Your appliance at a glance / Technical data EKE 854.1
5 cooking zones
Total connected load: 8.2 kW
1 dual-circuit cooking zone 12 cm / 700 W or 18 cm / 1700 W
2 cooking zones 14.5 cm / 1200 W each (can also be used as frying zone 2400 W)
2 cooking zones 18 cm / 1800 W each
EKE 854.1
H1-50-01-02
1
1Dual-circuit cooking zone
2Sensor keys for cooking zones
3Off sensor
4Sensor standby switch
6
5
234
5Childproof lock (sensor lock)
6Frying zone
2
Service Manual
VKS-H
Your appliance at a glance / Technical data EKE 804.2
4 cooking zones
Total connected load: 7.2 kW
1 dual-circuit cooking zone 12 cm / 750 W or 21 cm / 2200 W
1 cooking zone 14.5cm / 1200 W
1 dual-circuit frying zone 14 cm / 1100 W or 24.0 cm/ 2000 W
1 cooking zone 18 cm / 1800 W
EKE 804.2
H1-50-01-02
6
1234
1Dual-circuit cooking zone
2Sensor keys for cooking zones
3Off Sensor
4Sensor standby switch
5Childproof lock (sensor lock)
6Frying zone
5
3
Service Manual
VKS-H
Your appliance at a glance / Technical data EKE 604.2
4 cooking zones
Total connected load: 6.7 kW
1 dual-circuit cooking zone 12 cm / 700 W or 18 cm / 1700 W
1 cooking zone 14.5cm / 1200 W
1 dual-circuit frying zone 14 cm / 1100 W or 24.0 x 14.0 cm/ 2000 W
1 cooking zone 18 cm / 1800 W
EKE 604.2
H1-50-01-02
6
1234
1Dual-circuit cooking zone
2Sensor keys for cooking zones
3Off Sensor
4Sensor standby switch
5Childproof lock (sensor lock)
6Frying zone
5
4
Service Manual
VKS-H
Using the cooking zones
EKE 854.1 / EKE 804.2 / EKE 604.2
Touch the sensor pad for approx. 2 seconds. The LED display
above the pad will then light up and the appliance will go
into operation (standby mode).
The standby mode automatically switches itself off, if
- no cooking zone is activated within 20 minutes (after 10
or if
- the appliance is not used for 10 minutes after starting
H1-50-01-02
seconds an acoustic signal will indicate that the appliance
will switch itself off after a further 10 seconds)
operation.
The cooking setting
You have 9 cooking settings available.
Select the required cooking setting with the plus or minus
pad. The setting will be indicated in the display.
The "0" position is visible for about 2 seconds after the
appliance switches off.
If you touch the plus pad, the cooking zone starts at cooking
setting 5, without boost.
When the minus pad is touched the cooking zone will start at
setting 9 and the automatic boost is automatically switched
on.
Switching off a cooking zone:
Touch the plus and minus pads simultaneously.
5
VKS-H
Service Manual
EKE 854.1 / EKE 804.2 / EKE 604.2
H1-50-01-02
Operating time in seconds
The temperature of the cooking zones is time-adjusted, in the same way as the energy control
unit. Depending on the cooking setting, the corresponding cooking zone will be switched on or
off as described in the following table.
Cooking setting123456789
ON in secs.14691114212847
OFF in secs.46434138363326190
This means, for instance, that at cooking setting 6 the control unit is switched on for 14 seconds
and is then switched off for 33 seconds. Thus the total amount of time is 47 seconds. Then the
process starts again.
Operating time in seconds
9
8
7
6
5
4
3
3,53
2
1,18
1
05101520253035404550
11,28
8,7
5,88
21,15
14,1
28,2
47
18,8
25,85
32,9
35,72
38,31
41,13
43,48
45,83
0
OFF in secs.
ON in secs.
6
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.