KYE SYSTEMS GKZH8 User Manual

ENGLISH

Hardware Installation

1. Install two AA batteries in the mouse and two AA batteries in the
keyboard.

2. Plug in the USB receiver to a USB port of your PC.

3. Turn on your PC.

Software Installation

You can download the software from www.geniusnet.com. Go to Service
& Support and select “Drivers”. In Product Line, select “Keyboard &
Mouse combination”, then go to “Select Model” and select “TwinTouch
600”. Then select the OS you are using. Click on the file name to start the
download. Once you have downloaded the driver to your PC, click on the
file name to start the software installation. Just follow the instructions
shown on the screen to complete the installation.

Important Notice

1. Default hotkeys operate immediately when using Windows XP or
above.

2. When the mouse is in sleep mode (power saving mode), press any
button on the mouse to wake it up.

ID Channel Setting

The channel buttons are factory preset. The green LED, the data
transmissions indicator on the receiver will be lit when the keyboard or
mouse is in normal operation. If the keyboard / mouse do not work then
you have to reset the ID channel setting. Please press the connect button
on the receiver first and press the connect buttons under the mouse and

1

ENGLISH

keyboard within 20 seconds.

Keyboard hot key definition

Open browser in Netscape or IE.

Open mail folder.

Remove the sound.

Open the Windows calculator program.

Notes on Battery Usage

When you use the battery, carefully read and strictly observe the Safety
Instructions and the notes described below:

 Different battery types and surrounding temperatures may affect the

battery performance.

 Avoid using batteries in extremely cold environments as low

temperatures can shorten the battery life and reduce wireless device
performance.

 If you are using a new rechargeable battery or rechargeable battery that

has not been used for an extended period of time (batteries that pass
the expiry date are exceptions) it might affect the period of time you
can use this device. Therefore, to maximize their performance and
lifetime, we recommend that you fully charge the batteries and
discharge them for at least one complete cycle before use.

 The battery may feel warm when using the wireless device for an

extended period of time or using the flash continuously. This is normal
and not a malfunction.

 The wireless device may feel warm when being used continuously or

for an extended period of time. This is normal and not a malfunction.

 If you will not be using the batteries for an extended period of time,

remove them from the wireless device to prevent leakage or corrosion.

 Always keep the terminals in a clean state.
 Never use manganese batteries.
 Risk of explosion if battery is replaced by an incorrect type.
 Dispose of used batteries according to the instructions.

2