KYE SYSTEMS GKZH3 Users manual

ENGLISH

Hardware Installation

1. Install two AA batteries in the mouse and two AA batteries in the
keyboard.

2. Plug in your USB receiver to a USB HUB or the front panel USB
port of your PC.

3. Turn on your PC.

Warning: To prevent interference occur, DO NOT plug the
USB receiver behind the USB port.

Software Installation

1. Place your CD driver in your PC drive for software installation

2. Follow the instruction on the screen to finish the software
installation

Replace Batteries

When mouse or keyboard does not work properly, then the batteries
have lost their charge, so please replace them.
(Warning: please do not mix or use different types of batteries at the
same time)

1

ENGLISH

ID Channel Setting

The channel buttons are factory preset. The green LED, the data
transmissions indicator on the receiver will be lit when the keyboard or
mouse is in normal operation. If the keyboard / mouse do not work then
you have to reset the ID channel setting. Please press the connect
button on the receiver first and press the connect buttons under the
mouse and keyboard within 20 seconds.

Warning (Trouble shooting)

This device complies with Part 15 of the FCC rules, operation is subject
to the following two conditions.

（1）This device may not cause harmful interference and,
（2）This device must accept any interference received,

including interference that may cause undesired operation .
NOTE:
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICA TIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER＇S AUTHORITY TO OPERATE THE
EQUIPMENT

1. The wireless desktop set provides 256 ID codes, and it selects

the ID # for your wireless devices. You can only set up one
wireless desktop at a time. When you have another 27Mhz
wireless desktop set within 10 square meters, there may be

2