INSTALLATION INSTRUCTIONS
Model 091-32-029( )-XX, 2 Relay Board
The 091-32-029( )-XX Relay Board contains 2 relays mounted in a single assembly
along with indicating LED’s and suppression diodes across each relay coil. The as-
sembly is available for either 12 or 24 volt systems and for operation by supplying +12
volts to the relay or by grounding the relay. The table below outlines the part numbers,
voltages and wiring configuration.
Installation is simple and consists of mounting the base in a suitable location. The
common terminal is connected to either the vehicle Ground or to + voltage dependng
on the model. Inputs are supplied to the other two inputs. When the relays are ener-
gized the adjacent LED lights. The relays have 30 amp contacts which are accessible
through 1/4 inch quick disconnect terminals. Both normally open and normally closed
contacts are provided for complete circuit flexibility.
Part Number Voltage Common Connection Input to Operate
091-32-029N-12 + 12 Volts + 12 Volts Ground
091-32-029P-12 + 12 Volts Ground + 12 Volts
091-32-029N-24 + 24 Volts + 24 Volts Ground
091-32-029P-24 + 24 Volts Ground + 24 Volts
K1 K2
C
R
1
RELAY 1
R1
DS1
+ VOLTS
SINCE 1967, DESIGNERS OF INNOVATIVE PRODUCTS
KUSSMAUL ELECTRONICS COMPANY, INC.
RELAY LOAD CONTACTS, TYPICAL
CONNECT LOAD S AS REQUIRED
LOAD NOT TO EXCEED 30 AMPERES
C.N.O.N.
MOC
C.N.O.N.
C
MOC
R
2
RELAY 2
3
R
R2
23
1
2
1
H
H
C
C
T
T
I
I
W
W
S
S
C
DS2
“P” Assembly
K1 K2
C
R
1
RELAY 1
R1
DS1
RELAY LOAD CONTACTS , TYPIC AL
CONNECT LOAD S AS REQUIRED
LOAD NOT TO EXCEED 30 AMPERES
C.N.O.N.
MOC
C.N.O.N.
C
MOC
R
2
RELAY 2
3
R
R2
23
1
1
2
H
C
T
I
W
S
+ VOLTS
H
C
T
I
W
S
C
DS2
“N” Assembly
170 CHERRY AVENUE, WEST SAYVILLE, NEW YORK, 11796-1221 USA
Phone: Toll Free: Fax: E-Mail: , Web:
File: 091-32-029( )-XX.pmd
Date: March 23, 2007, MFG
631 567-0314, 800 346-0857, 631 567-5826, sales@kussmaul.com www.kussmaul.com
Loading...