KYE SYSTEMS GMZJW Users manual

ENGLISH

Hardware Installation

1. Install one AAA battery into the mouse and two AAA into the keyboard.

2. Plug in your USB receiver to a USB port of your PC.

ID Channel Setting and connection:

Follow these steps:

1. The Pico dongle is stored inside of the mouse, plug it into a USB port and wait

about 5-10 seconds.

2. Press the connect button on the mouse first, then the keyboard.

3. The connection will be executed and the kit will be ready for use.

Replace Batteries

If the mouse or keyboard does not work properly, then the batteries have lost their
charge, so you need to replace them.

Warning: do not mix or use different types of batteries at the same time.

“Warning (Trouble shooting)

1. In case the wireless device was not connected when you set the ID channel setting,

check if you have installed the batteries with the positive (+) and negative (-)
polarity in the correct position, then repeat the ID channel setting again.

1

ENGLISH

2. For optimum performance, please make sure that the distance between the

wireless device and the micro dongle receiver does not exceed 10M.

Keyboard hotkeys and Fn-Keys definition:

Fn Function keys:

+

Turn down the volume.

+

Turn up the volume.

+

Remove the sound.

+

Go back to the previous track

+

Play and pause the audio or video sources.

+

Stop play of audio or video CD.

2