RKD-DS-17-HDXD www.kvmswitchtech.com
751
RKD-DS-17-HDXD
1U Dual Slide LCD Console Drawer
Options :
- SDI
- AV / HDMI / Audio - DC power
User Manual 17” Ultra High Resolution LCD 1920 x 1200
RKD-DS-17-HDXD www.kvmswitchtech.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not liable
for any injury or loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned
environment with temperatures not exceeding 40° Celsius (104° Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it
and the power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and
current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than
the one listed on the equipment’s ratings label.
Observe all precautions and warnings attached to the equipment.
If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the
power supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the
equipment and invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Re-position or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
RKD-DS-17-HDXD www.kvmswitchtech.com
Contents
< Part. 1 > RKD-DS-17-HDXD
1.1 Package Content P.1
1.2 Structure Diagram & Dimension P.1 - 2
1.3 Installation P.3 - 5
1.4 Connection P.6 - 7
< Part. 2 > Specifications / OSD
2.1 Product Specifications P.8 - 9
2.2 Keyboard / Mouse Specifications P.10 - 12
2.3 On-screen Display Operation ( OSD ) P.13 - 14
< Part. 3 > Options
3.1 3G / HD / SD-SDI Broadcast-grade input P.15
3.2 HDMI, S-Video + BNC & Audio P.16
3.3 48V, 24V or 12VDC power P.17
RKD-DS-17-HDXD www.kvmswitchtech.com
Contents
< Part. 4 > KVM Integration
Matrix
Local
Remote 8-port
16-port
32-port
DB-15 KVM
1 1 1
-MIP813
-MIP1613
1 1 2
-MIP824
-MIP1624
1 1 0
-M802
-M1602
1 2 0
-M803
-M1603
1 3 0
-M804
-M1604
-
Combo
Local
Remote 8-port
16-port
32-port
DB-15 KVM
1 0 1
-IP802
-IP1602
1 1 0
-802
-1602
1 0 0
-S801
-S1601
-
DVI-D
Local
Remote 12-port -
KVM
1 0 0
-1201D - -
PS/2
Local
Remote 8-port -
DB-15 KVM
1 0 0
-801 - -
RKD-DS-17-HDXD www.kvmswitchtech.com
Before Installation
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
Make sure the place has good ventilation, is out of direct sunlight, away from sources of
excessive dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
Caution :
To avoid the risk of electric shock, make sure your hands are dry before unplugging your
monitor from or plugging your monitor into an electrical outlet.
When you clean your monitor, do not press down on the LCD screen. Pressing down on the
screen can scratch or damage your display. Pressure damage is not covered under warranty.
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not
made to clean monitors and monitor screens can scratch the LCD display or strip off the finish.
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids
directly onto the screen or case can cause damage which is not covered under warranty.
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood
based paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
1 Disconnect the power cord.
2 Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
1 Disconnect the power cord.
2 Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to
your microfiber cloth first, not directly on the parts you are cleaning.
3 Gently wipe the surface. Use as little pressure as possible.
4 Wait until your monitor is completely dry before plugging it in and powering it up.
< Part 1 >
< 1.1 > Package Content
RKD-DS-17-HDXD P.1 www.kvmswitchtech.com
RKD-DS-17-HDXD unit X 1
- KVM-KVM-CX-6 6ft DVI-D console cable X 1
( Alternative : KVM-CB-6 6ft VGA console cable )
- Power cord X 1
- M6 screw, cage nut & cup washer X 8
The above package content is only for the single console models.
It varies with options such as KVM, SDI, HDMI, AV, Audio & DC power.
< 1.2 > Structure Diagram
RKD-DS-17-HDXD P.2 www.kvmswitchtech.com
< 1.2 > Dimension RKD-DS-17-HDXD
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
RKD-DS-17-HDXD
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73"
595 x 860 x 140 mm
23.4 x 33.9 x 5.5”
12 kg
26.4 lb
18 kg
39.6 lb
The weight is only for the single console models. It varies with accessories & options
such as KVM, SDI, HDMI, AV, audio & DC power.
RKD-DS-17-HDXD P.3 www.kvmswitchtech.com
< 1.3 > Installation - How to install
Installation Slides
< 1.3 > Installation - How to Use the Dual Slides RKD-DS-17-HDXD
Press the handle button and gently slide
out the drawer.
Flip up the LCD to a suitable angle.
Operate the LCD console drawer.
RKD-DS-17-HDXD P.4 www.kvmswitchtech.com
< 1.3 > Installation - How to Use the Dual Slides
Flip down the front panel.
Press the handle button and gently
push back the drawer into the rack.
