KYE SYSTEMS GMZHN Users manual

ENGLISH

Hardware Installation

1. Please press the button to remove the
receiver.

You can connect the receiver to a
USB port of a PC.

2. Install two AAA batteries in
the mouse.

3. Turn on your computer. The
mouse can now work.

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the CD driver into the CD drive.

3. Follow the instructions on the screen to finish the software

installation.

Warning: (Troubleshooting)

1. Please do not use wireless laser mouse on a desk, which is
made of glass or mirror.

2. The wireless laser mouse automatically selects the channel for
your mouse. You can only set up one wireless laser mouse at a
time and up to 16 mice in a 10 meters area.

3. If you feel the mouse does not move smooth as usual, please
check the battery indicator on the mouse. If the batteries have
lost their charge, replace them.
Remember do not put the batteries
in the wrong direction.

4. If the mouse does not have
connection to the receiver, press
the button on the receiver first and
then press the button under the
mouse for channel setting again.

1

Not

eeee

：：：：

Class 1 Laser Product. Passed eye-safety regulation

(IEC 60825-1) Please switch the button to "off" under the

mouse if you don't use it for a long time, and remove the
batteries if you do not use this device for at least two
weeks.

Factory Setting

ENGLISH

1. Left Button: Provides traditional mouse functions like click,
double click and drag.

2. Right Button: You can assign this button to frequently used
keyboard and mouse functions in addition to features like Easy
Jump, Auto-Panning, Zoom, etc.

3. Magic-Roller: Press the “Magic-Roller” to surf the Internet
and Windows documents.
Horizontal Scroll: Press the roller to the left and the cursor
scrolls to the left; press the roller to the right and the cursor
scrolls to the right.

4. Power indicator: If your battery power is low, the LED will

brighten.

Note: Adjust dpi resolution

Press left and right button together for three
seconds, the resolution will switch from
1600 to 800 dpi. Press both buttons again for
three seconds and it will revert to 1600 dpi.
The LED flash is shorter for 800 dpi.

2