
You can set an alert to beep every five minutes
after you have missed a call.
1. Select Menu
→ Settings → Sounds →
Alerts → Missed Call Alert.
2. Select an option and press the
Amp’d/OK key .
Viewing recent call details
Details on the last 60 calls you made, received,
or missed are stored in the Recent Calls/All Calls
list and are identified by the following icons:
Viewing recent calls
1. Select Menu
→ Recent Calls.
2. Select a list: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
3. Highlight the number you want to view.
4. Press the left softkey to view a recent call
item or press the right softkey to
select Options:
• Save to add the phone number to the
Contacts list (if it is not already listed in
your Contacts list).
• Send Msg to send a text message to
the contact.
• Send Picture Msg to send a picture
message to the contact.
• Erase to erase the selected call record.
Note: If the phone number has been classified
as “secret,” you must enter your fourdigit lock code to view or edit it. For
information on the lock code,
see “Changing your lock code” on
page 58.
To classify a phone number as secret, see
“Creating a new contact” on page 20.
Outgoing call Incoming call
Missed call
Calling recent calls
Slide open or closed
1. Press the Send/Talk key twice.
2. Highlight the number you want to call and
press the Send/Talk key .
- or -
• Select Menu → Recent Calls →
• Highlight the number you want to call
PAG E 12|USING THE SPEAKERPHONE|MAKING AND ANSWERING CALLS
Outgoing Calls.
and press the Send/Talk key .
Erasing recent calls
1. Select Menu
→ Recent Calls →
Erase Call Lists.
2. Select an option: All Calls, Incoming Calls,
Outgoing Calls, or Missed Calls.
3. Press the left softkey to select Yes.
Speed dialing
Before you can use speed dialing, you must save
a phone number as a contact and assign a speed
dial location to it.
• To add a speed dial location to a saved or
new contact, see “Customizing a phone
number” on page 22.
Using speed dialing
To call a contact that has a speed dial location:
• From the home screen, enter the
one- or two-digit speed dialing location
and press .
1-Touch dialing
1-Touch dialing is the fastest way to speed dial a
contact that has a speed dial location.
Note: You must (1) enable 1-Touch dialing on
your phone and (2) have a speed dial
location assigned to a contact.
Enabling 1-Touch dialing
• Select Menu
Convenience
Enabled.
→ Settings →
→ 1-Touch Dialing →
Using 1-Touch dialing
To call a contact that has a speed dial location:
• From the home screen, press and hold the
speed dialing number. If it is a two-digit
number, press the first digit briefly, then
press and hold the second digit. For
example, if the speed dialing location is 15,
press the “1” key briefly, then press
and hold the “5” key .
Setting up voicemail
Before your phone can receive voicemail
messages, you must set up a password and
record a personal greeting with your service
provider. When you have set up your voicemail,
all unanswered calls to your phone are
automatically transferred to voicemail, even if
your phone is in use or turned off.
1. From the home screen, press and hold the
“1” key .
2. Follow the system prompts to create a
password and record a greeting.
Note: If you are having trouble accessing your
voicemail, contact your service provider.
Checking voicemail messages
When a voice message is received, your screen
displays “New Messages” along with the
symbol at the top of your screen. The symbol
flashes if the message is urgent.
PAG E 13|SPEED DIALING|MAKING AND ANSWERING CALLS
If you see “New Messages” or “New Alerts”
Slide open or closed
1. Press the left softkey to select Call,
which initiates a call to your
voicemail number.
2. Follow the prompts to retrieve the message.
To clear the screen without
checking messages:
1. Press the right softkey to select Options.
2. Select Ignore to clear the screen.
3. Select Calls to view information about
the calls.
If you see only the symbol
Slide open
1. Press and hold the “1” key to initiate a
call to your voicemail number.
2. Follow the prompts to retrieve the message.
• You can set the phone to beep or vibrate
every five minutes to remind you that you
have voicemail. See “Setting message
alerts” on page 55.
Slide closed
1. Select Menu → Messages → Voicemail.
2. Press the left softkey to retrieve
your voicemail.
Calling emergency services
Note: Regardless of your 3-digit emergency
code (911, 111, 999, 000, etc.), your
phone operates as described below.
• Dial your 3-digit emergency code and
press the Send/Talk key .
You can call the code even if your phone is
locked or your account is restricted. When you
call, your phone enters Emergency mode. This
enables the emergency service exclusive access
to your phone to call you back, if necessary. To
make or receive regular calls after dialing the
code, you must exit this mode.
To exit Emergency mode
When you have completed the emergency call:
1. Press the Amp’d/OK key to select Exit.
2. Press the Amp’d/OK key again to
confirm your choice.
Note: To determine who has access to your
location, see “Setting position location”
on page 60.
Tracking calls
You can track the number and duration of calls
made and received on your phone.
1. Select Menu
→ Recent Calls.
2. Select a timer:
• Recent Calls Timer tracks all calls you
have made and received since you last
reset this timer. To reset this timer to
zero, press the right softkey to
select Reset.
• All Calls Timer tracks all calls you have
made and received. This timer cannot
be reset.
PAG E 14|SETTING UP VOICEMAIL|MAKING AND ANSWERING CALLS
Timing your calls
You can set your phone to beep 10 seconds
before each minute passes when you are
on a call.
• Select Menu
Minute Alert
→ Settings → Sounds →
→ Enabled.
Roaming
Setting an alert for roaming
You may use this setting if you want the phone
to alert you when you roam outside of your
home service area.
1. Select Menu
Roam/Svc Alert.
2. Select an option and press the
Amp’d/OK key .
• When no svc alerts you with three tones
decreasing in pitch when service is lost
and three tones increasing in pitch when
service is acquired again.
• On roam change alerts you with two
decreasing tones when roaming service
is acquired and three increasing tones
when home area service is
acquired again.
• On any change alerts you with three
increasing tones if there is a change in
roaming service or three decreasing
tones if the phone loses service.
Setting the roam ringer
You can set a ringer to indicate when an
incoming call will be subject to roaming charges.
• Select Menu
Roam Ringer → Enabled.
→ Settings → Network →
→ Settings → Sounds →
Setting Call Guard
You can set the phone to warn you before you
answer or place a call while roaming.
•Select Menu
Convenience
→ Settings →
→ Call Guard →
Call Prompt.
• The phone now emits a distinctive roam
ring to indicate when you are roaming
during calls.
• To accept or place a call while roaming,
you must press the “1” key .
Note: Call Prompt is disabled when the phone
is in Emergency Mode.
Using your phone in an airplane
While in an airplane, it is normally required that
you turn off your mobile phone because it emits
RF signals that interfere with air traffic control.
In Airplane mode, however, your phone will not
emit RF signals. You cannot make or receive
calls, send text messages, or use the Web, but
you can play games, use the Scheduler, set the
clock, and make emergency calls to designated
emergency numbers.
Note: Please check with uniformed personnel
before operating your phone in
Airplane mode.
Setting Airplane mode
1. Select Menu
Convenience
2. Press the Amp’d/OK key to select OK
after reading the message.
3. Select Disabled or Enabled.
→ Settings →
→ Airplane Mode.
PAG E 15|ROAMING|MAKING AND ANSWERING CALLS
3 ENTERING LETTERS, NUMBERS, AND SYMBOLS
You can enter letters, numbers, and symbols in contacts, text messages, and your banner.
Understanding text entry screens
The current text entry mode (and capitalization
setting, when applicable) are indicated by icons.
characters remaining
text entry field
Text entry modes
There are six text entry modes:
Case change Numbers only
Normal alpha Add Symbol
Rapid Entry Add Smiley
Note: The mode you start in depends on the
task you are doing. For example, when
entering a phone number, you’re in
number mode. When entering a name for
a contact, you’re in normal text mode. See
“Changing modes” on page 17.
capitalization setting
text entry mode
Entering words letter by letter
1. Press a key once for the first letter, twice for
the second letter, and so on.
2. Wait for the cursor to move right and enter
the next letter.
Note: To enter a space, press the
# Space key .
Entering words quickly
When you press a series of keys using mode,
checks its dictionary of common words and
guesses at the word you are trying to spell.
1. For each letter of the word you want, press
the key once. For example, to enter the
word “any” press the numbers 1, 6, and 9
( ).
2. If the word doesn’t match what you want,
press the 0 Next key to look at other
word matches.
3. When you see the word you want, press the
Navigation key right.
Entering numbers
• To enter a number while in mode, press
a number key once.
• To enter a number while in or mode,
press and hold a number key until the
number appears on the screen.
PAG E 16|UNDERSTANDING TEXT ENTRY SCREENS|ENTERING LETTERS, NUMBERS, AND SYMBOLS
Entering symbols
While entering text, you can enter symbols by
pressing the “1” key until you see the
symbol you want. Using this method, you have
access to the following symbols:
.@?!-,&:‘1
To access the full set of symbols:
1. From the text entry screen, select Options.
2. Select
Add Symbol.
3. Press down to view the list of symbols.
4. Press the number key corresponding to the
symbol you want.
Entering smileys
1. From the text entry screen, select Options.
2. Select
Add Smiley.
3. Press the Navigation key down to view
the list of smileys.
4. Press the number key corresponding to the
smiley you want.
Switching default text entry modes
You can change the default text entry mode
when creating a text message. This setting
applies only to the message body field, not the
“To” field.
1. Select Menu
Msg Settings
→ Messages →
→ Default Text.
Changing modes
Sometimes you need to change modes. For
example, to enter numbers in an email address
while in mode, you must change to
mode, enter the numbers, and then change
back to mode to complete the address.
To change text entry modes:
• Press and hold the *Shift key until the
icon to change the mode. Each time you
press and hold *Shift key , the text entry
mode changes the icon that appears at the
top of the screen.
