Kunzle & Tasin NEW GOLIA PLUS Maintenance Manual
1
SINGLE DISC MACHINE
NEW GOLIA PLUS
USER &
MAINTENANCE MANUAL
2
NEW GOLIA PLUS User Manual_May 2013 Edition
Foreword
This manual contains important information on the safe use and operation of
this machine.
Failure to read this manual before operating, adjusting or servicing this
machine could cause injury or damage to persons or objects.
Anybody operating the machine should understand how to use and operate it
before starting it up.
Keep this manual for future reference.
This manual is an ENGLISH translation of the original version in Italian.
For a new manual contact:
Kunzle & Tasin S.r.l.
REGISTERED HEADQUARTERS
Via Circonvallazione est, 2/6
27023 Cassolnovo (PV) - Italy
OPERATIONAL HEADQUARTERS
Via Cajkovskij, 14
20092 Cinisello Balsamo (MI) - Italy
Tel. +39 02 66040930
Fax +39 02 66013445
info@kunzletasin.com
www.kunzletasin.com
3
NEW GOLIA PLUS User Manual_May 2013 Edition
Contents
Key for machine symbols
4
Operator safety instructions
4
Storage
5
Introduction
5
Machine data plate
5
Transporting and handling the machine
6
Transport with one person
6
Transport with two people
6
Commencing operation
7
Correct use
7
Instructions for assembly following transportation
7
Instructions for electrical connection
7
Cables, extensions and plugs
8
Instructions on removing sawdust generated during use
8
Recommendations on prevention measures for users
9
Personal safety measures
9
Compliance with safety measures and warnings 9
Instructions on correct machine use 10
Machine specifications
11
Machine warnings
12
Prohibited use 12
Preparing to start the machine
12
Starting the machine
13
Tilt enable microswitch
14
Stopping the machine
14
Machine adjustment procedures
15
Centring the accessory disc 15
Adjusting sanding direction 15
Adjusting handle height 15
Routine maintenance to be performed
15
Spare parts
15
Emergency situations (for the user)
16
Faults 16
Causes 16
Solutions 16
Declaration of Conformity
17
Disposal
18
Notes
19
4
NEW GOLIA PLUS User Manual_May 2013 Edition
Key for machine symbols
READ THE INSTRUCTIONS CONTAINED IN THIS
USER AND MAINTENANCE MANUAL BEFORE
USING THE MACHINE
HEARING PROTECTION DURING USE IS
RECOMMENDED
PROTECTION OF THE AIRWAYS DURING USE IS
RECOMMENDED
HAZARD DUE TO ELECTRICITY
HAZARD DUE TO MOVING PARTS
Operator safety instructions
HAZARD
means Failure to comply with HAZARD notices on the machine or in this manual
may result in death or serious injury to the operator or other people. Read
and comply with all HAZARD notices on the machine or in this manual.
WARNING
means Failure to comply with WARNING notices on the machine or in this
manual may result in injury to the operator or other people. Read and
comply with all WARNING notices on the machine or in this manual.
CAUTION
means Failure to comply with CAUTION notices on the machine or in this manual
may result in injury to the operator or other people. Read and comply with
all CAUTION notices on the machine or in this manual.
HAZARD:
Failure to read the NEW GOLIA PLUS machine manual before operating, adjusting or performing maintenance
operations on the machine could cause injury or damage to persons or objects. Anyone operating the machine
should understand how to use and operate it before starting it up.
5
NEW GOLIA PLUS User Manual_May 2013 Edition
Storage
It is advisable to store the machine in its original packaging.
If the machine is removed from the original packaging and is not used for some time ensure the wheels and disc are
not in contact with the ground. In this case use two supports at least 20mm in height to rest the machine on, ensuring
contact is with the base frame.
WARNING
This equipment must not be used or kept outside in wet conditions. Store the machine in a dry building,
otherwise the machine could be damaged.
Storage temperature from -20°C to 50°C.
Introduction
Machine data plate
The following information can be found on the machine data plate:
1. Machine model
2. Safety symbols
3. Motor power
4. Frequency
5. Supply voltage
6. Name of manufacturer
7. Country of manufacture
8. Year of manufacture or see
serial number
9. Serial number:
The serial number is formed as follows:
- the first two numbers refer to the year of manufacture (13 = 2013)
- the second group of three numbers indicates the date the machine was
manufactured (029 = 29th January)
- the last two numbers indicate the progressive number of machines
produced on that day of manufacture (16 = sixteenth machine)
6
NEW GOLIA PLUS User Manual_May 2013 Edition
Transporting and handling the machine
WARNING
Due to the weight of the machine the handle and any accessories should be removed
before it is transported. Request assistance to lift the machine.
Transport with one person
The machine can be dismantled into two parts to facilitate transportation:
Handle Motor unit
Proceed as follows:
1. Ensure the power supply cable is disconnected from the mains
and the machine.
2. Disconnect the power supply cable and any suction cables
from the lower part of the machine body at the back.
3. Hold the handle firmly in
a vertical position.
4. Loosen the 4 VTCEI M8x30 screws
under the base frame to release the
handle support from the base, which
can then be transported separately.
5. Lift the body of the machine
(bending at the knees) by
clasping the machine under the
frame at the back and front,
using the transportation handle
on the front for assistance.
Transport with two people
1. An operator positioned behind the
machine should grasp the handle grips.
2. A second operator positioned at the front should lift
the machine using the black handle.
Loading...