Kuchef JK-108 Instruction Manual

INSTRUCTION MANUAL
IM Version No: V1.2 Issue Date: 29 July 2015
N13275
Model Number JK-108
1.7L Glass Kettle
AFTER SALES SUPPORT
info@tempo.org
AUS
MODEL: JK-108 PRODUCT CODE: 51373 10/2015
2
AFTER SALES SUPPORT
info@tempo.org
AUS
MODEL: JK-108 PRODUCT CODE: 51373 10/2015
Welcome
Congratulations on choosing to buy a Kuchef® product.
All products brought to you by Kuchef® are manufactured to the highest
standards of performance and safety and, as part of our philosophy of customer service and satisfaction, are backed by our comprehensive 3 Year Warranty.
We hope you will enjoy using your purchase for many years to come.
3
AFTER SALES SUPPORT
info@tempo.org
AUS
MODEL: JK-108 PRODUCT CODE: 51373 10/2015
02 Welcome
04 Warranty Details
05 General Safety Instructions
08 Product Overview
09 Getting Started
10 Instructions
12 FAQs and Troubleshooting Guide
13 Other Useful Information
15 Repair and Refurbished Goods or Parts Notice
Contents
4
AFTER SALES SUPPORT
info@tempo.org
AUS
MODEL: JK-108 PRODUCT CODE: 51373 10/2015
1.7L Glass Kettle
Warranty Details
The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion, solely at our option with no charge for parts and labour. The benefits conferred by this warranty are in addition to all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
YEAR WARRANTY
3
5
AFTER SALES SUPPORT
info@tempo.org
AUS
MODEL: JK-108 PRODUCT CODE: 51373 10/2015
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type of product. The safety precautions enclosed herein reduce the risk of re, electric shock and injury when correctly adhered to. Keep the manual in a safe place for future reference, along with the completed warranty card, purchase receipt and carton. If applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when using an electrical appliance, including the following:
Electrical safety and cord handling
Voltage: Before connecting the kettle to the power supply, make sure your outlet voltage and circuit frequency correspond to the voltage indicated on the appliance rating label and your outlet socket is properly earthed. If this is not the case, do not use the kettle.
Separate circuit: Do not use any other appliance at the same time on the same electrical circuit as it may overload the circuit and blow the fuse or circuit breaker.
Water: To protect against fire and electric shock, do not immerse the cord, plug, power base or the kettle itself in water or other liquid. Do not expose the electrical connections to water.
Power cord: Do not kink, bend, squash, strain or damage the power cord and protect it from sharp edges and heat. Do not let the cord hang over the edge of a table or benchtop. Do not let it touch hot surfaces. The cord should be run in such a way that there will be no risk of anyone pulling it inadvertently.
No extension cord: Do not use an extension cord with this kettle.
Damage: Do not pick up or operate the appliance if the power supply cord,
plug, power base or kettle housing is damaged, or after it malfunctions or has been damaged in any manner.
WARNING: A damaged cord or plug must be replaced by the manufacturer or a qualified person in order to avoid a hazard. In case of damage, contact
the after sales support line for advice.
RCD: Unless your home is already fitted with a residual current device (safety
switch), we recommend installing a residual current device to lessen the risk of scalding or other injury from hot water, which may be ejected if the heating element ruptures. Contact a qualified electrician for advice.
Loading...
+ 11 hidden pages