Kyocera iBurst, IUU19AC Terminal User Manual

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 1 -

Uetani Yamamoto

Koyama

Designed

Checked

Approved

Octo

ber

28, 200

8 Date:

1.00 Revision:

S40T-EE-005 Reference:

For Windows Vista/XP

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 2 -

Revision History

Revision

Author Date Detail

1.00 Uetani Oct 28, 2008 First Edition

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 3 -

CONTENTS

CONTENTS CONTENTS

CONTENTS

Safety Precautions on iBurst Terminal

Safety Precautions on iBurst TerminalSafety Precautions on iBurst Terminal

Safety Precautions on iBurst Terminal ................................

................................................................

.......................................

..............

....... 4444

Chapter 1

Chapter 1Chapter 1

Chapter 1 Introduction

IntroductionIntroduction

Introduction ................................

................................................................

...........................................................

......................................................

........................... 6666

Components List

Components ListComponents List

Components List................................

................................................................

.....................................

..........

.....7777

Requirements on your PC

Requirements on your PCRequirements on your PC

Requirements on your PC ................................

................................................................

........................................................

................................................

........................7777

Outlook of iBurst Terminal

Outlook of iBurst TerminalOutlook of iBurst Terminal

Outlook of iBurst Terminal ................................

................................................................

......................................................

............................................

......................7777

Indicators

IndicatorsIndicators

Indicators................................

................................................................

...............................................

..............................

...............8888

Outlook to use the iBurst Terminal

Outlook to use the iBurst TerminalOutlook to use the iBurst Terminal

Outlook to use the iBurst Terminal................................

................................................................

...........................................

......................

........... 8888

Chapter 2

Chapter 2Chapter 2

Chapter 2 Setup Procedure

Setup ProcedureSetup Procedure

Setup Procedure................................

................................................................

.....................................................

..........................................

..................... 9999

Installation for Window

Installation for WindowInstallation for Window

Installation for Windows Vista/XP

s Vista/XPs Vista/XP

s Vista/XP..................................................................................................... 10

Connection Settings for Windows Vista

Connection Settings for Windows VistaConnection Settings for Windows Vista

Connection Settings for Windows Vista ............................................................................................ 14

Creating a connection and starting the connection

Creating a connection and starting the connectionCreating a connection and starting the connection

Creating a connection and starting the connection ................................

................................................................

...................................................

......................................

................... 14

1414

To disconnect

To disconnectTo disconnect

To disconnect ................................

................................................................

........................................

................

........ 17

1717

To connect again

To connect againTo connect again

To connect again ................................

................................................................

...................................

......

... 18

1818

Tips for useful connection settings

Tips for useful connection settingsTips for useful connection settings

Tips for useful connection settings ................................

................................................................

..........................................

....................

.......... 20

2020

Connection Settings for Windows XP

Connection Settings for Windows XPConnection Settings for Windows XP

Connection Settings for Windows XP ................................................................................................ 22

Creating a connection

Creating a connectionCreating a connection

Creating a connection................................

................................................................

............................................................

........................................................

............................ 22

2222

To connec

To connecTo connec

To connectttt ................................

................................................................

............................................

........................

............ 26

2626

To disconnect

To disconnectTo disconnect

To disconnect ................................

................................................................

........................................

................

........ 27

2727

Tips for useful connection settings

Tips for useful connection settingsTips for useful connection settings

Tips for useful connection settings ................................

................................................................

..........................................

....................

.......... 28

2828

Cha

ChaCha

Chapter 3

pter 3pter 3

pter 3 Utility Software

Utility SoftwareUtility Software

Utility Software ................................

................................................................

...................................................

......................................

................... 30

3030

Utility Software on Windows

Utility Software on WindowsUtility Software on Windows

Utility Software on Windows.............................................................................................................. 31

Chapter 4

Chapter 4Chapter 4

Chapter 4 Uninstallation

UninstallationUninstallation

Uninstallation................................

................................................................

......................................................

............................................

...................... 37

3737

Uninstallation for Windows Vista

Uninstallation for Windows VistaUninstallation for Windows Vista

Uninstallation for Windows Vista...................................................................................................... 38

Uninstallation for Windows XP

Uninstallation for Windows XPUninstallation for Windows XP

Uninstallation for Windows XP.......................................................................................................... 41

Appendix

AppendixAppendix

Appendix ................................

................................................................

..................................................

....................................

.................. 44

4444

Utility software will be not uninstalled when back

Utility software will be not uninstalled when backUtility software will be not uninstalled when back

Utility software will be not uninstalled when back----to

toto

to----date on Windows Vista

date on Windows Vistadate on Windows Vista

date on Windows Vista ............................. 45

Trouble when disabling a built

Trouble when disabling a builtTrouble when disabling a built

Trouble when disabling a built----in wireless LAN device on Windows PC

in wireless LAN device on Windows PCin wireless LAN device on Windows PC

in wireless LAN device on Windows PC ....................................... 45

FCC Compliance Statement

FCC Compliance StatementFCC Compliance Statement

FCC Compliance Statement............................................................................................................... 45

FCC RF Radiation Exposure Statement

FCC RF Radiation Exposure StatementFCC RF Radiation Exposure Statement

FCC RF Radiation Exposure Statement........................................................................................... 46

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 4 -

Safety Precautions on iBurst T

Safety Precautions on iBurst TSafety Precautions on iBurst T

Safety Precautions on iBurst Terminal

erminalerminal

erminal

• Things you must know

• When using the product, use it correctly according to the safety precautions.