Return the LCD console drawer to
park position.
RKD-DS-17-HDXD P.5 www.kvmswitchtech.com
via KVM-CX-6
USB Server
< 1.4 > Connection to
via KVM-CX-6
external KVM
< 1.4 > Connection to
LCD Console Drawer
KVM
DVI-D
Power
USB
USB server
KVM-CX-6
DVI-D
DVI-D
DVI-D KVM
Power
LCD Console Drawer
KVM-CX-6
DVI-D
DVI-D USB
DVI console KVM
RKD-DS-17-HDXD
RKD-DS-17-HDXD P.6 www.kvmswitchtech.com
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
via KVM-CB-6
USB Server
< 1.4 > Connection to
via KVM-CB-6
external KVM
< 1.4 > Connection to
KVM
Power
USB console KVM
LCD Console Drawer
KVM
Power
KVM-CB-6
VGA console
USB
USB server
VG A
LCD Console Drawer
KVM-CB-6
VGA console
USB VGA
RKD-DS-17-HDXD P.7 www.kvmswitchtech.com
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning off the power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
RKD-DS-17-HDXD P.8 www.kvmswitchtech.com
< Part 2 >
< 2.1 > Product Specifications RKD-DS-17-HDXD
LCD Panel Size ( diagonal )
17.1-inch Widescreen TFT color LCD
Panel Display pixel ( dots x lines )
1920 x 1200
Brightness ( typ. )
210
Contrast Ratio ( typ. )
600:1
Color
16.7 M, 8-bit
Viewing Angle ( L/R/U/D )
65/65/55/55
Response Time ( ms )
30
Dot pitch ( mm )
0.191
Display Area ( mm )
367.20H x 229.50V
Surface treatment
Anti-glare, Hard-coating
Surface hardness
3H
Backlight Type
LED
MTBF ( hrs )
20,000
Video Digital
Connectivity
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS single link
Analog
VGA
Analog 0.7Vp-p
Composite ( BNC )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio Audio Input
Connectivity
Connector 3.5mm stereo jack
Impedance / Power level 30k.2 / 750mV
Audio Output
Connector
3.5mm stereo jack
Resistance / Power level
30k.2 / 2.8V
Speaker Output
Power
2 x 2W
*When the audio output is connected, speaker output is OFF
Power Power Supply
Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
34W or less
Power saving mode
4W or less
Power button OFF
1W or less
Regulatory
Safety
Environmental
FCC & CE certified
RoHS2 & REACH compliant
RKD-DS-17-HDXD P.9 www.kvmswitchtech.com
Environmental Operating
Conditions
Temperature
0 to 50°C degree
Humidity
20~90%, non-condensing
Storage
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical
Specification
Product ( W x D x H )
441.6 x 650 x 44 mm
17.4 x 25.6 x 1.73 inch
Packing ( W x D x H )
Net Weight
595 x 860 x 140 mm
23.4 x 33.9 x 5.5 inch
12 kgs / 26.4 lbs
Gross Weight
18 kgs / 39.6 lbs
Applicable
Format
DVI-D / VGA Input
PC Signal
1920 x 1200 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60 /
75Hz 1280 x 960 x
60Hz 1280 x 768 x 60 /
75Hz 1152 x 864 x
75Hz 1024 x 768 x 60 /
70 / 75Hz 848 x 480 x
60Hz 800 x 600 x 60 /
72 / 75Hz 720 x 400 x
70Hz 640 x 480 x 60 /
72 / 75Hz 640 x 400 x
70Hz 640 x 350 x 70Hz
< 2.2 > Keyboard / Mouse Specifications RKD-DS-17-HDXD
RKD-DS-17-HDXD P.10 www.kvmswitchtech.com
Ge G keyboard integrated with touchpad
Key force
55 ± 5g
Travelling distance
3 ± 0.3mm
Switch life
> 10 million life cycle time
Software support
MS Windows 7 / 2008 / 2003
Linux / Mac
/ 2000 / XP / ME / 98 / DOC
Supporting layouts
RKD-DS-17-HDXD P.11 www.kvmswitchtech.com
Supporting layouts
America
United States
How to Use "MAC" Keyboard
Keyboard Features
F7
Rewind
Eject disc
Command
F3
Mission control
* Only works with OS X Lion
default Keyboard Shortcuts.
