KTV Global LT104AA1 User Manual

THIS PRODUCT HAS BEEN DESIGNED, MANUFACTURED AND

INSPECTED IN COMPLIANCE WITH THE

ISO9001 QUALITY ASSURANCE SYSTEM.

Part No. 11907073

10.4"TFT LCD TELEVISION MONITOR/RECEIVER SYSTEM

INSTALLATION INFORMATION

& OPERATING INSTRUCTIONS

THIS PRODUCT IS INTENDED FOR PROFESSIONAL INSTALLATION ONLY

FOR MOBILE-SPECIFIC 12 VOLT DC-ONLY OPERATION

PLEASE READ ALL OPERATING INSTRUCTIONS BEFORE USING THIS PRODUCT.

IMPORTANT NOTE :
WHEN USED IN A VEHICLE, THIS SYSTEM IS INTENDED PRIMARILY AS A MONITOR FOR A VIDEO

CASSETTE PLAYER, VIDEO GAME, OR CAMERA.
TELEVISION BROADCAST RECEPTION WILL BE ADVERSELY AFFECTED BY CONDITIONS SUCH AS
MOTION, CHANGE OF DIRECTION, ATMOSPHERIC ACTIVITY, AND LOCAL SURROUNDINGS.
IT IS THEREFORE LIKELY THAT BROADCAST PICTURE QUALITY WILL BE MARGINAL WHEN THIS
SYSTEM IS USED IN A MOBILE ENVIRONMENT.

MOBILE
APPLICATIONS

MODEL: LSM-104

FCC WARNINGS :

This equipment may generate or use radio frequency energy. Change or modifications to this equip­ment may cause harmful interference unless the modifications are expressly approved in the instruc­tion manual.
The user could lose the authorization to operate this equipment if an unauthorized change or modifi­cation is made.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

DO NOT OPEN ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE
PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL

CAUTION :

ANY CHANGES OR MODIFICATIONS IN CONSTRUCTION OF THIS DEVICE WHICH ARE NOT
EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE
USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

WARNINGS :

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
DO NOT OPEN THE CABINET. DANGEROUS HIGH VOLTAGE IS PRESENT. SERVICING SHOULD
ONLY BE PERFORMED BY QUALIFIED PERSONNEL.
THIS LCD VIDEO SYSTEM SHOULD ONLY BE OPERATED WITH 12V DC.

GRAPHICAL SYMBOLS EXPLANATION

This lightning flash with arrowhead symbol,
within an equilateral triangle is intended to alert the user
to the presence of uninsulated "dangerous voltage" within
the product's enclosure that may be of sufficient magni­tude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (Servicing) instructions in the
literature accompanying the appliance.

2

CAUTIONS

1. Read Instructions-All the safety and operating instructions should be read before the appliance
is operated.

2. Retain Instructions-The safety and operating instructions should be retained for future refer­ence.

3. Heed Warnings-All warnings on the product and in the operating instructions should be adhered
to.

4. Follow Instructions-All operating and use instructions should be followed.

5. Cleaning-Unplug this product from power cable connector before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6. Attachments-Do not use attachments not recommended by the product manufacturer as they
may cause hazards.

7. Water and Moisture-Do not install this product near water-for example, near a bath tub, wash­bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories-Do not place this product on an unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or adult, and serious damage to the equipment.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold
with the product. Any mounting of the product should follow the manufacturer’s instructions, and
should use a mounting approved by the manufacturer.

9. A product and cart combination should be moved with care.
Quick stops, excessive force, and uneven surfaces may cause the product and cart combination

to overturn.

10. Ventilation-Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these should never be blocked by placing
the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions have been adhered to.

11. Power Sources-This product should be operated only from the type of power source indicated on
the marking label. lf you are not sure of the type of power supply to your car, consult your product
dealer.

For products intended to operate from battery power, or other source, refer to the operating
instructions.

12. Servicing-Do not attempt to service this product yourself as opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service person­nel.

3

IMPORTANT SAFEGUARDS

13. Damage requiring Service-Unplug this product the wall outlet and refer servicing to qualified
service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. lf liquid has been supplied, or objects have fallen into the product.
c. lf the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only

those controls that are covered by the operating instructions as an improper adjustment of
other controls may result in damage and will often require extensive work by a qualified techni-

cian to restore the product to its normal operation.
e. lf the product has been dropped, or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance-this indicates a need for service.

14. Replacement Parts-When replacement parts are required, be sure the service technician has
used replacement parts specified by the manufacturer or that have the same characteristics as
the original part.Unauthorized substitutions may result in fire, electric shock or other hazards.

15. Safety Check-Upon completion of any service or repairs to this video product, ask the service
technician to perform safety checks to determine that the video product is in proper operating
condition.

16. Wall or Ceiling Mounting-The product should be mounted to a wall or ceiling only safety rec­ommended by the manufacturer.

17. Heat-The product should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that produce heat.

4

IMPORTANT SAFEGUARDS

We urge you to carefully read all of the descriptions and operating procedures contained in this
Owner's Manual before operating your new LSM104.

