KUMYOUNG KSM100T Users Manual

1. Basic Items

KSM-100/T

USER Guide

KSM-100/T

(solostar duet)

2 x AA Batterys

2. How to operate

(1) Additional microphone for the solostar karaoke system

(2) Simply plug and play, no additional hardware required

(3) Rich stereo sound with TV or external audio system

3. Functions

■ LED ON state : Battery check "OK"
Paiting Check "OK"

■ LED Flashing state : Prepared for connection

■ LED OFF state : Power Off
※ Check batteris in case that LED is not lighting when switching
on the microphone.

■ Switch functions : ON , MUTE , OFF

4. Specifications

General Model No. : KSM-100/T

Dimensions : 1.7 (Φ) x 10 (L) Inch
Weight : 1.4 lb (without batteries)
Modulation Freq. : 2.404 GHz, 2.438 GHz, 2.476 GHz (3 CH), FSK.
Wireless Range : 16 ft. - 22 ft. (30 ft. Max.)

Power Power Supply : 3 V (2 x AA Battery 1.5 V)

Battery Life : Up to 10 hours
Power Consumption : 50 mA (140 mW)

FCC notice to users and product statements
This device complies with part15 of the FCC Rules.
Operation is subject to the following two conditions;
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.

CAUTION : Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.

However,

There is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio / TV technician for help.

Modifications not expressly approved by the manufacturer could void the user's authority
to operated the equipment under FCC rules.

This Device has been evaluated to comply with RF exposure requirement for general
use limit in portable condition.

IC Warning
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation
of the device.