Kusam-meco CA-1000, CA-2000 User Manual

An ISO 9001:2008 Company

®

G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA.

Sales Direct.: 022 -2 4156638, Tel. : [phone], Fax : 022 - 24149659
Email : [e-mail], Website : www.kusamelectrical.com

An ISO 9001:2008 Company

®

All Specifications are subject to change without prior notice

Navin.com/D.drive/sandeep gupta/New catlog Dec 2011/CA 1000 & CA 2000.cdr

AC/DC CURRENT CLAMP ADAPTOR

Model CA-1000 / 2000

5 FUNCTIONS RANGES

FEATURES :

? Basic Accuracy : 1.5%rdg + 2A
? CA1000/CA2000 Current Clamp is a transducer which will allow your multimeter to measure

electrical Current upto 500/1000/2000 amperes AC or DC, with a Frequency response
upto 400Hz.

? The clamp is built with a design of finger guard which ensures user operating the clamp

under a safety situation, with a rugged case that is shock resistant and fire-retardant.

? When measuring current with this clamp, there is no need to break a circuit or to affect

the isolation.

? It can be used for waveform analysis by connecting it to an oscilloscope.
? Auto Zero function

GENERAL SPECIFICATIONS :

ï Jaw Opening Size : 57mm conductor, 70 x 18 mm bus bars
ï Measuring Range : 0 to 1000A AC or DC max. (Model CA 1000)

0 to 1500A AC or 0 to 2000A DC max. (Model CA 2000)

ï Output : 0 to 1V rms or DC with > 1 Meg Ohms input impedance (Model CA 1000)

0 to 1.5V rms or 0 to 2V DC with > 1 Meg Ohms input impedance (Model CA 2000)

ï Transfer Rate : 1mV / 1A
ï System Accuracy : Current clamp accuracy + DMM accuracy
ï Operating Temperature : 0°C ~ 50°C; at < 70% R.H.
ï Storage Temperature : -20°C to 60°C; < 80% R.H.
ï Temperature Coefficient : 0.1 x (specified accuracy) / 1°C

(0°C to 18°C, 28°C to 50°C)

ï Altitude : 6561.7 feet (2000M)
ï Output : Coil cable with straight banana plug.
ï Max. wire length : 3.5 meter when fully stretched.
ï Low battery indicator : Red LED lighting.
ï Power Supply : 9V DC battery
ï Dimension : 100(W) x 224(L) x 40(H) mm
ï Weight : Approx. 490 gms. (Including battery)

SAFETY :

? The instrument complies with class II, CAT II 1000V of

the EN61010-1, and EN61010-2-032 standards.
Pollution degree 2 in accordance with IEC 664
indoor use.

? The product complies with the requirements of the

following European community Directives : 89 /336 /
EEC (Electromagnetic Compatibility) and 73 / 23 / EEC
(Low Voltage) as ammended by 93 / 68 / EEC
(CE marking).

ELECTRICAL SPECIFICATIONS : CA-1000 / CA-2000

Accuracy is ± (% of reading + number of digits) at 23°C ± 5°C, 70% R.H. Maximum.

Overload Pr otection : 1200A for 60 sec. maximum.
*1500A in model CA 2000

± (1.5% rdg + 2 A)
± (3.5% rdg + 2 A)

± (2.0% rdg + 3 A)
± (3.5% rdg + 3 A)

± (3.5% rdg + 3 A)

AC CURRENT (Average Sensing)

RANGE

0 - 400 A / 50 Hz - 60 Hz
0 - 400 A / 61 Hz - 400 Hz
400 A - 1000 A / 50 Hz - 60 Hz
400 A - 1000 A / 61 Hz - 400 Hz
1000 A - 1500 A*

ACCURACY

Overload Pr otection : 1200A for 60 sec.
maximum.
*2000A in model CA 2000

CURRENT CLA MP ACCURA CY :

± (1.5% rdg + 2 A)
± (2.5% rdg + 2 A)

± (3.5% rdg + 3 A)
± (3.5% rdg + 3 A)

DC CURRENT

Range

0 ~ 400 A
400 A ~ 800 A
800 A ~ 1000 A
1000 A ~ 2000 A*

Accuracy

ACCURACY

TOTAL

ACCURAC Y

Current Clamp Accuracy +
DMM Accuracy

ACCESSORIES :

Carrying Case, Battery installed & User’s manual.

MUMBAI

TEST CERTIFICATE

DCA/ACA CURRENT CLAMP ADAPTOR

This Test Certificate warrantees that
the product has been inspected and
tested in accordance with the published
specifications.

The instrument has been calibrated by
using equipment which has already
been calibrated to standards traceable
to national standards.

MODEL NO. _________________

CA-1000/2000

SERIAL NO. ___________

DATE: ___________

ISO 9001

REGISTERED

QC

PASS

KUSAM-MECO

WARRANTY

Each “KUSAM-MECO” product is warranted to be free
from defects in material and workmanship under normal
use & service. The warranty period is one year (12
months) and begins from the date of despatch of goods.
In case any defect occurs in functioning of the instrument,
under proper use, within the warranty period, the same will
be rectified by us free of charges, provided the to and fro
freight charges are borne by you.

This warranty extends only to the original buyer or end­user customer of a “KUSAM-MECO” authorized dealer.

This warranty does not apply for damaged Ic’s, fuses,
burnt PCB's, disposable batteries, carrying case, test
leads, or to any product which in “KUSAM-MECO’s”
opinion, has been misused, altered, neglected,
contaminated or damaged by accident or abnormal
conditions of operation or handling.

“KUSAM-MECO” authorized dealer shall extend this
warranty on new and unused products to end-user
customers only but have no authority to extend a greater
or different warranty on behalf of “KUSAM-MECO”.

“KUSAM-MECO’s” warranty obligation is limited, at
option, free of charge repair, or replacement of a defective
product which is returned to a “KUSAM-MECO”
authorized service center within the warranty period.

THIS WARRANTY IS BUYER’S SOLE AND EXCLUSIVE
REMEDY A N D IS IN LIE U OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. “KUSAM-MECO” SHALL NOT BE LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR
CO N SE Q UEN TI AL D AM AG E S O R LO SS ES ,
INCLUDING LOSS OF DATA, ARISING FROM ANY
CAUSE WHATSOEVER.

All transaction are subject to Mumbai Jurisdiction.