KYE SYSTEMS GG0007 Users manual

FEDERAL COMMUNICATIONS COMMISSION

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiated radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.

Instruction Manual

Thank you for purchasing this product.
Before using this product, carefully read this manual to ensure proper and safe use of

®

this product. For details, refer to the PlayStation

2 console’s instruction manual.

This cordless analog controller can be used only with the PlayStation®2 computer
entertainment system.

Using the cordless analog controller

● You can switch between digital and analog modes.

®

— PlayStation

control buttons: left analog stick / right analog sticks; △,○,Χ,□ buttons;

2 format software can be operate in analog mode with the following

directional button; L1, L2, R1, R2 buttons. The ultra-sensitive analog buttons

®

from this cordless analog controller can be used with PlaySation

2 console.
When the controller is in analog mode, buttons and sticks may operate in analog
fashion depending on the features supported by the software title. Refer to the
software manual for details.

— The corresponding analog mode can be used in PlayStation®2 format software.

When in analog mode, you can enjoy the analog operation of the left analog stick
and right analog stick. This function is only available for software supporting
the corresponding analog mode.

● When in the analog mode, you can enjoy the vibration function and unique
gaming experience.

※ For details, refer to the software manual.

Description of Cordless Game Controller

n

SELECT button

L1 button / L2 button

Directional button

POWER button / LED
mode indicator

Right-analog stick / R3 button

*DC IN outlet

START button

□ button

R1 button / R2 button

△ button

○ button

X button

Left-analog stick / L3 butto

ANALOG mode button

* The R3 button and the L3 button function when the stick is pressed.

Receiver unit connector

*DC IN outlet

LED indicator /
ID button

* When the indicator turns red and LED flashes (low battery), connect the DC cable

from the receiver unit to the DC IN connector- of the cordless analog controller to
avoid the hassle of replacing the batteries during your game play.