- or -
•Select Options then select a different mode.
Capitalization settings
• You can change capitalization at any time
while entering text. Simply press the * Shift
key to choose uppercase, lowercase, or
initial caps while in Normal Alpha mode.
2. Select Normal Alpha or Rapid Mode.
PAG E 17|UNDERSTANDING TEXT ENTRY SCREENS|ENTERING LETTERS, NUMBERS, AND SYMBOLS
Quick reference to text entry
This table gives general instructions for entering letters, numbers, and symbols.
To... Do this...
Enter a letter
Enter a number
Enter a symbol
Enter a smiley
Enter a space
Erase a character
Erase all characters
Move the cursor right or left
Move the cursor up or down
Use mode and press a key until you see the letter you want.
For more information, see page 16.
Use mode and press a key once to enter its number.
For more options, see page 16.
Press the “1” key until you find the symbol you want.
See page 17.
Use mode and press the associated number key.
Press the # Space key .
Press .
Press and hold .
Press the Navigation key right or left.
Press the Navigation key up or down.
Move the cursor back and
Press the Navigation key up or down.
forth between the
Sent To: and Message: fields
Change text entry modes
PAG E 18|UNDERSTANDING TEXT ENTRY SCREENS|ENTERING LETTERS, NUMBERS, AND SYMBOLS
Press and hold the * Shift key . Repeat until the mode you want
is displayed.
To... Do this...
Capitalize any letter
Make any letter lowercase
Initial caps
Select soft options on
the screen
In mode, press the * Shift key .
Choose .
In mode, press the * Shift key . Choose .
In mode, press the * Shift key . Choose .
Press the left softkey or the right softkey key beneath the
option on the screen.
PAG E 19|UNDERSTANDING TEXT ENTRY SCREENS|ENTERING LETTERS, NUMBERS, AND SYMBOLS
4 STORING CONTACTS
Use your phone’s Contacts directory to store information about a person or company. Each contact
entry can have up to six phone numbers, two email addresses, two Web addresses, two street
addresses, and a space for notes.
Creating a new contact
1. From the home screen, enter the phone
number you want to save, including the
area code.
2. Press the left softkey to select Save.
3. Press the Amp’d/OK key to select
Save New Contact.
4. Enter a name for the contact.
• If you need to learn how to enter letters,
see “Understanding text entry screens”
on page 16.
• To add a symbol or smiley to the
contact name, or to change the text
entry mode, press the right softkey
to select Options.
5. You can save the contact now, or input
additional contact information.
• To save now, press the left softkey to
select Save.
• To enter additional phone numbers,
street address, email and Web addresses,
or notes, press the Navigation key
down repeatedly. For help switching
between numbers and letters for email
or Web addresses, see “Changing
modes” on page 17.
Adding a code or extension
When you save the phone number of an
automated service, you may include a pause to
stop dialing, for example, where you would wait
to dial an extension.
1. From the home screen, enter the first
portion of the phone number.
2. Press the right softkey to select Options.
3. Select a type of pause:
• Time Pause ()
• Hard Pause ()
X
4. Enter the remaining numbers.
5. Press the left softkey to select Save.
Customizing your contacts
You can customize each contact in your
Contacts directory by assigning ringers, pictures,
and number types.
PAG E 20|CREATING A NEW CONTACT|STORING CONTACTS
Assigning ringers
1. Press the right softkey to
select Contacts.
2. Highlight a contact and press the
Amp’d/OK key .
3. Highlight the contact name and press the
right softkey to select Options.
4. Select Ringer
→ Assign Ringer.
5. Scroll down the list to hear the different
ringers and press the Amp’d/OK key
to select one.
Assigning pictures
1. Press the right softkey to
select Contacts.
2. Highlight a contact and press the
Amp’d/OK key .
3. Highlight the contact name and press the
right softkey to select Options.
4. Select Picture
→ Assign Picture → Images.
5. Select Saved Images, Wallpapers, or
Caller IDs.
6. Scroll through the list to view your options
and press the left softkey to assign it to
your contact.
Assigning number types
When you assign a number type, an icon is
placed in front of a contact number to specify
the type of number, such as work, home,
or mobile.
1. Press the right softkey to
select Contacts.
2. Highlight a contact and press the
Amp’d/OK key .
3. Highlight the contact number and press the
left softkey to select Edit.
4. Press the Navigation key down to the
desired number.
5. Press down again, then press the right
softkey to select Options.
6. Highlight an option to designate the
number as General, Work, Home, Mobile,
Pager, or Fax and press the Amp’d/OK
key . You can also add email addresses,
street addresses, Web page URLs, and a
note. The associated icon will appear next to
the entry in your Contacts directory and
Recent Calls list.
general fax
work email address
home street address
mobile web page URL
PAG E 21|CUSTOMIZING YOUR CONTACTS|STORING CONTACTS
pager note
Loading...