KYE SYSTEMS GKZGZ Users manual

ENGLISH

Hardware Installation

1. Install two AA batteries in the mouse and two AAA batteries in the
keyboard.

2. Plug in your USB receiver to a USB port of your PC.

3. Turn on your PC.

Software Installation

1. Place your CD driver in your PC drive for software installation

2. Follow the instruction on the screen to finish the software
installation

Replace Batteries

When mouse or keyboard does not work properly, then the batteries
have lost their charge, so please replace them.
(Warning: please do not mix or use different types of batteries at the
same time)

1

ENGLISH

ID Channel Setting

The channel buttons are factory preset. The green LED, the data
transmissions indicator on the receiver will be lit when the keyboard or
mouse is in normal operation. If the keyboard / mouse do not work then
you have to reset the ID channel setting. Please press the connect
button on the receiver first and press the connect buttons under the
mouse and keyboard within 20 seconds.

Warning (Trouble shooting)

1. The wireless desktop set provides 256 ID codes, and it selects
the ID # for your wireless devices. You can only set up one
wireless desktop at a time. When you have another 27Mhz
wireless desktop set within 10 square meters, there may be
interference between the wireless devices.

2. Although that the mouse has granted the eye safety certification,
it is strongly suggested that a direct eye contact with the laser
lens should be avoid.

3. To use MSN and Lock function, it requires software to be
installed.

4. To re-program for other media programs, software installation is
required.

2