Kyocera iBurst, iBurst UTC User Manual

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 1 -

Hirao Yamamoto

Koyama

Designed

Checked

Approved

January 15, 2007

Date:

1.01

Revision:

Q34T-EE-003

Reference:

For Windows Vista

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 2 -

Revision History

Revision

Author Date Detail

1.00 Hirao Jan. 12, 2007 First Edition but not officially released.

1.01 Hirao Jan. 15, 2007 A few words corrected.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 3 -

CONTENTS

CONTENTS CONTENTS

CONTENTS

Safety Precautions on iBurst Modem

Safety Precautions on iBurst ModemSafety Precautions on iBurst Modem

Safety Precautions on iBurst Modem ................................

................................................................

............................................

........................

............ 4444

Chapter 1

Chapter 1Chapter 1

Chapter 1 Introduction

IntroductionIntroduction

Introduction ................................

................................................................

..............................................................

............................................................

.............................. 6666

Components List

Components ListComponents List

Components List................................

................................................................

...............................................................

..............................................................

............................... 7777

Outlook of iBurst Modem

Outlook of iBurst ModemOutlook of iBurst Modem

Outlook of iBurst Modem ................................

................................................................

.................................................

..................................

................. 7777

Requirements on your PC

Requirements on your PCRequirements on your PC

Requirements on your PC ................................

................................................................

................................................

................................

................ 8888

Outlook to use the iBurst Modem

Outlook to use the iBurst ModemOutlook to use the iBurst Modem

Outlook to use the iBurst Modem ................................

................................................................

....................................

........

.... 8888

Indicators

IndicatorsIndicators

Indicators ................................

................................................................

..........................................

....................

.......... 8888

Chapter 2

Chapter 2Chapter 2

Chapter 2 Setup Procedure

Setup ProcedureSetup Procedure

Setup Procedure ................................

................................................................

........................................................

................................................

........................ 9999

iBurst Software Installation

iBurst Software InstallationiBurst Software Installation

iBurst Software Installation .............................................................................................................. 10

Connection Settings

Connection SettingsConnection Settings

Connection Settings ............................................................................................................................ 14

To connect again

To connect againTo connect again

To connect again .................................................................................................................................. 18

To disconnect

To disconnectTo disconnect

To disconnect........................................................................................................................................ 20

Tips for useful connection settings

Tips for useful connection settingsTips for useful connection settings

Tips for useful connection settings .................................................................................................... 20

Chapter 3

Chapter 3Chapter 3

Chapter 3 Utility

Utility Utility

Utility Software

SoftwareSoftware

Software ................................

................................................................

......................................................

............................................

...................... 22

2222

22

Chapter 4

Chapter 4Chapter 4

Chapter 4 Uninstallation

UninstallationUninstallation

Uninstallation ................................

................................................................

.........................................................

..................................................

......................... 29

2929

29

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 4 -

Safety Precautions on iBurst

Safety Precautions on iBurst Safety Precautions on iBurst

Safety Precautions on iBurst Modem

ModemModem

Modem

• Things you must know

• When using the product, use it correctly according to the safety precautions.

• The product uses particular radio frequency band tuned for the network operator.

• The safety precautions, hardware, software, and the design of the product may be changed

in the future without any announcement to the customers.

• About use restriction

• The product is designed as an OA apparatus for home use. Please use it neither in the

medical apparatus directly to affect a human life, nor the system of which very high reliability is required.

• Do not use the product in the zone where the wireless machines are forbidden, such as an airplane and a hospital. An electric device and medical apparatus are affected and it becomes the cause of the accident.

• About Qualification

• Our company does not take any responsibility about the damage produced by use under

the conditions such as natural disasters, earthquake, flood, fires, misuse by intent or carelessness or other than the responsibility of our company.

• Our company does not take any responsibility about the damage produced by external factor, failure, malfunction, and fault of product, such as loss of enterprise profits, enterprise discontinuation, change and disappearance of the contents of memory etc.

• Our company takes no responsibility about the damage produced by not keeping the written contents of an owner's manual.

• Our company takes no responsibility about the damage produced from incorrect operation in combination with the connection apparatus and software in which our company is not participating etc.

• iBurst ™ is a registered trademark of ArrayComm, Inc.

