KW-TRIO 13911, 13914, 13921 Operating Instructions Manual

WARNING
Sharp blade. Keep hands away. Do not operate without safety shield in place
Care and Maintenance
CAUTION: To avoid damaging the product, never immerse the product in water or other
liquids.
Do not use abrasive cleaners on the product. Dust with a soft cloth using extreme caution around the blade.
Plastic Paper Guillotine
Operating Instructions
3
BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Components description
Blade
Paper guide
FOR INDOOR USE ONLY
IMPORTANT SAFEGUARDS
Read all instructions before using.
This product is not intended for use by children. Keep product out of the reach of children and pets. This product is intended for use in trimming paper. Do not use the product for any other purpose. Keep loose items (e.g., hands, fingers, jewelry, clothing, neckties, etc.) away from the blade to avoid personal injury or damage to the product.
To avoid damage to the product Remove paper clips and staples from items before trimming paper. Never lubricate the cutting blade. Do not expose product to water or other liquids.
To avoid possible severe personal injury Never operate the trimmer without the safety shied in place Never carry the trimmer by the blade. Never carry the trimmer by the cutting handle. Always ensure the blade lock is secure when the product is not in use.
Blade lock
Performance
Specification
Base size Cutting length(mm) Cutting capacity sheets(80 gsm) Clamp Safety shield Blade lock Measuring scale Format Indication
(W x D) in mm
How to use
A4
305x350
335 10
press
ABS shield
V
MM/INCH
A6-A4
B4
360x425
385 10
press
ABS shield
V
MM/INCH
A6-B4
Safety Shield
A3
360x480
440
10
press
ABS shield
V
MM/INCH
A6-A3
Do not attempt to dislodge jammed debris with a pointed object, as personal injury or product damage may occur. Always operate the product on a flat, level, steady surface to avoid it overturning. Do not hang or wall-mount the product. This product is intended for indoor use only. Do not use outdoors.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
1 2
1.Hold the handle and release the blade lock carefully.
5 6
2.Raise up the handle to screw in safety shied firmly.
3. Adjust the paper guide to proper position.
5. For hundred times cutting, the handle is loose and easy to drop down once raising the handle upto the top.
6. Take out the plastic cap and use hexagon wrench to tighten the screw both side and return it as well.
4. Push down the safety shield to hold the paper firmly when cutting.
Loading...