KTV Global LT64BD User Manual
N
OPERATING INSTRUCTIONS
PROFESSIONAL INSTALLATION ONLY
MODEL : LSM64
FOR RV-SPECIFIC DC-ONLY OPERATION
PLEASE READ THIS ENTIRE OWNER’S
MANUAL BEFORE USING THIS LCD TV.
IMPORTANT NOTE :
WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR A VIDEO
CASSETTE PLAYER, VIDEO GAME, OR CAMERA.
TELEVISION BROADCAST RECEPTION WILL BE ADVERSELY AFFECTED BY CONDITIONS SUCH AS
MOTION, CHANGE OF DIRECTION, ATMOSPHERIC ACTIVITY, AND LOCAL SURROUNDINGS.
IT IS THEREFORE LIKELY THAT BROADCAST PICTURE QUALITY WILL BE MARGINAL WHEN THIS
SYSTEM IS USED IN A MOBILE ENVIRONMENT.
MOBILE
APPLICATIONS
Ⓡ
6 . 4"TFT LCD TELEVISIO
"THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED
AND INSPECTED IN COMPLIANCE WITH THE ISO9001 QUALI-
TY ASSURANCE SYSTEM."
3
I M P O RTANT SAFEGUARDS
CAUTION :
·
ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS DEVICE WHICH ARE NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
WARNINGS :
·TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
·DO NOT OPEN THE CABINET. DANGEROUS HIGH VOLTAGE IS PRESENT. SERVICING
SHOULD ONLY BE PERFORMED BY QUALIFIED PERSONNEL.
·THIS LCD VIDEO SYSTEM SHOULD ONLY BE OPERATED WITH 12V DC.
GRAPHICAL SYMBOLS EXPLANATION
This lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (Servicing) instructions in the
literature accompanying the appliance.
2
CAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOTOPEN ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL
1 . Read Instructions-All the safety and operating instructions should be read before the appliance
is operated.
2. Retain Instructions-The safety and operating instructions should be retained for future refere n c e .
3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered
t o .
4. Follow Instructions-All operating and use instructions should be followed.
5 . C l e a n i n g -Unplug this product from power cable connector before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. A t t a c h m e n t s -Do not use attachments not recommended by the product manufacturer as they
may cause hazards.
7 . Water and Moisture-Do not install this product near water-for example, near a bath tub, wash-
bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.
8 . A c c e s s o r i e s -Do not place this product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the equipment.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should follow the manufacturer’s instructions, and
should use a mounting approved by the manufacturer.
9 . A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart combination
to overturn.
1 0. V e n t i l a t i o n -Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
1 1 . Power Sources-This product should be operated only from the type of power source indicated on
the marking label. lf you are not sure of the type of power supply to your car, consult your product
d e a l e r .
For products intended to operate from battery power, or other source, refer to the operating
i n s t r u c t i o n s .
1 2 . S e r v i c i n g -Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personn e l .
5
T ABLE OF CONTENTS
service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. lf liquid has been supplied, or objects have fallen into the product.
c. lf the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only
those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified techni-
cian to restore the product to its normal operation.
e. lf the product has been dropped, or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.
used replacement parts specified by the manufacturer or that have the same characteristics as
the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.
technician to perform safety checks to determine that the video product is in proper operating
c o n d i t i o n .
ommended by the manufacturer.
stoves, or other products (including amplifiers) that produce heat.
4
I M P O RTANT SAFEGUARDS
We strongly recommend that you carefully read all of the descriptions and operation procedures contained in this Owner's Manual prior to operating your new LSM64.
CAUTIONS
IMPORTANT SAFEGUARDS
TABLE OF CONTENTS
FEATURES
IDENTIFICATION OF SWITCHES AND JACKS
ACCESSORIES
REMOTE CONTROL USE
SIGNAL CONNECTION
POWER CONNECTION
DOME LIGHT CONNECTION
SET UP FOR CAR USE
TV OPERATION
SET UP BUTTON
PICTURE BUTTON
STATUS BUTTON
··························································
·············································
·················································
·························································
································
·······················································
···············································
················································
················································
············································
················································
······················································
·····················································
···················································
····················································
2
3
5
6
7
8
9
1 1
1 2
1 3
1 4
1 5
1 6
1 9
2 0
MORE USEFUL FUNCTIONS
RECEPTION DISTURBANCE
TROUBLESHOOTING GUIDE
SPECIFICATIONS
····················································
············································
············································
············································
2 1
2 3
2 4
2 5
6.4 INCH TFT LCD PANEL
12 Volt DC Operation
Frequency Synthesizer Tuning System
Full On-Screen Display of all Switching Functions
Full On-Screen Display of all Picture Functions
Automatic Power Shut-off & Memory Power On Functions
Full Remote Control
High Voltage Protection (Over 18 Volts DC)
Polarity Reversal Protection
Four Input Selections (TV Tuner, VIDEO1, VIDEO2, VIDEO3)
Wireless Remote Control
A/V and External Speaker Out, External Antenna Input, Ready for CAR Set Up
Memory Back Up (10 Years)
Extension Cable for KEC Mobile Application VCP
7
I D E N T I F I C ATION OF SWITCH AND JACKS
1. EXTERNAL ANTENNA IN JACK
2. DC INPUT JACK
3. EXTERNAL SPEAKER OUT JACK
4. AV2 INPUT JACK
5. AV OUTPUT JACK
6. AV1 INPUT JACK
7. AV3 INPUT JACK
8. LCD PANEL DROP-DOWN BUTTON
9. FM ANTENNA
10. LAMP
11. LAMP SWITCH
12. LAMP POWER INPUT
13. TV/VIDEO BUTTON
14. MENU BUTTON
15. CHANNEL DOWN(▼), UP(▲) BUTTONS
16. POWER BUTTON
17. REMOTE CONTROL SENSOR
18. STAND-BY INDICATOR
N O T E S :
Automatic Power Off Function:
This System will automatically turn off approximately 15 minutes after it last receives a video signal.
Memory Power On Function:
If this System was in power on mode when power was last removed (unplugged or ignition off),
it will automatically turn on when power is reapplied.
6
F E ATURES
1
2
3
4
5
6
7
8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1 8
Loading...