KW-TRIO 13060, 13061 Operating Instructions Manual

Sharp blade.

Keep hands away.

FOR INDOOR USE ONLY

IMPORTANT SAFEGUARDS

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

1 2

BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND
FOLLOW THESE INSTRUCTIONS.

Save these instructions for future reference.

Do not attempt to dislodge jammed debris with a pointed object, as personal
injury or product damage may occur.
Always operate the product on a flat, level, steady surface to avoid it overturning.
Do not hang or wall-mount the product.
This product is intended for indoor use only. Do not use outdoors.

Read all instructions before using.

This product is not intended for use by children. Keep product out of the reach of
children and pets.
This product is intended for use in trimming paper. Do not use the product for any
other purpose.
Keep loose items (e.g., hands, fingers, jewelry, clothing, neckties, etc.) away
from the blade to avoid personal injury or damage to the product.

To avoid damage to the product
Remove paper clips and staples from items before trimming paper.
Never lubricate the cutting blade.
Do not expose product to water or other liquids.

To avoid possible severe personal injury
Never operate the trimmer without the blade guard in place
Never carry the trimmer by the blade.
Never carry the trimmer by the cutting handle.
Always ensure the blade lock is secure when the product is not in use.

Components description

How to use it

Rotary blade head

Paper guide

Measuring scale

Clamp bar

1. Put the stack of paper under the
clamp bar and adjust the paper
guide to the proper position.
Can be removed for larger
applications.

2. Press and slide rotary blade
head to cut the stack of paper.

3. Push in and rotate the handle to
cut 20 to 30 sheets of copy paper
easily.

Warning: Slide the rotary blade
head to the far left or right to
place in locked position in
order to protect the internal
mechanism of rotary blade
head.

Cutting Length (mm)

Cutting Height (mm)

Format Index

Table Size (WxD)(mm)

Dimensions (WxDxH)(mm)

390

3.0

A6-A4

310x446

352x632x172

500

3.0

A6-A3

312x556

352x740x172

Model/Specifications 13060 13061

Operating Instructions

3

Care and Maintenance

CAUTION: To avoid damaging the product, never immerse the product in water or other

liquids.

Do not use abrasive cleaners on the product. Dust with a soft cloth using extreme
caution around the blade.

ROTARY TRIMMERS

20100706

1 42

Loosen the two screws from
any side of plastic panel
which holds the aluminum
rail.

Carefully remove the old
rotary blade head from the
aluminum bar.

Carefully slide the new rotary blade
head onto the aluminum bar and make
sure that the blade goes along with the
rail properly.

Fasten the two screws to hold the
aluminum rail tightly.

3

How to replace rotary blade head

Installation of hand wheel

（make sure that the
blade goes along with
the rail properly）

1. Take out the handle, spring and screw driver provided in the box.

2. Put the spring on the axle of rotary blade head in advance and

put the handle on the axle to hold the spring. And then fasten the

screw tightly. Please refer to the photo below: