KYE SYSTEMS GMZGQ Users manual

Hardware Installation

Wireless Mouse

Model : GM-03018U/T, GM-03018U/R

1.
You can connect the receiver to a USB port of a PC

2.
Install two AAA batteries in the mouse.

3.
Turn on your computer.

4.
After you open Windows, please press the button on the receiver first and then press the button under the
mouse for channel setting.
Important: Remember do not put the batteries in the wrong direction, use the same types of batteries. Also,
keep all drinks away! If any spill occurs on the receiver, unplug the USB connector first and clean the
receiver immediately. Please remove the batteries if you do not use this device for at least two weeks.
Warning: (Troubleshooting)

1.
Please do not use Wireless Mini Navigator on a desk which is made of glass, mirror, iron, or black velvet.
Also, a flat surface is necessary or the Optical Sensor will error easily. When you use Wireless Mini
Navigator on a desk that is made of metal, try using a pad and reduce the receiving distance.

2.
Before the first installation is completed (channel setting ready), the mouse will not work in DOS.

3.
The Wireless Mini Navigator channel provides 256 ID-codes, and it automatically selects the ID # for your
mouse. You can only set up one Wireless Mini Navigator at a time. But if you have additional Wireless
Mini Navigator sets in an area of 10 square meters, more interference will occur between the receiver and
your mouse.

4.
If you feel the mouse does not move smooth as usual, then the batteries have lost their charge, so please
replace them. Also, the wireless icon will be blinking “red” when there is a battery-low situation. The LED
on the receiver shows the battery-recharging status (from shining to LED completely “on” for battery full).
You should set up the channel every time you replace the batteries.

5.
The Wireless Mini Navigator with radio frequency gives you free movement and an enjoyable experience.
For optimal performance, place the receiver at least 8 inches (about 20 cm) away from the mouse and other
electrical devices, such as the computer, monitor, and etc.
Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the Setup disk (or CD) into the disk drive.

3. Follow the instructions on the screen to finish the software installation.
Factory Setting/ faceplates changng

Button Assignments
The Button Assignment feature lets you work in a more efficient way because you can assign the most
frequently used commands in Windows to the mouse buttons.
Magic-Roller
Press the “Magic-Roller” to surf the Internet and Windows documents
Left Button
Provides traditional mouse functions such as click, double click and drag.

Right Button
You can assign this button frequently used keyboard and mouse functions in addition to features like
EasyJump, Auto-Panning, Zoom, etc.
Roller Button
You can assign this button frequently used keyboard and mouse functions in addition to features like
EasyJump, Auto-Panning, Zoom, etc.
Side Buttons
You can assign certain functions to the upper or lower side button with the roller.
MouseMate Software Features
Browsing Speed
You can adjust the browsing speed when you surf the Internet or Windows documents.
Browsing
Direction
Move the “Magic-Roller” forward and the screen will browse to the top of the document. Move it in
reverse and the document will go in the opposite direction
Button Find
Automatically positions the cursor on the default button, usually the OK button, when the dialog box
appears on your screen.
Trails
This option makes it easier to find the cursor when using an LCD monitor. This option cannot be used if
your monitor does not support it.
Loop
When you move the cursor to the top (or bottom) of the screen, it will automatically move the cursor to the
bottom (or top) of the screen.
Mouse Speed
This function lets you adjust the speed at which the pointer moves across the screen.
Double Click
Speed
Use this function to set the double click speed of the mouse.
Swap Left/Right
Select this option if you want to have the mouse operate with the right mouse button as the primary button.