Kuzma STABI R Instruction Manual

KUZMA STABI R TURNTABLE

(supplied without arm )

S/N..

Instruction manual

2018-09

1

KUZMA LTD

INSTRUCTION MANUAL FOR STABI R turntable

The Stabi R turntable is a very precisely engineered piece of equipment. However the
construction is robust and requires minimal maintenance for optimal performance.

Fig. 0.

CONTENTS: Page

General 3

Product registration and warranty extension 3
Technical data 4
Unpacking 5
Assembling 6-8
Power supply 9
Use and Adjustment 10
Maintenance 10
Accessories 11
Troubleshooting 11
Transportation 12

2

General

Stabi R is a very compact turntable made from a solid block of aluminium with an internal ( built
in) electronic power supply. Drive is provided through a DC motor and a proprietary, non flexible
drive belt. Stabi R also features a main platter with a very high mass ( 8 kg). The drive concept is
the same as on our flagship turntable model Stabi XL DC. A very smooth torque characteristic
enables the platter to reach its speed of 33 rpm accurately and approximately 2 seconds. A precise,
accurate and consistent speed of rotation is maintained even under the most demanding conditions
imposed by the complex dynamic peaks in music.

The platter is a sandwich design consisting of three layers ( aluminium – acrylic - aluminium)
which minimises vibration and maximises the damping effect of the platter itself and that of the
LP. The ruby ball minimises friction and noise within the thrust bearing and is supported on a
special low noise compound material.

On the right hand side of the main structure (chassis), there is a firmly attached, but removable
tonearm “wing” carrying the arm board. Both these elements of the Stabi R are also machined
from solid blocks of aluminium. This turntable has as number of options for use with multiple
tonearms and can be provided in various aesthetic finishes. There is an option for two tonearms
where a second tonearm wing can be added along the left hand side of the main chassis. The basic
turntable* is also available without any tonearm options, i.e. as a main chassis for installations in a
custom made turntable plinth of the owner’s choice.

The complete Stabi R turntable structure is supported on four fully adjustable metal feet.

Product registration and warranty extension

Kuzma products have a non transferable 2 year limited warranty on parts and labour, which may
vary in each country.
To obtain the 5 year* limited warranty from us, you need to register the product on our web site
within 30 days of purchase. We suggest registration of products in any case because this will also
help you to receive our technical support more easily and with resale of products.
Simply register on our web site, complete the forms and you will receive an extended five year
warranty card by email within a few days. * Not valid for ex demo products.

3

Technical data:

Mass 36 kg
Platter mass 8 kg
Platter material aluminium & acrylic
Bearing type inverted (ruby ball)
Shaft diameter 16 mm
Chassis / levelling aluminium / yes
Turntable levelling yes (4 adjustable feet)
Drive Single DC motor
Belt special
Internal power supply yes (electronic)
Speeds 33, 45, (fine speed adjustment)
Armboard yes
VTA adjustment no (optional)
No. of tonearms 1 (+ up to 3 optional)
Suspension no
Dimensions 480 x 380 x 150 mm (*320 x 380 x 150 mm)
Finish black or silver
Record Clamp optional
Platter Mat yes
Mains supply 115/230/50-60 Hz ( internal fuse T 500mA)
Dust Cover no
Accessories supplied bearing oil, Allen keys
Options: pre-cut armboards, clamp, RAL finishes, second tonearm
wing, arm holder, arm balcony, wooden frame...

Safety Precautions:

Electrical connection to the turntable from the mains comes via the cable. Please keep away from
moisture and be careful not to damage the mains cable. .

Basic Setup

Note: Some parts are heavy, so be careful when handling!
Note: Choose a suitable supporting table which can hold over 40 kg without warping.
Note: While some parts are packed in plastic bags for protection, these are not intended to be

strong enough to lift or carry the contents.

4