Kushlan Products Industrial Portable Tripod Mixer User Manual

Operating Instructions

and

Parts Manual

Industrial Portable
Tripod Mixer

with Interchangable drums

for

KU S H LA N

P R O D U C T S ,

LLC

WA R NING

Do not attempt to start or operate the Do not attempt to start or operate the

Do not attempt to start or operate the

machine until all the Instructions have been read

machine until all the Instructions have been read machine until all the Instructions have been read

and Understood by the operator.

and Understood by the operator. and Understood by the operator.

Failure to do so could result in Serious bodily

Failure to do so could result in Serious bodily Failure to do so could result in Serious bodily

injury and/ or Property damage!

injury and/ or Property damage!injury and/ or Property damage!

12010 Dairy Ashford Road, Suite 160, Sugar Land, TX 77478

(281) 313 - 2506  [phone]

!!

SHOULD YOU REQUIRE ANY

SET-UP OR OPERATING ASSISTANCE WITH YOUR PRODUCT,

DO NOT RETURN TO ORIGINAL PLACE OF PURCHASE.

· After referring to the operation manual, if assistance is still needed, please consult our web Site at

www.kushlanproducts.com. From our web site you may e-mail us directly.

· If assistance is still required, please call our customer service department at 1-800-469-4178.

Safety Alert Symbol: This safety alert symbol is used to
attract your attention!

Personal Safety is involved when you see this symbol, Pay extra
attention, become alert-be sure to heed its message. Failure to
do so may lead to serious personal injury or damage may occur.

!

Warnings and safety instruction: If these warnings and safety
instructions are not read and carefully followed, serious personal
injury could occur.

WAR NI NG S

! !

1. Do not use, start, or attempt to operate this machine until all of the instructions have been read and fully understood.

2. Never allow anyone to operate this machine unless the person is well acquainted with these rules of safe operation.

3. Never operate this machine without all guards in place and rmly attached to the machine.

4. Make certain that the mixing drum is clear of obstructions and stand clear of the machine with out all guards in place

and rmly attached to the machine.

5. When cleaning, lubricating, or adjusting the mixer, disconnect the power plug.

6. Keep all people (except operator) a minimum of ve (5) feet away from the machine during operation.

7. Always make certain that the mixer is connected to a properly grounded electrical circuit to protect the operator

from possible electric shock.

8. Do not plug or unplug the motor while standing in or around damp or wet ground.

9. Do not start the motor if the drum is Fully loaded

10. Do not overload the mixer

11. Never attempt to move the mixer while the motor is running.

KU S H LA N

P R O D U C T S ,

LLC

1

Safety

!

Instructions

For the safety of yourself and others around you, it is extremely important that you observe the following notes.

1. Keep hands and clothing away from moving parts at all times.

2. Do not operate this machine under the inuence of alcohol or while taking medication that impairs the senses or reactions.

3. Make certain that the work area around the machine is clear of debris and obstructions.

4. Keep all unauthorized and untrained people away from the machine at all times.

5. Never let the mixer run unattended even for a brief moment.

6. Turn o the motor when you leave the machine.

7. Only use or operate the mixer on level ground to prevent the mixer from tipping over.

8. Do not abuse the power cord; i.e. Never yank on the cord to disconnect it. Keep the cord away from heat, oil, and sharp edges.

9. Do not over reach while working with the mixer. Keep proper footing and balance at all times when loading or unloading the mixer.

10. Never allow children or inexperienced operators to operate or repair the mixer.

11. Use only factory authorized parts for replacement.

12. Keep these operation instructions with the machine at all times.

13. Always wear safety glasses and safety shoes when operating and moving equipment.

14. Safety decals-replace missing or damaged safety decals.

Mixer

Instructions

!

A. Lubrication: Grease wheel bearings (29). Apply any type of multipurpose grease until grease begins

to come out of the bushings/bearings on wheels.

Lubricate all ttings before each use

B. Extension Cord: Use only outdoor approved, 14 gauge or larger, grounded extension cords.

C. General: Check all screws for tightness before each use.

D. Concrete Mixing: Do not insert sharp objects into the plastic mixing drum. Doing so will damage the drum.

E. Cleaning: Do not spray water on or into the motor. Thorough cleaning of the mixer after each use is

recommended and will add to the service life.

KU S H LA N

P R O D U C T S ,

LLC

2

Model 450DD & Removable Liner Parts List

Reference DESCRIPTION Note

1

2

3

4

5

6

7

8

Plastic Drum

Wire basket for Drum

Hex Socket Screw

Gear Motor Mounting Base

Gear Motor

R-Clip Pin

Dump Handle

Side Handle

M14X75

3

9

10

11

12

13

14

15

16

Bolt

Pivot Axle Pin

Draw- Bar

Bolt

PU Foam Wheel

Wheel Bearing

R-Clip Pin

Main Frame

M10X100

12

M10X60

16X22

3

17

18

Swivel Bracket

R-Clip Pin

3