KYE SYSTEMS GMZJ4 Users manual
ENGLISH
Hardware Installation
1. Install one AA battery into the mouse and two AAA into the keyboard.
2. Plug in your USB receiver to a USB port of your PC.
ID Channel Setting and connection:
Follow these steps:
1. The pico dongle is stored inside of the mouse, plug it into a USB port and wait
about 5-10 seconds.
2. Press the connect button on the mouse first, then the keyboard.
3. The connection will be executed and the kit will be ready for use.
Replace Batteries
If the mouse or keyboard does not work properly, then the batteries have lost their
charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same time.
“Warning (Trouble shooting)
1. In case the wireless device was not connected when you set the ID channel setting,
check if you have installed the batteries with the positive (+) and negative (-)
1
ENGLISH
polarity in the correct position, then repeat the ID channel setting again.
2. For optimum performance, please make sure that the distance between the
wireless device and the micro dongle receiver does not exceed 10M.
Keyboard hot key definition
+
+
+
+
+
+
+
+
Help Open Windows “Help” function
New Open the new file
Search file Search for a file or folder.
Undo Undo previous steps
Redo Cancel “Undo”
Previous Page Return to previous internet page
Next Page Go to next internet page
Stop Stop loading a web page
2
Loading...