• The product uses particular radio frequency band tuned for the network operator.

• The safety precautions, hardware, software, and the design of the product may be changed

in the future without any announcement to the customers.

• About use restriction

• The product is designed as an OA apparatus for home use. Please use it neither in the

medical apparatus directly to affect a human life, nor the system of which very high reliability is required.

• Do not use the product in the zone where the wireless machines are forbidden, such as an airplane and a hospital. An electric device and medical apparatus are affected and it becomes the cause of the accident.

• About Qualification

• Our company does not take any responsibility about the damage produced by use under

the conditions such as natural disasters, earthquake, flood, fires, misuse by intent or carelessness or other than the responsibility of our company.

• Our company does not take any responsibility about the damage produced by external factor, failure, malfunction, and fault of product, such as loss of enterprise profits, enterprise discontinuation, change and disappearance of the contents of memory etc.

• Our company takes no responsibility about the damage produced by not keeping the written contents of an owner's manual.

• Our company takes no responsibility about the damage produced from incorrect operation in combination with the connection apparatus and software in which our company is not participating etc.

• iBurst ™ is a registered trademark of ArrayComm, Inc.

• Windows and Windows Vista are registered trademarks of Microsoft Corporation.

• Mac OS X is a registered trademark of Apple Inc.

• In addition, the name of the software carried in this document and peripheral equipment is

each company’s trademark, or a registered trademark.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 5 -

• For your safety

-------- Danger

Danger Danger

Danger --------

----------------

--------

( If used improperly, may cause death or serious injury. )

• Do not use with an abnormal condition, such as with emission of smoke or odor. It may cause fire or electric shock.

• Do not disassemble or remodel the product. It may cause fire or electrical shock.

• Do not use or place the product at places with high humidity such as in the bath room or

near the humidifier. It may cause fire or electric shock. And do not touch the product with wet hands.

------- Warning

Warning Warning

Warning --------

----------------

--------

( If used improperly, may cause disability or physical damage. )

• Do not give a shock strong against the product, such as dropping and throwing. It becomes the cause of failure. Moreover, do not ride on the product. It may become the cause of an injury.

• Do not put the product under direct sunshine or near equipment with high temperature such as a stove and a heater. It may raise the temperature of the interior and cause fire.

• Do not put the product at places with an extreme fluctuation of temperature, such as near the air conditioner or a heater. The dew condensation may occur in the interior and cause fire, electrical shock, and malfunction.

• Do not put the product at places with oil and steams such as in the kitchen. In addition, do not put it at dusty places and places where metal powder and toxic gas occur. It may cause fire or electric shock.

• Do not place the product on unstable places such as on an unsteady desk or slanted surfaces. In addition, do not put any object on the product. It may loose balance and tumble, or fall and cause injury.

• When the thunder occurs in near, do not use the product and its peripheral equipment. It may become the cause of an electric shock.

• Do not touch the connector pins directly with your hands. Static electricity may affect the components. As static electricity is created from both the cloth and the human body, before putting or removing the product, release static electricity by touching a metal object such as a small cabinet.

• Do not use it in the intense place of vibration. It becomes the cause of failure.

-------- Caution

CautionCaution

Caution --------

( If treated improperly, the equipment may not perform or work properly. )

• Do not put the product at low temperature. The product may not function properly.

• Do not put the product on the top of magnetic objects and places where electromagnetic

waves occur. This includes electrical appliances, AV, and OA (microwave oven, speaker, TV, radio, fluorescent light, inverter air conditioner, and electric kitchen appliances). The product will not be able to make communication properly if effected by magnetism or electronic noise. Putting the product near TV or radio may cause RF receive error.

• The product lifetime may shorten if used at places with hydrogen sulfide such as at a hot spring.

• Data communication will be disabled or a data file may corrupt if the PC is turned off or the product is separated from the PC during the communication. Important data must be verified against the original data.

• When connecting the product onto PC via USB cable, use the enclosed USB cable.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 6 -

Chapter 1

Chapter 1Chapter 1

Chapter 1 Introduction

IntroductionIntroduction

Introduction

This chapter

This chapter This chapter

This chapter describ

describdescrib

describes what should be confirmed

es what should be confirmed es what should be confirmed

es what should be confirmed before

before before

before

using iBurst

using iBurst using iBurst

using iBurst Terminal

TerminalTerminal

Terminal....

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 7 -

Components List

Components List Components List

Components List

The table below shows the list of components. Please confirm items in the package.

USB model

Component

ComponentComponent

Component Notes

NotesNotes

Notes Q’

Q’Q’

Q’ty

tyty

iBurst Terminal Unit of USB model

*Refer to the picture shown below.

