KYE SYSTEMS GMZHJ Users manual

ENGLISH

Hardware Installation

1. You can connect the receiver to a USB port of a PC

2. Install two AA batteries in the mouse.

3. Turn on your computer. The mouse can be worked.
Not˸ˍʳIf the mouse does not have connection to the receiver, press the button
on the receiver first and then press the button under the mouse for channel
setting again.

Important: Remember do not put the batteries in the wrong direction; use the
same types of batteries. Also, keep all drinks away! If any spill occurs on the
receiver, unplug the USB connector first and clean the receiver immediately.
Please switch the button to "off" under the mouse once you don't use it for a
long time, and remove the batteries if you do not use this device for at least
two weeks.
W

arning: (Troubleshooting)

1. Please do not use wireless laser mouse on a desk, which is made of glass
or mirror. Also, a flat surface is necessary or the laser sensor will error
easily. When you use wireless laser mouse on a desk that is made of
metal, try using a pad and reduce the receiving distance.

2. The wireless laser mouse channel provides 16 channels and 256 ID-codes,
and it automatically selects the ID # for your mouse. You can only set up
one wireless laser mouse at a time.

1

ENGLISH

3. If the power indicator is on (see Button Assignments), then the
batteries have lost their charge, so you need to replace them.

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the CD driver into the CD drive.

3. Follow the instructions on the screen to finish the software installation.

Security Function Setting:

1. After you install software driver, please click the mouse icon on the task
bar and select “Mouse”.

2. Click “Settings” when the Mouse Properties

appears up and click “Security Options”.

3. Choose a picture from your images to display

when the computer is locked. Also set your

password for unlock computer. Then, press

“OK”, and the security setting will be finished.

2