KYE SYSTEMS GMZIJ User Manual

ENGLISH

Hardware Installation

1. You can connect the receiver to a USB port of a PC.

2. Install two AA batteries in the mouse.

3. Turn on your computer. The mouse can now work.

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the CD driver into the CD drive.

3. Follow the instructions on the screen to finish the software
installation.

Warning: (Troubleshooting)

1. Please do not use wireless laser mouse on a desk, which is made of
glass or mirror.

2. The wireless laser mouse automatically selects the channel for your
mouse.

3. If you feel the mouse does not move smooth as usual, please check
the battery indicator on the mouse. If the batteries have lost their
charge, replace them. Remember do not put the batteries in the wrong
direction.

Not

e：

Class 1 Laser Product. Passed eye-safety regulation.(IEC 60825-1)

1

ENGLISH

Button Assignments

1. Press the side button as indicated and

gently slide your finger over the crystal
sensing area of the OptoWheel to
activate the turbo scroll function and
release the side button to disable.

2. Left Button: Provides traditional mouse

functions such
as click, double click and drag.

3. 8 way scroll function or Middle button: Gently slide your finger

over the OptoWheel to scroll in eight different directions to surf the
Internet and Windows documents or press the OptoWheel down to
activate the middle button function.

4. Right button: Provides traditional mouse click function

Note: Adjust dpi resolution

Press left and right button together for three
seconds, the resolution will switch from 1600 to
800 dpi. Press both buttons again for three seconds
and it will revert to 1600 dpi. The LED flash is
shorter for 800 dpi.

2