Page 1
PC to TV Converter
User Manual
V1.1
Page 2
1. Introduction
The KWorld PC to TV converter provides automatic conversion of PC
desktop images to high quality video images for standard television
viewing.
Support Mode and Resolution
Resolution
IPC Compatible
VGA mode
Vertical frequency (Hz)
Apple MAC
640x480 60,70,72,75,85,100,120 60,66,72,75,85,100,120
800x600
1024x768
1152x864
1280x960
1280x1024
1600x1200
56,60,70 ,72,75,85,100
60,70,72, 75
60,70,72, 75
60
60
60
56,60,72, 75,85,100
60,70,75
60,70
x x
x x
x x
Product Features
a.
Automatically saves your adjustment settings.
b.
Pure hardware design- just Plug and Display, no software drivers or setup required.
c.
Supports resolution standards up to 1600 x 1200.
Apple iMac,
iMac DV
117
95
x
x
d.
Supports CVBS, S-VIDEO or RGB & Y.Cb.Cr video outputs with a simple switch
change.
e.
Programmable 2D scaling (without black frame on TV).
f.
Powered from a USB port - no power adaptor required.
g.
Simultaneous display on both TV and VGA monitors.
h.
Simultaneous RGB and CVBS output signal available on RGB connector.
i.
24 bit, true color digitizer.
j.
Panel Buttons: Power, Fine Tune, PAL/NTSC, Zoom, Menu and Position control
function.
k.
Y.Cb.Cr output supports all interlace formats including YUV,Y.Cb.Cr and Y.Pb.Pr.
l.
PAL/NTSC button functions: NTSC, NTSC-EIAJ, PAL-M, PAL-N, PAL, PALCOMBINATION-N.
m.
MENU button functions: Freeze, Horizontal SIZE (H-SIZE), Vertical SIZE (V-SIZE),
Brightness, Contrast, Hue, Saturation, Flicker, OSD color & Reset.
LED power indicator.
n.
Page 3
o.
Independent Horizontal Size and Vertical Size adjustment (programmable 2D
scaling).
p.
64 stages of output Brightness, output Contrast, output Hue, and output Saturation
adjustment.
q.
16 stages of FINE TUNING (Sharpness), and Flicker adjustment.
r.
Remote Control functions: POWER, VIDEO STANDARD, Position control, RESET,
MENU, FREEZE, and ZOOM adjustment.
s.
On Screen Display (OSD) operation status.
System Requirements
a.
IBM PC Compatible or notebook and Apple MAC.
(*MAC VGA connector is not include in this package)
b.
Supports NTSC or PAL video standard TV or VCR.
c.
Provides composite video output, S-Video output, and Y.Cb.Cr terminal output.
Page 4
2. Package Contents
a. Remote control.
b. User’s Manual.
c. Y Cable.
d. USB power cable.
e. Video Cable.
f. S-Video Cable.
g. Lithium battery *1 for remote control.
h. Kworld PC-TV Adapter Box.
i. Y.Cb.Cr Cable.
Y Cable Video Cable Y.Cb.Cr Cable
S-Video Cable USB power line Remote Control
PC-TV Box
Page 5
3. Hardware Connection
Connecting to a desktop PC
Page 6
HDTV Connection
Page 7
Connecting to a laptop:
1. Connect one of the blue connector of the Y-cable to the VGA port of laptop (It will
have the word “PC” on the blue connector).Then connect usb power cable into laptop
usb port.
2. Plug the black end (It will have “SCAN CNVTR” word) of the Y-cable to the
converter.
3. Plug the USB power cable (the gray one) into DC IN (for the USB power cable)
and plug the AV cable (the yellow one) to the Video Out port. Then connect another
end of the AV cable to a TV.
Page 8
PS: Please connect with other cables if you want other signal output
(S-Video,RGB,YCbCr).
4. Please switch the correct YCbCr/RGB/CVBS output on PCTV 1600.
5. Press “F4” and “Fn” to switch signal. Note: different laptop models have different
F# key to switch signal. Please consult with your laptop manual or manufacturer.
Page 9
4. Function
4.1 Input/Output Connections
a. SCAN CNVTR: VGA signal input/output. Connect to the Y cable.
b. RGB OUT: Output RGB signal.
c. S-VIDEO OUT: Output S-VIDEO signal connects to TV or VCR.
d. VIDEO OUT: Output VIDEO signal, connects to TV or VCR.
e. DC IN: Connect USB power cable, obtains power from USB port on PC
f. Y.Cb.Cr OUT: Output Y.Cb.Cr signal, connects to TV or VCR.
Page 10
4.2 Buttons and Switches
POWER: Power Switch.
NTSC/PAL: NTSC/PAL button switches between different TV
Standards.
MENU: Displays the OSD menu on screen. Main menu controls the
following functions: H-SIZE, V-SIZE, FREEZE, BRIGHTNESS, CONTRAST,
HUE, SATURATION, FLICKER, OSD BACKGROUND, RESET.
ZOOM: Switches on-screen video between 2x ZOOM and normal.
RESET: Resets all functions to factory standard settings.
Y.Cb.Cr/RGR/CVBS: Switches between different output modes.
CVBS: Switches to CVBS for Composite Video and S-Video output mode.
RGB: Switches to RGB for RGB output mode.
Y.Cb.Cr : Switches to Y.Cb.Cr for Component Video mode.
Page 11
4.3 Remote Control
a. POWER: Power switch.
b. RESET: Resets all functions to factory
standard settings.
c. N/P: NTSC/PAL button switches between
different TV Standards.
d. ZOOM: Switches on-screen video from
normal to 2x zoom.
e. M: Displays the OSD menu on screen.
Main menu controls: H-SIZE, V-SIZE,
FREEZE, BRIGHTNESS, CONTRAST,
HUE, SATURATION, FLICKER,
OSD BACKGROUND, RESET.
f. FINE TUNE: Reduces on-screen video
shaking.
g. FREEZE: Freezes on-screen TV image.
h. : Tilts screen UP.
i. : Tilts screen DOWN.
j. : Pans screen to the LEFT.
k. : Pans screen to the RIGHT.
Page 12
4.4 OSD MENU
1. H-SIZE: Adjusts the horizontal size of on-screen video.
2. V-HIZE: Adjust the vertical size of on-screen video.
3. FREEZE: Freezes current TV screen.
4. BRIGHTNESS: Adjusts the video brightness 64 degrees. (Default
value is 32).
5. CONTRAST: Adjusts the video contrast 64 degrees. (Default
value is 32).
6. HUE: Adjusts the video HUE 64 degrees. (Default value is 32).
7. SATURATION: Adjust the video saturation 64 degrees. (Default
value is 32).
8. FLICKER: The Flicker filter controls the width and height of the
edge enhancement.
9. OSD BACKGROUND: Switches the OSD background color.
10. RESET: Resets all functions to factory standard settings.
Loading...