KYE SYSTEMS GMZH9, GMZHA Users manual

FCC ID:FSUGMZH9

Hardware Installation

1. You can connect the receiver to a USB port of a PC or Notebook.

2. If you want to connect the receiver to a PC or
recharge the batteries, please use the USB bat
tery charger Y cable. (Please do not connect

the receiver directly to a PC that is placed
under a table, or the RF performance will de­crease dramatically.)

3. Install two AA rechargeable batteries in the
mouse. (Use only rechargeable batteries. Us­ing any other type of battery could cause seri­ous damage to your mouse or mainboard). Do
not charge batteries unless there are other
batteries in the mouse. Otherwise, you cannot use the mouse if you are
charging the batteries.

-

ENGLISH

4. Turn on your computer.

5. After you open Windows, press the button on the receiver first, then press the

button under the mouse for channel setting.

1