USB Extension Cable Type: USB1.1

Length: 1m

Holder *Refer to the picture shown below 1

Requirements on your PC

Requirements on your PC Requirements on your PC

Requirements on your PC

• PC/AT Compatible PC with Windows Vista/XP (x86 based); or

version 10.4 to 10.5 of Mac OS X. (Refer to the manual for Mac OS X.)

• 1 USB1.1 port or a later version of USB port.

Outlook of iBurst Terminal

Outlook of iBurst Terminal Outlook of iBurst Terminal

Outlook of iBurst Terminal

USB model

USB

connector

Link/Communication Indicator

Antenna

Holder

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 8 -

Indicator

IndicatorIndicator

Indicators

s s

The table below describes meaning of each indicator.

Indicator State Meaning

Link/Communication Indicator OFF Turned OFF Amber No signal receiving Yellow Weak signal receiving

Flashing when communicating.

Green Strong signal receiving

Flashing when communicating.

Amber/Yellow Fault (Flashing)

Outlook to use the iBurst Terminal

Outlook to use the iBurst Terminal Outlook to use the iBurst Terminal

Outlook to use the iBurst Terminal

A USB model shall be connected to a USB port of your PC directly or via USB cable. Before

connecting the USB interface, you have to install iBurst software which includes device drivers.

Please read through every sections related with the operating system for details.

USB Connection

USB Cable

UTU

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 9 -

Chap

ChapChap

Chapter 2

ter 2ter 2

ter 2 Setup Procedure

Setup ProcedureSetup Procedure

Setup Procedure

This chapter describes how to install

This chapter describes how to install This chapter describes how to install

This chapter describes how to install iBurst software,

iBurst software,iBurst software,

iBurst software, then

then then

then

guides you how to make a network connection so as to use

guides you how to make a network connection so as to use guides you how to make a network connection so as to use

guides you how to make a network connection so as to use

data communication service.

data communication service.data communication service.

data communication service.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 10 -

Installation

Installation Installation

Installation for

forfor

for Windows Vista/XP

Windows Vista/XP Windows Vista/XP

Windows Vista/XP

This section shows the procedure to install iBurst software on your PC for utilizing iBurst

Terminal. The procedure shall be done once before using it.

ATTENTION: If you have installed an old version of iBurst software or you updated Windows

version, you have to uninstall the existing iBurst software first. Otherwise

performance and/or throughput through iBurst Terminal may be restricted.

NOTE: All screen copies in this section are examples on Windows Vista.

1. Make sure to remove the iBurst Terminal from your PC. ATTENTION: Don

DonDon

Don’’’’t

t t

t plug

plugplug

plug the iBurst Terminal

the iBurst Terminal the iBurst Terminal

the iBurst Terminal into

intointo

into your PC until completion of installation.

your PC until completion of installation. your PC until completion of installation.

your PC until completion of installation.

2. Turn your PC on.

3. Insert the Software Utility CD provided by the network operator into your CD-ROM drive; or

execute the appropriate installation software.

4. On Windows Vista, click [Allow] to proceed installing when Windows prompts [User Account

Control].

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 11 -

5. The software will show progress of preparation.

6. iBurst Terminal Setup starts. Click the [Next >] button.

7. Read through the license agreement. If you can agree it, select [I accept the terms the license

agreement] and click the [Next >] button.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 12 -

8. Click the [Next >] button after appearing dialog window as shown below.

NOTE: To install to a different folder, click [Browse…] and specify another folder.

9. Click the [Next >] button.

10. The following dialog window will appear, and installation of software begins.

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 13 -

11. When the installing process finishes, the dialog window shown below will appear. Select [Yes, I

want to restart my computer now] and click the [Finish] button in the dialog window.

NOTE: Before restarting the PC, you can find an iBurst icon on the task tray.

12. After finish of restarting, plug the iBurst Terminal into an appropriate port. The iBurst

Terminal will be recognized and will be ready to use automatically. Only when the iBurst

Terminal is plugged into every port at the first time, you will see installation status on balloon

messages as follows.

NOTE: The pictures below are examples on Windows Vista.

A balloon message when Windows detects the iBurst Terminal as a new hardware.

A balloon message when Windows finishes installation of the iBurst Terminal.

13. To connect to the Internet, jump to the page listed below depending on Windows version.

Windows Vista  page 14

Windows XP  page 22

The iBurst icon will

be vari

ed when a UT

recognized

iBurst Terminal USB Model (UTU) Manual

Kyocera Corporation S40T-EE005 Rev.1.00 Oct.28.2008

- 14 -

Connection

Connection Connection

Connection Settings

SettingsSettings

Settings for Windows Vista

for Windows Vista for Windows Vista

for Windows Vista

Creating a connection and

Creating a connection andCreating a connection and

Creating a connection and starting the connection

starting the connection starting the connection

starting the connection

1. Make sure to plug the iBurst Terminal into your PC.

2. Click the [Start] button and click [Connect To] as shown below; or

oror

Right click on the network icon at the task tray and select [Connect to a network].

3. Click [Set up a connection or network] in the [Connect to a network] display.

+ 32 hidden pages

Kyocera iBurst, IUU19AC Terminal User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual