KYE SYSTEMS GMZJ7 User Manual

English

Hardware Installation

Note: Supports Windows 7/Vista/XP.

1. Connect the pico receiver to a USB port of a PC or notebook.

2. Make sure that you have turned on the power switch.

Software Installation

1. Put the CD into the CD-ROM.

2. Follow the instructions on the screen to finish the software installation.

3. After installation, you’ll find the ioMedia icon in the taskbar.

ioMedia Software

ioMedia provides a fast setting for six scene modes. In each scene mode, each button has a
different function when you select it. Each feature is described on the next page.

1

English







i. Device Selection
ii. Scene Mode: Web Browsing, Music, Movie, Photo, Presentation and eBook
iii. Product Photo
iv. Button definition in each scene mode

Set: Save the setting. (※)

v.

Exit: Exit from ioMedia.
OK: Save the setting and exit from ioMedia. (※)

※※※※ Note:

(1). After you select each mode, the button function will not change immediately.

You can still move the cursor and execute the left and right button.

(2). Press  and  button together (as shown below) to execute the mode you have

selected. Press them together again to return to Mouse Mode.

(3). Press , and

ioMedia UI.

(4). When you change the mode each time, the taskbar will show in the message bar

Ring Mouse Function

1. Mouse Mode

OptoWheel Touch
Control Area

Left Button

Middle Button

Right Button Provides traditional right button functions.



button together to return to Mouse Mode and open the

to remind you.

Slide your thumb in the OptoWheel touch control area for
in-air cursor movement.
Press OptoWheel touch control area to execute the click
function.
Press Left button for three seconds to turn on Click Lock
function. This lets you drag an object when holding down
the mouse button. To release, click the left button again.
Provides traditional middle button function, like
auto-panning when the thumb is on the OptoWheel touch
control area.

2