INSTRUCTION MANUAL
EURO CHARGER
AUTOMATIC BATTERY CHARGER
MODEL #091-90-XX
NOTE :
This charger is designed for vehicles with
3 batteries and negative ground.
3 YEAR WARRANTY
KUSSMAUL ELECTRONICS CO., INC.
170 CHERRY AVE., WEST SAYVILLE, N.Y. 11796
TEL: in NY 631-567-0314 TOLL FREE: 800-346-0857 FAX: 631-567-5826
1
INTRODUCTION
The Euro Charger, Model 091-90-xx is a compact, completely automatic single channel
battery charger designed specifically for the fire service and emergency vehicles. Of rugged
construction, the charge is made to withstand the shock and vibration encountered in
vehicle mounted equipment. Utilizing components which meet international safety requireÂments makes this charger ideal for worldwide applications.
BATTERY CHARGER FEATURES
Completely automatic operation, charges battery on demand
Input voltage, switch selectable, 115 volt or 230 volts
Output voltage regulated, eliminates overcharging battery
Output, current limited to protect charger from overloading
Optional charge indicators
INSTALLATION
The Euro Charger Automatic Battery Charger should be installed in an area with
adequate ventilation.
Mount the charger using the four holes provided.
Connect the wiring from the batteries to the output terminal strip.
Double check battery wiring. Verify that battery voltage appears at the charger output
terminals.
Set the voltage selector to either the 115 volt or 230 volt position to match the input
source available.
Connect the input power to the input power terminal strip and energize charger.
Verify that power indicator is illuminated and charger is charging.
2
SPECIFICATIONS & WIRING DIAGRAM
SPECIFICATIONS:
Input: see chart
Output: see chart
Output Current: see chart
Charge Indicator: 0-20 amps 5%
Weight: 12 lbs
Model # Output Current Output Voltage Input Voltage Input Current Charge Indicator
091-90-12 12 Amps 12 230/115, 50/60 Hz 1.3/2.6 Amps 15 amps
091-90-24 6 Amps 24 230/115, 50/60 Hz 1.3/2.6 Amps 8 amps
IMPORTANT: Charger output wire size is 12 awg. Wire size is for a maximum length of 20
feet. If wiring is to be longer, larger wiring is required. Additional information is available on
request.
3
4
INSTALLATION RECORD & WARRANTY
Date Installed
Installed By
Vehicle Identification
Vehicle Owner
WARRANTY
All products of Kussmaul Electronics Company Inc. are warranted to be
free of defects of material or workmanship. Liability is limited to repairing or
replacing at our factory, without charge, any material or defects which
become apparent in normal use within 3 years from the date the equipment
was shipped. Equipment is to be returned, shipping charges prepaid and will
be returned, after repair, shipping charges paid.
Kussmaul Electronics Company, Inc. shall have no liability for damages
of any kind to associated equipment arising from the installation and /or use
of the Kussmaul Electronics Company, Inc. products. The purchaser, by the
acceptance of the equipment, assumes all liability for any damages which
may result from its installation, use or misuse, by the purchaser, his or its
employees or others.
5
Loading...