Page 1
INSTRUCTION MANUAL
AUTO POWER
DC TO DC POWER CONVERTER
FILE: 091-136-24-12
DATE: 01-02-01
MODEL #091-136-24-12
INPUT: 24 VOLTS DC
OUTPUT: 12 VOLTS, 3 AMPS DC
OUTPUT RIPPLE: 10 mv. RMS, maximum
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO., INC.
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796
TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826
1
Page 2
INTRODUCTION
The Model 091-136-24-12 is a switching power converter designed to operate a 12 volt
device from a 24 volt battery. The output is filtered to provide an extremely low ripple so as
not to interfere with a radio or other sensitive electronic devices. The device is vented and
should be mounted in a dry location with adequate spacing to permit air circulation.
INSTALLATION
Install the input and output wires, #16 AWG minimum, as illustrated in the installation wiring
diagram.
INSTALLATION WIRING
2
Page 3
SPECIFICATION AND OUTLINE
INPUT: 26 +/- 4 volts D.C.
OUTPUT: 12.5 +/- .5 volts @ 3 amps. Maximum
OUTPUT RIPPLE: 10mv. RMS. maximum
WARRANTY
All product of Kussmaul Electronics Company Inc. are warranted to be free
of defects of material or workmanship. Liability is limited to repairing or
replacing at our factory, without charge, any material or defects which
become apparent in normal use within 3 years from the date the equipment
was shipped.
Kussmaul Electronics Company, Inc. shall have no liability for damages of
any kind to associated equipment arising from the installation and /or use of
the Kussmaul Electronics Company, Inc. products. The purchaser, by the
acceptance of the equipment, assumes all liability for any damages which
may result from its installation, use or misuse, by the purchaser, his or its
employees or others.
3
Loading...