KYE SYSTEMS GKZH2, GMZHV Users manual

English

Introduction

LuxeMate R910 is a Bluetooth product designed to create a total
solution for a Bluetooth environment. It supports the boot mode
function that allows you to activate the keyboard and mous e function
before the Bluetooth driver has been installed.

Hardware Installation

1. Connect the Bluetooth receiver to a USB port of your PC or

Notebook.

2. Insert two AA batteries into the keyboard and make sure the

polarity is correct.

3. Push the button to open the upper cover and insert two AA

batteries in the mouse.

-1-

English

How to start when the Bluetooth driver has not been
installed

1. Press the connect button underneath the keyboard and observ e the

flashing LED light.

2. Press the ID switch button on the receiver for four seconds and

observe the flashing light.

3. To confirm the connection status, the LED light on the keyboard

will now turn off.

4. Repeat the above steps for mouse connection.

Software Installation (when you use Genius Bluetooth
dongle receiver)
For Windows:

1. Make sure the Bluetooth receiver is connected to the computer.

2. Put the BTW driver into the CD/DVD-Rom drive.

3. Select “No, not this time”, then “click to install＂.

4. Follow the instructions on the screen and press “Next” and “I agree” to finish the

software installation.

-2-

English

5. When you finish, you will find a “My Bluetooth Place” icon on the desktop or in

the program folder.

-3-