Kurgo Shorty Bench Seat Cover User Manual

1) Insert Plastic Tubing (A)

near seat belt closures, push
into center seat division.
Remove tube straps if not
applicable.

2) For vehicles with access

to the back of the seat, wrap

Securing Straps (B) around

the sides of the seat and
connect in the back. Adjust
for snug fit.

3) Tuck bungee Cord (C)
under the edge of the seat.
See Figure 1 and adjust to
tighten either end of Cord
Lock (E). The under-seat
bungee cord simply slips
through Triangle (D) and locks
to the left and right cord locks.

INSTALLATION INSTRUCTIONS

Underside details are
shown as dashed lines

4) Use the Storage Pocket
(F) for anything you like! We
suggest lots of fun dog stuff!

Figure 1

Push top of
Cord Lock (E)
down and pull
Cord (C) to
tighten.

WASHING INSTRUCTIONS:

1. Brush off loose dirt/hair with a dry brush.

2. Wash with cold water, if necessary machine wash in front loading unit with mild detergent.

3. Always hang to dry.

NOTICE:

Please contact Kurgo directly with any product or return inquiries. If you have any questions or conerns please contact
us directly before you contact the retailer; we are great problem solvers. We hope that you will be happy with your
purchase and will think of Kurgo next time you travel with your dog.

See the complete line of
dog travel products at kurgo.com

Become a fan of Kurgo on
Facebook and receive all the latest
updates, giveaways and contests.

10/13 ~ English

Kurgo Products • 2D Fanaras Drive, Salisbury, MA 01952 • 877-847-3868 • kurgo.com • [e-mail]