CAUTIONS

2

IMPORTANT SAFEGUARDS

3

TABLE OF CONTENTS (THIS PAGE)

5

FEATURES

6

ACCESSORIES

7

IDENTIFICATION OF LSM104 CONTROLS & CONNECTORS

8

REMOTE CONTROL USE

10

SIGNAL CONNECTION

12

POWER CONNECTION

14

DOME LIGHT CONNECTION

15

SET UP FOR CAR USE

16

LSM104 OPERATION

17

MENU BUTTON - GENERAL INFORMATION

18

MENU BUTTON - OPERATIONS

19

PICTURE BUTTON

23

STATUS BUTTON

24

OTHER USEFUL FUNCTIONS

25

RECEPTION DISTURBANCE

27

TROUBLESHOOTING GUIDE

28

SPECIFICATIONS

29

5

TABLE OF CONTENTS

10.4 INCH TFT LCD Panel
12 Volt DC Operation
Wireless Remote Control
MTS Stereo Frequency Synthesizer Tuning System
Full On-Screen Display of all Switching Functions
Full On-Screen Display of all Picture Functions
Automatic Power On, Automatic Power Off & Memory Power On Functions
High Voltage Protection (Over 18 Volts DC)
Polarity Reversal Protection
Four Input Selections (Built-in MTS Stereo TV Tuner, Stereo Audio/Video Inputs 1, 2, & 3)
Low Level Stereo Audio/Video Output
Powered Stereo External Speakers Output
Built-In Stereo FM Transmitter with On-Screen Frequency Selection & Control
Built-In Stereo IR Transmitter
External Antenna Input
10-Year Memory Back Up

The Remote Controller that is packaged with this unit will also control any KEC Mobile Applications
Videocassette or DVD Player.

NOTES:

Automatic Power On Function:

This system will automatically power on whenever the LCD screen is lowered to its viewing position.

Automatic Power Off Function:

This system will automatically turn off approximately 15 minutes after it last receives a video signal.

Memory Power On Function:

If this system was in power on mode when power was last removed (unplugged or ignition off),
it will automatically turn on when power is reapplied.

6

FEATURES

Please check to make sure that all of these items have been included:

REMOTE CONTROL

BATTERIES(AAA 2)

WARRANTY CARD

OWNERS MANUAL

ACCESSORIES

HOUSING FRAME & INSTALLATION SCREWS

7

CUTOUT TEMPLATE

Other general and vehicle specific mounting and installation accessories are also available.

The following optional accessory is available from KEC Mobile Applications and/or its distributors at
additional cost:

12V DC Power extension cable

R-Link Cable

19
20
21

5

10

11 12 13 14 15 16 17

18

8

IDENTIFICATION OF LSM104 CONTROLS AND CONNECTORS

Note :

FRONT VIEW

REAR VIEW

1. DC INPUT JACK

For connection to source of 12 Volt DC power.

2. L&R AUDIO/VIDEO (THROUGH) OUTPUT
JACKS

Supplies L&R Audio and Video signal for connec­tion to additional monitors, external amplifiers,
etc.
When the screen is lowered, these outputs
always feed the signal from the selected input
source.
When the screen is in the closed position, these
outputs always feed the signal from the program
source connected to A/V1.

3. L&R AUDIO/VIDEO 1 INPUT JACKS

For connection of a 1st external program source.

DC OUT JACK

For connection to a supplies of 12 volt DC power.

R-Link JACK

For connection to an external KEC Mobile
Applications VCP or DVD Player.

4. EXTERNAL SPEAKERS OUTPUT CON­NECTOR

Supplies 2.0 W/Channel @ 4 (variable) for con­nection of optional external speakers. Use with
supplied External Speaker Extension Cable
(L&R+ & Common Ground).

5. AV3 INPUT JACK

For connection of a 3rd program source.

6. LAMPS SWITCH

Selects lighting mode.

7. LAMPS

Provides additional vehicle lighting.

8. LCD PANEL DROP-DOWN BUTTON

Push to release LCD Panel from stored position.

9. LAMP POWER INPUT WIRES

12V Constant, Chassis Ground & Door Switch.

10. AUTO POWER SWITCH

Lowering LCD Panel automatically turns power
on.

11. TV/VIDEO BUTTON

Selects program source: Broadcast TV, A/V1,
A/V2, A/V3.

12. MENU BUTTON

Displays on-screen Main menu.

13. PICTURE BUTTON

Displays on-screen Picture menu

14. CHANNEL DOWN ( ), UP ( ) BUTTONS

Selects the next lower or higher channel stored in
memory.

15. VOLUME DOWN ( ), UP ( ) BUTTONS

Adjusts volume of [optional] speakers wired to
External Speakers Output Connector (#2).
Also used in conjunction with the on-screen
menus.

16. POWER BUTTON

Press to power the LCD Panel ON/OFF.

17. STAND-BY INDICATOR

Illuminates to indicate that 12 Volt DC Power is
available, but that LCD screen is not powered on.

18. REMOTE CONTROL SENSOR

Receives control signals from the remote control
hand unit. Also passes controls signals to a KEC
Mobile Applications Videocassette Player that is
connected via an R-Link cable.

19. FM TRANSMITTER ANTENNA

Transmits low-power stereo audio signal for
reception on vehicle's FM Radio.

20. ANTENNA INPUT JACK

For connection of an external television broad­cast antenna.

21. L&R AUDIO/VIDEO 2 INPUT JACKS

For connection of a 2nd program source.

9