KYE SYSTEMS GG000O User Manual

LED Display

Pairing Blue LED flashes quickly

Paired Blue LED flashes slowly

ENGLISH

AUX IN, BT

standby

Charging

Battery Low

Bluetooth Pairing

1.After you have connected your headphone or speaker cable to

the BT-100R, you can turn on the BT-100R by switching the

slide switch to “On” and the blue LED will flash slowly. When it

Blue LED flashes slowly

Red LED on, then turns off when fully

charged

Red LED flashes slowly (see Battery

recharging)

1

ENGLISH

starts to flash quickly, this means it is entering pairing mode.

2.When you activate your device's Bluetooth function, it will

begin to search for the device. You will find “Genius BT-100R”

on your device's Bluetooth list and then you can connect it.

3.When pairing is successful, the blue LED will flash slowly.

Note 1: Most devices do not require you to key in the pin code. If

a pin code is required, key in “0000”.

Battery recharging

If the lithium battery is low and requires charging, just attach the

USB cable to the receiver and your PC/notebook.

Bluetooth music receiver connects wired speakers/headphone

to Bluetooth music devices

2