KYE SYSTEMS GMZKQ User Manual

GM-130012/R(Pico Dongle) English

Hardware Installation

1. Connect the receiver to a USB port of a PC or Notebook.

2. Install one AA or AAA battery in the mouse as instructed.

3. Make sure that you have switched on the power switch underneath t he mouse.

4. Use the OTG cable to connect your tablet PC.

(OTG cable for Android OS 4.0 + for tablet PC and smart phones)

Mouse Button Assignments

1. Left Button: Provides traditional mouse functions like

click, double click and drag.

2. Magic-Roller: Press the “Magic-Roller” to surf the

Internet and Windows documents.

3. Right Button: Provides traditional mouse c lick funct io ns.

4. Change device Button: Press this button to change

another PC or Notebook device.

Note: Download the programmable driver from our website:

www.geniusnet.com

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is made of glass or

mirror.

2. The connection of the wireless device is factory preset, so when you plug the

USB receiver into any USB port, the connection between t he micro rece iver and
the mouse will be es tablished automatically.

3. In case your PC did not install the hardware success full y, re mo ve t he micro

receiver from the USB port and go Human Interface Devices under Device
Manager to remove the mouse then plug in the micro receiver to a USB port
again.

4. If you feel the mouse does not move smooth as usual, it is possible the battery ha s

lost its charge so you need to replace it. Remember to put the battery in the correct
direction.

1

GM-130012/R(Pico Dongle) English

FCC ID: FSUGMZKQ

FCC Compliance and Advisory Statement

FCC Warning：

Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user＇s authority to operate
the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and
on, the user is encouraged to try to correct the interference by one or more of
the
following measures:
_ Reorient or relocate the receiving antenna.
_ Increase the separation between the equipment and receiver.
_ Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
_ Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the
following two conditions : (1) this device may not cause harmful interference,
and
(2) this device must accept any interference received, including interference
that
may cause undesired operation

2