Kuzma Stabi Reference Owners manual

S T A B I R E F E R E N C E

T U R N T A B L E

instruction manual

KAT d. o. o. Kuzma Audio Trade Hotemaže 17 a

4205 PREDDVOR

SLOVENIA tel. [phone] fax [phone]

CONTENTS

I. GENERAL DESCRITION 3

SPECIFICATIONS 4

ACCESSORIES 4

II. UNPACKING 5

III. ASSEMBLY 6

Testing for correct assembly 7

Mounting tonearm 7

IV. ADJUSTMENT 8

1. Positioning turntable and power supply 8

2. Levelling of turntable 8

3. Fine speed adjustment 8

V. USE OF CLAMP 9

VI. GENERAL MAINTAINANCE 10

VII. MINOR PROBLEMS 11

1. Immobile subchassis 11

2. Platter does not rotate 11

3. Slow start 11

VIII. TRANSPORT AND PACKING 12

_________________________________________________________________

STABI REFERENCE T U R N T A B L E 2 KUZMA

I. GENERAL DESCRITION

STABI REFERENCE TURNTABLE is a suspended subchassis turntable. The base
plate, subchassis and platter are of an acryclic and aluminium sandwich construction
which dampens all resonance of the turntable. The subchassis is isolated from the
environment by four springs which are damped with silicon oil in sealed reservoirs.
The suspension in easily adjusted via four knobs on the turntable top. The whole
turntable stands on three large spikes.

The bearing assembly is of an inverted type. The platter lies on a ruby ball and is
centred by a sliding ring. These both have their own oil bath.

Two motors drive the platter via a flat belt. The turntable has its own power supply
which enables motors to rotate with the minimum of vibration and constant torque. It
is quartz controlled, split phase with internal 0.4 % speed adjustment. The signal is
amplified by two 20W amplifier.

Each turntable is individually built and tested and made of the best available materials
to ensure it gives the highest possible standard of musical performance.

We wish you many happy and trouble free listening years.

_________________________________________________________________

STABI REFERENCE T U R N T A B L E 3 KUZMA

SPECIFICATIONS

mass 40 kgs
external dimensions 500x400x200 mm
weight of platter 8 kgs
resonance ob subchassis 2 Hz (damped)
speeds 33,45 RPM
mat textile&rubber
motor 2 pcs 24 poles
mains supply (non selectable) 110 V, 240 V, 50, 60 Hz

ACCESSORIES

The following are supplied with the turntable and will be found in the accessories box:

1. Clamp with washer (plate)

2. Alan key 4 mm for tonearm board

3. Small plastic bottle with oil for bearing

4. belt

5. subplatter

_________________________________________________________________

STABI REFERENCE T U R N T A B L E 4 KUZMA