KYE SYSTEMS GMZKT User Manual

Hardware Installation

1. You can connect the receiver to a USB port of a PC.

2. Install two AA batteries in the mouse as instructed.

3. Make sure that you have switched on the power switch underneath the mouse.

English

Button definitions in Windows 8:

1. Switch between Apps: Pressing the side button 1

allows you to switch between all open
applications.

2. Charms panel: Press side button 2 to open up the Charms panel.

3. Left Button: Provides traditional mouse functions like click, double click and drag.

4. Magic-Roller: Spin the “Magic-Roller” to surf the Internet, scroll within apps or any

Windows documents.

5. Right Button: Provides traditional mouse click functions.

6. When both buttons 1 and 2 are pressed at the same time, it will allow you to toggle

between Windows 8 Metro interface and the last app used.

-1-

English

Note:
When buttons 3, 4 and 5 are pressed at the same time, it
will allow you to change between Windows 8 and
traditional mouse function mode.

Button definitions in Windows 7/XP/Vista:

1. Previous Page: Go to last page of Internet Explorer

2. Next Page: Go to next page of Internet Explorer

3. Left Button: Provides traditional mouse functions like

click, double click and drag.

4. Magic-Roller: Press the “Magic-Roller” to surf the

Internet and Windows documents.

5. Right Button: Provides traditional mouse click functions.

6. DPI adjustment: The LED indicates will flash after you

press this button. Default is 1200 dpi, 800 dpi (1 flash),
1200 dpi (2 flashes), and 1600 dpi (3 flashes).

7. Flying Scroll: Press and hold to move vertically or

horizontally for 4-way scrolling. Please download 4-way
scrolling driver from Genius website at
www.geniusnet.com.

Note: Download the programmable driver from Genius website at www.geniusnet.com

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror.

2. The connection of the wireless device is factory preset, so when you plug the USB

receiver into any USB port, the connection between the micro receiver and the mouse will
be established automatically.

3. In case your PC did not install the hardware successfully, remove the micro receiver from

the USB port and go Human Interface Devices under Device Manager to remove the
mouse then plug in the micro receiver to a USB port again.

4. If you feel the mouse does not move smooth as usual, it is possible the batteries have lost

their charge so you need to replace them. Remember to put the batteries in the correct
direction.

-2-