Kuzma STABI-XL4 User Manual

Fig.1
STABI XL 4 KIT- FOR CONVERTING STABI XL2 TURNTABLE Instruction manual 2010
1
KUZMA LTD
INSTRUCTION MANUAL FOR STABI XL 4 kit turntable
The Stabi XL 4 KIT: converts Stabi XL2 turntable into Stabi XL 4 version. The difference is the addition of two extra motor towers to make 4 motor towers in total with 4 belts. These give more stable drive to the platter and there is a new better power supply. All this add 20kg to the total weight of the turntable.
General Description: The kit is packed in two boxes. Some parts are very heavy so handle the box with care . No tools are required but a strong shelf or other support must be provided The electronic power supply generates controlled feed from a quartz to the four motors, in such a way that the vibration of the motors is minimised.
Stabi XL 4 turntable :Technical data:
Mass (total w/o PS) : 93kg Platter: 22 kg Base: 27kg Motor towers: 4x 7kg Tonearm tower: 14 kg Speeds (fine adjust): 33, 45 rpm Dimension: 450x 450 x 300 mm Power supply: 110V or 240 V , 50/60Hz (factory set)
Safety instructions:
The power supply is connected to the mains via the cable.Please keep the PS away from moisture and be careful not to damage the mains cable. The same precaution applies to cables feeding the motor towers.
2
Loading...
+ 4 hidden pages