KYE SYSTEMS GKZH1 Users manual

ENGLISH

Hardware Installation

1. Install two AA batteries each into the mouse and keyboard.

2. Plug in your USB receiver to a USB port of your PC.

3. Turn on your PC.

Software Installation

1. Place your CD driver in your PC drive for software installation

2. Follow the instruction on the screen to finish the software
installation

Replace Batteries

When mouse or keyboard does not work properly, then the batteries
have lost their charge, so please replace them.
(Warning: please do not mix or use different types of batteries at the
same time)

1

ENGLISH

ID Channel Setting

The channel ID is factory preset. The green LED (data transmission
indicator) will be lit constantly when the wireless device is in normal
operation. In case your wireless devices do not work, please reset the
ID channel by:

1. Press the connect button on the receiver and the LED will be

blinking for connection.

2. Press the connect button of the wireless device once within 20

seconds and observe if the LED light on the receiver has gone off.
If yes, it means the wireless device is ready for use.

Security Function Setting:

1. After you install software driver, please click the mouse icon on the

task bar and select “Mouse”.

2. Click “Settings” when the Mouse Properties appears up and click

“Security Options”.

3. Choose a picture from your images to display when the computer

2

ENGLISH

is locked. Also set your password for unlock computer. Then, press
“OK”, and the security setting will be finished.

4. If you want to start the security function, just press “

the picture you set pop up to hide the screen. For security, the
mouse and keyboard won’t work.

5. If you want to unlock this function, just

press
password.

“

Warning (Trouble shooting)

1. The wireless desktop set provides 256 ID codes, and it selects the

ID # for your wireless devices. You can only set up one wireless
desktop at a time. When you have another 27Mhz wireless desktop
set within 10 square meters, there may be interference between
the wireless devices.

”again, and install your

3

”, and