ESM12
Installation of the protective covering for driver
The ESM12 as true stage oor monitors come tted with extra –heavy duty grills for protection from
standing and jumping by performing musicians and are built and designed for a tough and heavy
duty operation.
Similarly, to help protect the HF diaphragm component from liquids and excessive dirt ingress, both
units come supplied with an optional use- specially formed barrier protection, which can be tted
over the HF Horn template by rst removing the Horn screws and placing the plate over the horn.
This consists of a metal square frame that holds tensioned acoustical open gauze, which does not
allow liquid to pass through, but rather to run downwards into the bottom edge of the enclosure,
thus protecting the HF component.
The ESM26 and ESM12 do not come tted with this frame from the factory as it does make some
slight dierence to HF delivery and performance, thus we leave the choice for the operator to decide
on its employment.
ESM12
1 - Removing the grill :
Remove the ESM12 grill, unscrew 10pcs
hexagon screws, size 2,5.
3 - Asembling the protective cover :
2 - Removing the horn screws :
Remove 8pcs hexagon screws, size 3.
4 - Asembling the grill:
Place the protective cover over the driver
horn. Use hexagon screws dismantled
from the horn. Tighten the screws.
Protective covering
Place the grill and tighten the screws.
KVV120097-00-03-0
Loading...