KYE SYSTEMS GMZKN Users manual

Traveler 6000,Traveler 6000X User Manual English

Hardware Installation

Note: Supports Windows 7/Vista/XP

1. You can connect the receiver to a USB port of a PC.

2. Install one AAA battery in the mouse as instructed.

3. Make sure that you have switched on the power switch underneath the
mouse.

Factory Settings

1. Left Button: Provides traditional mouse functions like click, double click

and drag.

2. Magic-Roller: Pr ess the “Magic -Roller” to surf the Internet and Windows

documents.

3. Right Button: Provides traditional mouse click functions.

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is made of

glass or mirror.

2. The connection of the wireless device is factory preset, so when you plug

the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.

3. In case your PC did not install the hardware successfully, remove the micro

receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.

4. If you feel the mouse does not move smooth as usual, it is possible the

batteries have lost their charge so you need to replace them. Remember to
put the batteries in the correct direction.

1

Traveler 6000,Traveler 6000X User Manual English

FCC Compliance and Advisory Statement

This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:(1) this device may not cause harmf ul interference, and (2) this device must accept
any interference received, incl uding interference that may cause undesired operation.
This equipment has been tested and found to comply wit h the limits for a Class B digital
device,
according to Part 15 of the FCC rules. These limits are designed to prov ide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not oc c ur in a particul ar installation. If this equipment does
cause harmful interference to radio or telev ision reception, which can be determined by
turning
the equipment off and on, the user is encouraged to try correct the interference by one or more
of the following measures:

1.Reorient the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into and outlet on a circuit dif ferent from that to which the receiver is

connected.

4.Consult the dealer or an experienced rad io/TV technician for help.

Any special accessories needed for compliance m ust be specif ied in the instruction manual.
Warning: A shielded-type power cord is required in or der to m eet F CC emi ssion limits and
also to prevent interference to the nearby radio and television reception. It is essential that
only the supplied power cord be used. Use only shielded cabl es to c onnec t I/O devices to this
equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.

2