Kupa X12, X11, X15 Operation Manual

KUPA X11 Tablet PC

Quick Start

1.Unpack

Remove X11 and other component from the box .Save the box,
documents receipts and other packaging
materials for future use. Please contact shipper and seller immediately if
there are any damage to box or the
unit.Check to verify if the unit received has.

2.Check content

1 / 22

Note: How to use the Multifunction Key and Up/Down Keys
During boot up screen:
Up -> Up Key on keyboard
Down -> Down Key on keyboard
Multifunction Key -> Enter Key on keyboard
While Windows is running
By pressing Multifunction Key alone, it is the Windows Key
By pressing Up Key alone, it increases the audio volume
By pressing Down Key alone, it decreases the audio volume
By pressing and hold Multifunction Key and pressing Up Key, it increases the
brightness level
By pressing and hold Multifunction Key and pressing Down Key, it decreases
the brightness level

X11 package will include
X11 with battery installed
X11 pen
Screen cleaning cloth
Anti-reflective Film (depend on options)
X11 Soft Shell case (depend on options)
Power adapter and power cord (2 feet or 3-pin plug)
KUPA X11 User's Manual
If any items are missing or damaged, contact your dealer immediately

3.Connect power cord

Connect the power cord to the power adaptor.
Connect the power adapter's DC output to the X11’s DCIN 19V port.
Connect the power cord to the power outlet, at this time the indicator light
under the power key at the top of the computer would light up.

2 / 22

4.Boot up X11

Press the power key for 2 seconds to start X11.
When you boot up X11 at the first time, please do not force to shut down the
PC halfway till the
system is completely activated.

Operation Manual

1.Common Operation

1.1 Express Setup

Boot up X11

Press the power key for 2 seconds to start the PC.

Shutdown X11

Click the start menu button “close tablet pc” to shut down the tablet under
normal condition.
If the operating system fail to shut down the tablet, press the power key for 3
seconds to force shutdown.
Please DO NOT do so if the tablet is under normal condition as this may cause
data loss and system problem.
The system prompt interface may occur when restart the tablet PC after forced
shutdown.

Quick Sleep/Wakeup

When power button is pressed while X11 is running Windows 7, X11 will enter
the sleep mode immediately.
While in sleep mode, X11's power button will flash intermittently. User can
wake up X11 quickly by pressing the power button.

Charging

It is recommended that during first times of use, user completely depletes the
battery and then recharge the full for best battery life. This is known as battery
cycling. It is also recommend to perform battery cycling at least once a month
for optimal battery life.
Under normal operation, Windows operating system will alert user to recharge.
The system will alert user again when battery level falls under 7%. The system

3 / 22

will attempt auto sleep when battery level drops below 5%.

Pen and Touch screen calibration

1)Go into “control panel” select “Tablet PC Option".

2) Under Display Option, Select Calibrate and follow the onscreen steps.

Select what to Calibrate, Pen or Touch input.

Follow the onscreen instruction to complete.

4 / 22

Save the calibration data.

User could remove saved calibration data by pressing "Reset" in the Tablet PC
Option.

Setting display resolution

Please using the recommended display resolution corresponding to the model,
which is also the default resolution, for optimal image and video quality. For
X11, it is 1366 by 768.
If the current display resolution is not the recommended one, adjust in the
“display” “screen resolution” option.

Adjust the display orientation

The default display orientation of this tablet PC is landscape, when you rotate
the tablet PC the screen display more than 90 degrees either way, X11 would
change the display orientation after a short pause. When browsing texts or
pages , adjust the orientation to vertical may be more comfortable for you.

Adjust display orientation autorotation

Press with either finger or pen on an used portion of the desktop for 2 seconds

then select the “Graphics

Properties” . You will see an Intel graphic control box. To disable auto rotation

option, uncheck the Enable

5 / 22

Rotation Option in the Rotation section. To enable auto rotation option, check
the Enable Rotation Option in the Rotation section.

1.2 Drivers

Device drivers

Kupa has already installed necessary drivers needed for Windows 7 on X11.
In the situation when you do need to download driver, please visit Support
section on www.kupaworld.com .

Update hardware drivers in Windows7 system

In the event that you do need to update your driver:

1) Long press the desktop “computer” icon, right click to start the menu .

2) Click "Properties" → "Device Manager."

3) Right click the device which need installing the drivers, then select the

“properties” option

4) Click the “driver tab”

5) Click the “update driver”, choose a specific location (disk symbol: \folder) to

place the drivers, then select “install the driver” to install, follow the prompts to
complete the operation.

1.3 Network

Connect the Internet

X11 can connect to the Internet through Wi-Fi or 3G wireless network. X11 is
also capable of connecting to a network using a RJ45 network cable if user
installs an USB Ethernet adapter.

Configuring Wi-Fi Connection

1) Click on at the lower right corner of the Windows desktop
screen,

6 / 22

2) Select the target Wireless Access Point, click “connect”

3) Connecting to the Wireless Access

7 / 22