KW-TRIO 13919, 13018, 13020, 13021, 13022 Operating Instructions Manual

Replacement cutter

Use the provided allen
wrench to remove the
screws.

Carefully remove the
cutter set.

Carefully slide the new
cutter set onto the bar.

Be sure to set the
inside washer well.

Use the allen wrench to tighten
the bar in place.

Care and Maintenance

CAUTIONS:

1. In order to avoid damaging the product, never immerse the product in water or other
liquids.

2. Do not use abrasive cleaners on the product.

3. Dust the blade with a soft cloth, using extreme caution when cleaning near the blade.

2011-1221-03

ROTARY TRIMMERS

The operating instructions

3

BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND
FOLLOW THESE INSTRUCTIONS.

Save these instructions for future reference.

FOR INDOOR USE ONLY

Components Description

Rotary Blade Head

Clamp Bar

IMPORTANT SAFEGUARDS

Read all the instructions before using the product.

This product is not intended for use by children. Keep product out of the reach of
children and pets.

This product is intended for trimming the paper. Do not use the product for any
other purposes.

Keep all loose items (e.g. jewelry, clothing, neckties, etc.) away from the blade

to avoid injury or damage to the product.

To avoid damaging the product

Remove the paper clips and staples from items before trimming the
paper.

Never lubricate the cutting blade.
Do not expose the product to water or other liquids.

To avoid possible severe injury
Never operate the trimmer without the blade guard in place.
Never carry the trimmer by the blade.
Never carry the trimmer by the rotary blade handle.

Do not attempt to dislodge jammed debris by using a pointed object, as injury or
product damage may occur.

Always operate the product on a flat, level, steady surface to avoid it overturning.
Do not hang the product on the wall.
This product is intended for indoor use only. Do not use or leave this product

outdoors.

Measuring Scale

Paper Guide

Sharp blade.

Keep hands away.

How to use

1. Place the paper guid as
the picture shown.

2. Press and lock the paper
guide.

3. To avoid breaking the paper
guide, do not lift it vertically
from the end.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

1 2

1. Put the paper under the clamp
bar.

2. Adjust the paper guide to
a proper position

3. Press and slide the rotary blade
head forword or backword to
cut through the paper.