• Windows and Windows Vista are registered trademarks of Microsoft Corporation.

• In addition, the name of the software carried in this document and peripheral equipment is

each company’s trademark, or a registered trademark.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 5 -

• For your safety

-------- Danger

Danger Danger

Danger --------

----------------

--------

(If used improperly, may cause death or serious injury.)

• Do not use with an abnormal condition, such as with emission of smoke or odor. It may cause fire or electric shock.

• Do not disassemble or remodel the product. It may cause fire or electrical shock.

• Do not use or place the product at places with high humidity such as in the bath room or

near the humidifier. It may cause fire or electric shock. And do not touch the product with wet hands.

------- Warning

Warning Warning

Warning ------

------------

--------

----

--

(If used improperly, may cause disability or physical damage.)

• Do not give a shock strong against the product, such as dropping and throwing. It becomes the cause of failure. Moreover, do not ride on the product. It may become the cause of an injury.

• Do not put the product under direct sunshine or near equipment with high temperature such as a stove and a heater. It may raise the temperature of the interior and cause fire.

• Do not put the product at places with an extreme fluctuation of temperature, such as near the air conditioner or a heater. The dew condensation may occur in the interior and cause fire, electrical shock, and malfunction.

• Do not put the product at places with oil and steams such as in the kitchen. In addition, do not put it at dusty places and places where metal powder and toxic gas occur. It may cause fire or electric shock.

• Do not place the product on unstable places such as on an unsteady desk or slanted surfaces. In addition, do not put any object on the product. It may loose balance and tumble, or fall and cause injury.

• When the thunder occurs in near, do not use the product and its peripheral equipment. It may become the cause of an electric shock.

• Do not touch the connector pins directly with your hands. Static electricity may affect the components. As static electricity is created from both the cloth and the human body, before putting or removing the product, release static electricity by touching a metal object such as a small cabinet.

• Do not use it in the intense place of vibration. It becomes the cause of failure.

-------- Caution

CautionCaution

Caution --------

(If treated improperly, the equipment may not perform or work properly.)

• Do not put the product at low temperature. The product may not function properly.

• Do not put the product on the top of magnetic objects and places where electromagnetic

waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV, radio, fluorescent light, inverter air conditioner, and electric kitchen appliances). The product will not be able to make communication properly if effected by magnetism or electronic noise. Putting the product near TV or radio may cause RF receive error.

• The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot spring.

• Data communication will be disabled or a data file may corrupt if the PC is turned off or the product is separated from the PC during the communication. Important data must be verified against the original data.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 6 -

Chapter 1

Chapter 1Chapter 1

Chapter 1 Introduction

IntroductionIntroduction

Introduction

7

This chapter

This chapter This chapter

This chapter describes

describes describes

describes what should b

what should bwhat should b

what should be

e e

e confirmed

confirmed confirmed

confirmed before

before before

before

using iBurst

using iBurst using iBurst

using iBurst Modem

ModemModem

Modem....

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 7 -

NOTE: This manual covers only for Windows Vista (x86).

Components List

Components List Components List

Components List

The table below shows the list of components. Please confirm items in the package.

Card model

Component

ComponentComponent

Component

Notes

NotesNotes

Notes

Q’

Q’Q’

Q’

ty

tyty

ty

iBurst Modem New model / Original model

Refer to the pictures shown below.

1

Outlook of iBurst

Outlook of iBurst Outlook of iBurst

Outlook of iBurst Modem

Modem Modem

Modem

New model

PC card connector

External antenna port

Power Indicator

Link/Communication Indicator

Original model

PC card connector

Antenna

Power Indicator

Link/Communication Indicator

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 8 -

Requirements on your PC

Requirements on your PCRequirements on your PC

Requirements on your PC

• PC/AT Compatible PC with Windows Vista (x86 based).

• PCMCIA Type II slot complied with the PC card standard 95 or later.

Outlook to use the iBurst

Outlook to use the iBurst Outlook to use the iBurst

Outlook to use the iBurst Modem

ModemModem

Modem

A card model shall be plugged into a PC card slot of your PC. Before inserting it, you have to

install iBurst software which includes device drivers. Please read through every sections related

with the operating system for details.

Indicator

IndicatorIndicator

Indicators

s s

s

The table below describes meaning of each indicator.

Indicator State Meaning

Power Indicator OFF Turned OFF Blue Turned ON Red Fault Link/Communication Indicator OFF Turned OFF Amber No signal receiving Yellow Weak signal receiving

Blinking when communicating.

Green Strong signal receiving

Blinking when communicating.

Insertion of iBurst Modem

PC card slot

iBurst Modem

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 9 -

Chapter 2

Chapter 2Chapter 2

Chapter 2 Setup Procedure

Setup ProcedureSetup Procedure

Setup Procedure

This chapter describes how to install

This chapter describes how to install This chapter describes how to install

This chapter describes how to install iBurst software,

iBurst software,iBurst software,

iBurst software, then

then then

then

guides you how to make a network connection so as to use

guides you how to make a network connection so as to use guides you how to make a network connection so as to use

guides you how to make a network connection so as to use

data communication service.

data communication service.data communication service.

data communication service.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 10 -

NOTE: This manual covers operations only for Windows Vista (x86).

iBurst Software Installatio

iBurst Software InstallatioiBurst Software Installatio

iBurst Software Installation

n n

n

This section shows the procedure to install iBurst software on Windows Vista (x86) for utilizing

iBurst Modem. The procedure shall be done once before using it.

ATTENTION: Don’t choose “PCIC Compatible” mode of PC card controller in BIOS menu if

your PC has such menu. Please choose “Auto-Selected” or “CardBus/16bit” if

BIOS has it. There is a case that some models of PCs cannot drive iBurst

Modem due to BIOS or PC card driver problem.

ATTENTION: If you installed the iBurst software not for Windows Vista or you updated

Windows from XP or older, you have to uninstall the existing iBurst software

first. Otherwise performance and/or throughput through iBurst Modem may

be restricted.

1. Make sure to remove the iBurst Modem from your PC.

ATTENTION:

Don

DonDon

Don’’’’t

t t

t plug

plugplug

plug the

the the

the iBurst Modem

iBurst ModemiBurst Modem

iBurst Modem into

into into

into your PC until completion of installation.

your PC until completion of installation.your PC until completion of installation.

your PC until completion of installation.

2. Turn your PC on.

3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or

execute the appropriate installation software.

4. When Windows prompts [User Account Control], click [Allow] to proceed installing.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 11 -

5. The software will show progress of preparation.

6. iBurst Setup starts. Click the [Next >] button.

7. Read through the license agreement. If you can agree it, select [I accept the terms the license

agreement] and click the [Next >] button.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 12 -

8. Click the [Next >] button after appearing dialog window as shown below.

NOTE: To install to a different folder, click [Browse…] and specify another folder.

9. Click the [Next >] button.

10. The following dialog window will appear, and installation of software begins.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 13 -

11. When the installing process finishes, the dialog window shown below will appear. Select “Yes, I

want to restart my computer now” and click the [Finish] button in the dialog window.

12. After finish of restarting, plug the iBurst Modem into a PC card slot of your PC.

The iBurst Modem will be recognized and will be ready to use automatically. Only when the

iBurst Modem is plugged in at the first time, you will see installation status on balloon

messages as follows.

A balloon message when Windows detects the iBurst Modem as a new hardware.

A balloon message when Windows finishes installation of a new model of iBurst Modem.

A balloon message when Windows finishes installation of an original model of iBurst

Modem.

NOTE: To connect to the Internet, follow next pages.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 14 -

Connection Settings

Connection Settings Connection Settings

Connection Settings

The steps in this section are required only when the first connection to create a connection settings

through iBurst.

1. Make sure to plug the iBurst Modem into a PC card slot of your PC.

2. Click the [Start] button and click [Connect To] as shown below; or

oror

or

Right click on the network icon at the task tray and select [Connect to a network].

3. Click [Set up a connection or network] in the [Connect to a network] display.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 15 -

4. Select [Connect to the Internet] and click the [Next] button.

5. Select [Broadband (PPPoE)].

6. Enter user name and password assigned by the internet service provider (ISP) you subscribed.

It is recommended to enable [Remember this password]. Any connection name is acceptable

but this manual uses [iBurst] as an example of a connection name. It is not recommended to

enable [Allow other people to use this connection]. And then, click the [Connect] button.

