KYE SYSTEMS GMZIT User Manual

English

Hardware Installation

Note: Supports Window s 7/Vista/XP/2000

1. You can connect the receiver to a USB port of a PC.

2. Install one AA battery in the mouse.

3. Turn on your computer. The mouse can now work.

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which

is made of glass or mirror.

2. The connection of the wireless device is factory preset, so

when you plug the USB receiver into any USB port, the
connection between the micro receiver and the mouse will

1

English

be established automatically.

3. In case your PC did not install the hardware successfully,

remove the micro receiver from the USB port and go
Human Interface Devices under Device Manager to
remove the mouse then plug in the micro receiver to a USB
port again.

4. If you feel the mouse does not move smooth as usual, it is

possible the batteries have lost their charge so you need to
replace them. Remember to put the batteries in the correct
direction.

Factory Settings

1. Left Button: Provides traditional

mouse functions like click, double
click and drag.

2. Magic-Roller: Press the

“Magic-Roller” to surf the
Internet and Windows documents.

3. Right Button: Provides

traditional mouse click functions

2