Kupo Master C User Manual
Kupo c stand w/Turtle Base is easy to set up, durable and solid stand specially designed for professional
photographers, film makers and videographers. The unique leg locking system makes deploying and
collapsing the legs a snap and can be done within seconds with pulling up the spring ring and twist the stand.
More features are including :
1. Zinc casting alloy makes the leg base holders most solid and sturdiest.
2. Stainless steel heli-coli give protection for the aluminum riser from being damaged by stainless steel
bolt of knob.
3. The unique hollow design of the junior pin receiver on the base also makes dust, sands and water pass
through easily for better cleaning and easy maintenance.
Master Series C Stand
w/Turtle Base (Quick Release C Stand)
2 riser, 3 sections
Dia. 35mm, 30mm, 25mm
Chrome plated steel for silver
Powder coated steel for black
CT-20M/MB 20” C Stand (Silver/ Black)
102cm
40.2”
100cm
39.4”
180cm
70.9”
10kg
22lbs
6.7kg
14.8lbs
A
CT-30M/MB 30” C Stand (Silver/ Black)
127cm
50”
100cm
39.4”
260cm
102.4”
10kg
22lbs
7.5kg
16.5lbs
A
CT-40M/MB 40” C Stand (Silver/ Black)
152cm
59.8”
100cm
39.4”
335cm
131.9”
10kg
22lbs
8.3kg
18.3lbs
A
Japanese Type is available Upon request.
Master C Stands
Patented!
The innovative spring ring locking system designed.
Demonstration of deploying Kupo turtle base C stand
1) Keep the legs up and pull up
the spring ring.
2) Twist the stand and release
the spring ring.
3) Completely setup after a snap
deploying.
23
C stand Base:
K
C stand base is chrome plated steel may be used as a very low stand for backlites or different types of
stand with various extension columns. The compact size is also available for more lightweight, better
storage and transportation.
CT-BS C Stand Base
35cm
13.8”
Master C Stands
95cm
37.4”
3.5kg
7.72lbs
30kg
66.1lbs
28mm
1-1/8”
CT-SBS Compact C Stand Base
35cm
13.8”
75cm
29.5”
3.3kg
7.3lbs
30kg
66.1lbs
28mm
1-1/8”
Japanese Type is available Upon request.
With KS-200 (Optional)With
Sliding leg C stand:
It features one sliding leg, which allows the stand to adapt to uneven terrain such as stairs or hillsides.
This feature provides optimum support of your light heads, reflectors or gobos.
Master Series C Stand with Sliding Leg
2 riser, 3 sections
Dia. 35mm, 30mm, 25mm
Chrome plated steel for silver
Podwer coated steel for black
CS-20M/MB 20” C Stand (Silver / Black)
97cm
38.2”
100cm
39.4”
180cm
70.9”
10kg
22lbs
5.3kg
11.7lbs
A
CS-30M/MB 30” C Stand (Silver / Black)
112cm
44.1”
100cm
39.4”
250cm
98.4”
10kg
22lbs
6kg
13.2lbs
A
CS-40M/MB 40” C Stand (Silver / Black)
137cm
54”
100cm
39.4”
335cm
131.9”
10kg
22lbs
6.9kg
15.2lbs
A
24
Loading...