Enabling it is recommended.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 16 -

7. The dialog shows [Connecting to <the connection name>…] in several seconds.

8. After connected, the dialog shows [Testing your Internet connection…] in several seconds.

9. When the dialog shows [You are connected to the Internet], click [Close] button. Of course you

may choose [Browsing Internet] to open the Internet Explorer.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 17 -

10. When the dialog shows [Set a location for the ‘<the connection name>’ network], click [Cancel]

button. Of course you may choose a location among them.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 18 -

To connect again

To connect again To connect again

To connect again

This section shows the procedure to connect to the Internet again through iBurst. You have to do

this every time before starting Internet accessing.

1. Click [Start] button and click [Connect To]; or

Right click on the network icon at the task tray and select [Connect to a network].

2. Choose the connection name for iBurst service and click [Connect].

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 19 -

3. When a dial-up connection dialog is popped up, fill items and click [Connect].

4. When connected successfully, click [Close].

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 20 -

To disconnect

To disconnect To disconnect

To disconnect

1. Right click on the network icon at the task tray, select [Disconnect from] and click the

appropriate connection name.

Tips for

Tips for Tips for

Tips for useful

useful useful

useful connection settings

connection settings connection settings

connection settings

When you open Internet Explorer, Windows Vista will attempt to make the Internet connectivity

according to a particular setting in the Internet Explorer if not connected. The tips below will

give you useful information.

1. When the dial-up connection dialog for iBurst service as shown below appears, it is

recommended to enable [Connect automatically]. This will make Windows Vista to connect to

the Internet without any your key action when Windows Vista needs the Internet connectivity.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 21 -

2. You can enable always connection on the [Internet Properties] as follows. In order to open the

dialog, open the Internet Explorer, select [Tools] -> [Internet Options]. You can find the

setting on [Connections] tab of the dialog.

Selecting

“

Always dial ...

”

is recommended

The

connection name of

iBurst service must be the default connection.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 22 -

Chapter 3

Chapter 3Chapter 3

Chapter 3 Utility

Utility Utility

Utility Software

SoftwareSoftware

Software

This chapter describes the features and usage of the

This chapter describes the features and usage of the This chapter describes the features and usage of the

This chapter describes the features and usage of the

Utility Software

Utility Software Utility Software

Utility Software for iBurst

for iBurst for iBurst

for iBurst Modem

ModemModem

Modem....

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 23 -

NOTE: This manual covers operations only for Windows Vista (x86).

To open the utility dialog.

1. To open the utility dialog, double click the icon on the computer’s task tray; or

click [Start] -> [All Programs] -> [iBurst Modem] -> [iBurst_Modem UTL]. When the dialog

opens, the [Link Info] pane will be displayed as shown below.

2. To close the utility dialog window, click the [OK] button, the [Cancel] button or the ‘X’ button at

upper-right corner of the dialog window.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 24 -

Link Info Pane

[Link Info] pane indicates several communication statuses about iBurst Modem.

The following descriptions are about each item on the pane.

(1) UTID

UTIDUTID

UTID

UTID is an identifier assigned to the iBurst Modem. This will be used for maintenance

support.

(2) Link

LinkLink

Link Status

StatusStatus

Status

This indicates current link status between the iBurst Modem and the access point.

Connect

ConnectConnect

Connect :::: The link is connected.

No Connect

No ConnectNo Connect

No Connect : The iBurst Modem is connected with your PC but the link is not

connected.

No

No No

No iBurst

iBurstiBurst

iBurst____Modem

ModemModem

Modem :::: There is no iBurst Modem connected with your PC.

(3) Link Speed

Link SpeedLink Speed

Link Speed

This indicates current bandwidth allocated automatically between the iBurst Modem and

a radio base station.

(4) Frame Error Rate

Frame Error RateFrame Error Rate

Frame Error Rate

This indicates current Frame Error Rate on the downlink air.

(1)

(2)

(3)

(4)

(5)

(6)

(7)

(8)

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 25 -

(5) Signal Strength

Signal StrengthSignal Strength

Signal Strength

This indicates current signal strength of the received radio signal. The signal bar

indicates the level visually in percentage and the status words are categorized according

to the percent level as follows.

