KVH Industries TracPhone Quick Start Manual

TracPhone® Fleet One Quick Start Guide

This guide provides basic operation information for the TracPhone Fleet One satellite
communications system. For complete installation, operation, setup, and diagnostics
information, refer to the User and Installation Manual. If you need any assistance, please
contact KVH Technical Support.

Technical Support

North/South America, Australasia: Europe, Middle East, Africa, Asia-Pacific:

Phone: [phone] Phone: [phone]
E-mail: [e-mail] E-mail: [e-mail]

How to Make a Voice Call

FROM the Fleet One Terminal

Direct:

Dial 00<Country Code><Phone No.># or off-hook key

Using the Phone Book:
Dial 00<Short Dial No.># or off-hook key

Redial:
Last called: Dial 0*# or off-hook key
Last answered: Dial 00*# or off-hook key

Local Onboard (call to another handset):
Dial <Local No.># or off-hook key

Example: 0301# (analog) or 0501# (IP handset or
smartphone connected via WLAN)

How to Access the Internet

TO the Fleet One Terminal

Direct:

Dial +<Fleet One Phone No.>

Example: [phone]

“+” = International call prefix; varies by country

MobileLink:

1. International: Dial [phone]
N. America: Dial 1-877-202-0367

2. Select a language when prompted

3. Dial <6-digit MobileLink Access Code>#

The access code is linked to the terminal’s phone number.

You can access the Internet using any device connected
to the terminal (such as a smartphone or laptop).

1. On a connected device, start your web browser and
enter http://ut.bgan or the IP address of the Fleet
One terminal; default is http://192.168.0.1. (Your
browser’s proxy server settings must be disabled.)

2. At the web interface dashboard, click Start Data
Connection. You should now have access to the
Internet. Click Refresh to update status.

3. When you are finished using the Internet, return to
the dashboard and click Stop Data Connection.

Using the web interface, you can set up the terminal to
automatically start a data connection at startup. See the
User and Installation Manual for details.

©2015 KVH Industries, Inc., All rights reserved. KVH and TracPhone are registered trademarks of KVH Industries, Inc. All other trademarks are the property of their respective companies.

The information in this document is subject to change without notice. No company shall be liable for errors contained herein. 54-1128 Rev. A

TracPhone® Fleet One Quick Start Guide

Power Light On/Off Switch

How to Use a Smartphone with Fleet One

To use a smartphone or other wireless device with the

Smartphone

WAP

Fleet One Terminal

LAN 1

* Set up the same user name and password in your phone
and the Fleet One web interface (go to SETTINGS > IP
Handsets). See the User and Installation Manual for details.

Fleet One system, you first need to connect a wireless
access point (WAP) to the terminal to establish a WLAN.
The Fleet One terminal does not have built-in Wi-Fi.

To make calls via the WLAN, an SIP client (or app) must
be installed on your smartphone with the following SIP
server details:

SIP Server Address and Port:
Default address: 192.168.0.1, Port: 5060

User Name:
Local No. in Fleet One (0501 to 0504)*

Password:
Default: Same as user name*

Codec Priority:
Highest priority codec type: G.711

Status Indicators

Power Light

State Indication

Off Powered off, or no power input

Green Powered on, normal operation

Green, Flashing Starting up

Orange, Flashing Shutting down

Web Interface Icon Bar

Icon Indication

Satellite signal strength

A new SMS message has arrived; click
the icon to see new messages

An event is active; click the icon to see
a list of active events

Tel: [phone] Fax: [phone]

KVH Industries A/S

EMEA Headquarters

Kokkedal, Denmark

E-mail: [e-mail]

www.kvh.com

KVH Industries, Inc.

World Headquarters

Tel: [phone] Fax: [phone]

Middletown, RI U.S.A.

E-mail: [e-mail]

KVH Industries Pte Ltd.

Asia-Pacific Headquarters

Singapore

Tel: [phone] Fax: [phone]

E-mail: [e-mail]