F1
Decrease display brightness
F4
Dashboard
F8
Play / Pause
F2
Increase display brightness
F10
Mute sound
F11
Decrease volume
F9
Fast-forward
F12
Increase volume
< 2.2 > MAC Keyboard / Mouse Options
Me MAC keyboard integrated with touchpad
< 2.2 > SUN Keyboard / Mouse Options RKD-DS-17-HDXD
S keyboard integrated with touchpad / trackball
RKD-DS-17-HDXD P.12 www.kvmswitchtech.com
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
Se S keyboard integrated with touchpad
Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
104 key notepad keyboard with full numerical pad and SUN function
USB interface
US layout only
How to Use "S" Keyboard
Num LED in Off mode Num LED in Green mode
Key pad behaves as a SUN Solar Key pad behaves as a normal key
system administration command mode pad mode
Audio / Display Keys * Please ask your supplier for full details
RKD-DS-17-HDXD P.13 www.kvmswitchtech.com
< 2.3 > On-screen Display Operation ( OSD )
1 Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness : Adjust background black level of the screen image
Contrast : Adjust the difference between the image background
(black level) and the foreground (white level)
Hue: Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Picture size : Adjust the image size
Color temp : Standard / Cool / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness : Adjust the image from weak to sharp
RKD-DS-17-HDXD P.14 www.kvmswitchtech.com
< 2.3 > On-screen Display Operation ( OSD )
2 PC
Auto adjust : Automatically adjust sizes, centers and Þne tunes the
video signal to eliminate waviness and distortion.
Clock : Adjust the clock value
Phase : Adjust the phase value
H. Position : Align the screen image left or right
V. Position : Align the screen image up or down
RKD-DS17-HDXD
3 Au dio
Audio mode : Movie / Voice / Normal / Music mode to choose
Volume : Adjust the volume of sound
Bass : Set the value of bass sound
Treble : Set the value of treble sound
Balance : Set the balance value of treble and bass sound
Analog TV audio : Set the value of analog TV audio sound
Mute : Turn off the surrounding sound
4 MISC
Language : Select the language in which the OSD menu is
displayed - English
Sleep timer : Set the off time
PIP mode : Adjust picture in picture setting
PIP position : Enter into PIP position
PIP source : Enter into the Sub source and sound source
System reset : Return the adjustment back to factory setting
Information : Select for Help
RKD-DS-17-HDXD P.15 www.kvmswitchtech.com
INPUT
3G-SDI IN
3G-SDI OUT
BNC x 1 / 0.8Vp-p ( 75 ohm )
BNC x 1 / Active through, equalized & relocked
KVMSwitchTech’s SDI input is an ideal solution for the
broadcast-grade video and high resolution CCTV market.
Designed for use with Full HD 1080p and ultra high resolution
1920 x 1200 LCD displays, KVMSwitchTech provides a SDI
input module without using additional space or power and it
comes standard with a 2-year warranty.
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
Standard Compliance
Video
Audio
SMPTE 425M / 274M / 296M /
125M ITU-R BT.656
SMPTE 299M / 272M-C
Compatible Video Format
3G-SDI
1080p
@60 / 50Hz, 4:2:2
1080p
@30 / 25 / 24Hz, 4:4:4
1080i
@60 / 50Hz, 4:4:4
720p
@60 / 50Hz, 4:4:4
HD-SDI
1080p
@30 / 25 / 24Hz, 4:2:2
1080i
@60 / 50Hz, 4:2:2
720p
@60 / 50Hz, 4:2:2
SD-SDI 480i
@60Hz, 4:2:2
ITU-R BT.656 576i
@50Hz, 4:2:2
Compatible Audio Format
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized
/ Asynchronized Video
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI
HD-SDI
SD-SDI
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
< 3.2 > Options : RKD-DS-17-HDXD
RKD-DS-17-HDXD P.16 www.kvmswitchtech.com
- HDMI ( HDMI 1.1, CEA-861-D )
- AV ( S-Video + Composite, BNC )
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
For dual slide 1U / 2U LCD console drawer, the user can only select one of the above four options.
< 3.3 > Options : DC Power
RKD-DS-17-HDXD P.17 www.kvmswitchtech.com
Model
12V
24V
48V
Input rating
Input voltage:
12-Volt
24-Volt
48-Volt
Input range:
9 — 18V
18 — 36V
36 — 75V
Input current
- No load
50 mA
50 mA
50 mA
- Full load
4950 mA
2450 mA
1220 mA
Output rating
Output voltage:
12-Volt
12-Volt
12-Volt
Output current:
4.16A
4.16A
4.16A
Efficiency
84%
85%
85%
DC power
***
Option excludes 1 x power cord and 1 x AC power adapter
RKD-DS-17-HDXD www.kvmswitchtech.com
The company reserves the right to modify product Specifications without prior notice and assumes no
responsibility for any error which may appear in this publication.
All brand names, logo and registered trademarks are properties of their respective owners.
Loading...