No Signal :

No Signal :No Signal :

No Signal : 0%

Poor :

Poor :Poor :

Poor : In the range of 1 to 24%

Fair

FairFair

Fair :::: In the range of 25 to 49%

Good

GoodGood

Good : In the range of 50 to 74%

Excellent

ExcellentExcellent

Excellent :::: In the range of 75 to 100%

(6) Current Data Rate

Current Data RateCurrent Data Rate

Current Data Rate

This indicates current throughputs on both directions.

(7) Total Byte Received

Total Byte ReceivedTotal Byte Received

Total Byte Received

Total Byte Received indicates the total number of bytes received from the access point

since the communication link is established.

(8) Total Byte Sent

Total Byte SentTotal Byte Sent

Total Byte Sent

Total Byte Sent indicates the total number of bytes transmitted to the access point since

the communication link is established.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 26 -

Setup Pane

[Setup] pane can be displayed in the main dialog window by clicking the [Setup] tab. This pane

controls enabling/disabling to show each indicator on the [Link Info] pane.

The following descriptions are about each item on the pane.

(1) Selecting [ON] enables the corresponding indicator on the Link Info pane.

All are [ON] as the default.

(2) Selecting [OFF] disables the corresponding indicator on the Link Info pane.

(3) [Apply] button activates every setting above.

(4) [Reset] button enables and activates all settings above.

(5) [OK] button activates every setting above and close the dialog.

(6) [Cancel] button closes the dialog without activation of the settings.

(1)

(2)

(4)

(3)

(5)

(6)

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 27 -

About Pane

[About] pane shows the version information about software, hardware and copyrights.

The following descriptions are about each item on the pane.

(1) This shows the version number and the build date of this Utility Software.

(2) This shows the firmware version and the build date of it.

(3) This shows the hardware version and the manufactured date of the iBurst Modem.

(1)

(2)

(3)

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 28 -

Icon Display in task tray

When the Utility Software for iBurst Modem is running, an icon of the Utility Software will be

displayed in the task tray of the computer monitor according to communication status of the iBurst

Modem.

The table below shows icons with status descriptions.

Pointing on the iBurst icon on the task tray, a balloon indicates

Link Status, Total Byte Received,

Link Status, Total Byte Received, Link Status, Total Byte Received,

Link Status, Total Byte Received,

Total Byte Sent

Total Byte SentTotal Byte Sent

Total Byte Sent and Signal Strength

Signal StrengthSignal Strength

Signal Strength as shown below, but depending on the settings on the [Setup]

pane.

Icon

IconIcon

Icon

Status of

Status ofStatus of

Status of

iBurst Modem

iBurst ModemiBurst Modem

iBurst Modem

iBurst Modem is not connected with your PC.

There is no transmission nor reception on iBurst Modem.

iBurst Modem is transmitting data.

iBurst Modem is receiving data.

iBurst Modem is both transmitting and receiving data.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 29 -

Chapter 4

Chapter 4Chapter 4

Chapter 4 Uninstallation

UninstallationUninstallation

Uninstallation

This chapter describes how to uninstall

This chapter describes how to uninstall This chapter describes how to uninstall

This chapter describes how to uninstall iBurst software

iBurst softwareiBurst software

iBurst software....

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 30 -

NOTE: This manual covers operations only for Windows Vista (x86).

1. Close all programs currently running.

2. Remove the iBurst Modem from the computer safely.

3. Click the [Start] button, followed by selecting [Control Panel] to open the Control Panel, and

then click [Uninstall a program] beside the [Programs] icon.

4. Select [iBurst Modem] software, and click the [Uninstall] button.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 31 -

5. When Windows prompts [User Account Control], click [Continue] to proceed uninstalling.

6. The software will show progress of preparation.

7. Click the [OK] button after appearing dialog window as shown below.

iBurst

iBurst iBurst

iBurst Modem Card

Modem CardModem Card

Modem Card Model (U

Model (UModel (U

Model (UTTTTC)

C)C)

C) Manual

Manual Manual

Manual

Kyocera Corporation Q34T-EE-003 Rev. 1.01 Jan.15,2007

- 32 -

8. The following dialog window will appear, and uninstallation of software begins.

9. Click the [Finish] button after appearing dialog window as shown below.

[The end of this manual]

Kyocera iBurst, iBurst UTC User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual