KUK JE TONG SHIN 08021004 User Manual

KUK JE TONG SHIN CO., LTD.

Bluetooth Mono Headset

(KHM-210R) User Manual

1

Table of contents

KUK JE TONG SHIN CO., LTD.

Power on
Power off
Charging
Low battery
Pairing
Connect
Volume control
Call usage

- Answering a call

- Making a call

- Ending a call

- Call waiting

- Transferring a call

Specification

2

KUK JE TONG SHIN CO., LTD.

Power on

- Press and hold the PWR/END key for 3 seconds

Î The power will turn on and a booting tone will play .

Power off

- Press and hold the PWR/END key for 3 seconds.

Î A shutdown tone will play, the Bluetooth link will be disconnected,

and the power will turn off.

Charging

- Remove the cover on the charging port and connect the charger.

- When the charger is connected with power on or off, the headset will turn off. While charging, the LED

indicator will show a solid blue light.

- When charging is complete, the LED indicator will turn off.

- It takes 3 hours to fully charge the headset.

-

Low battery

The LED indicator will blink blue when the battery power is low.

When the battery is not charged, the LED indicator will be blinked blue and then turn off.

When this occurs, the battery needs to be charged.

Pairing

- With the KHM-210R off, press and hold the PWR/END button for 6+ seconds.

Î You will hear a short beep and the LED

when the device enters Pairing Mode.

► Using your handset, find the Bluetooth Menu and “search for” or “add” new devices.

► Select “KHM-210R” from the list of devices and pair it with your handset.

Î When asked for the Pass/PIN code during the pairing procedure, please enter “0000” (4 Zeros).

Î Once pairing has completed successfully, you will hear a beep

- ► After pairing successfully, be sure to “Connect” to the KHM-210R

- If you want to pair with other devices in the future, the headset must be in Pairing Mode.

- If it will be not connected the “Pairing” for five minutes, it will be turned off.

indicator will be blinked blue,

3