KYE SYSTEMS KMMLC610B User Manual

MLC-610B User’s Manual

1. Contents

- 2.4GHz Laser Mouse

- Nano Dongle

- Two AAA Battery

- Mouse Driver CD

- User’s Manual

2. Hardware Installation

- Open the battery cover from the bottom case

- Take off the Nano Dongle from battery compartment

- Close the battery door

- Plug Nano dongle into PC USB port

- Turn on the power switch

- Keep Mouse close to dongle waiting 5~8 seconds for connecting action. (When device
connecting blue led will blinking, when device finished connecting blue led will turn off.)

- When PC screen show find new input device information then user can start use mouse

3. Driver Installation

Notice: The driver supports Windows 2000 XP and Vista

- Installation driver CD could be automatically
Recognized once plugged in. In case it doesn’t work, please try below.

- Insert the driver CD → Double click “Setup.exe” and follow set-up instructions.

- A Mouse Setting icon will appear on the task bar.

- Setup step:

Driver Installation - MLC 610B

1. Double click “Setup.exe”

Follow set-up instructions

2. The InstallShield Wizard will install MLC 610B on your computer, click Next.

3. Select folder where setup will install files. Click Next.

4. Setup Status

5. Click Finish to complete setup.