KT Tech KT-9088 User Manual

PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT

TM

TM

TMTM

BLUETOOTH SPEAKERPHONEPHONEPHONE

KT TECH

KT TECH

KT TECHKT TECH

USER MANUAL

KT-9088

The KT-9088 is a Bluetooth portable speakerphone with the following features:

• Wireless playback of music from your Bluetooth enabled mobile phone via the
Bluetooth connection

• Up to 33 feet (10 meters) line-of-sight operating distance

ACCESSORIES INCLUDED

AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

PRODUCT FEATURES

GETTING STARTED

1

Carefully remove the unit and all the accessories from the display carton. Please
verify that you have all the following accessories before recycling the gift box.

• User manual

• MICRO USB cable

• AUX-in cable

LOCATION OF CONTROLS

1. POWER/CHARGING/ BLUETOOTH STATUS INDICATOR (RED / BLUE)

2. ANSWER/ PLAY/STOP/PICK UP/HANG BUTTON

3. VOL+/- BUTTONS

4. NEXT/PREV BUTTONS

5. ON/OFF BUTTON

6. CHARGING JACK(MICRO USB)

7. AUX IN JACK

CHARGING INSTRUCTIONS

This unit operates on a built-in Li-ion battery that can be recharged either using the
USB port on your computer or from a USB power adaptor (not included) with a rated
output of DC 5V, 500mA and up.

Note: The Micro USB CHARGING JACK located on this unit is only designed for

charging the built- in Li-ion battery.

CHARGING THE BATTERY FOR FIRST TIME

1.) Charge the built-in Li-ion battery a minimum of 2.5 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor
(not included) using the included USB cable.

2.) The LED indicator will turn red while charging and turn-off automatically when the

unit is fully charged. Unplug the USB cable from the power source once the
battery is fully charged.

RECHARGING THE INTERNAL BATTERY

After prolonged use, the internal battery will become weak and the operation may
become intermittent. When the internal battery charge is very low, the Indicator LED
will flash red and a melody will play alerting you to recharge the internal battery as
soon as possible.
Plug the speakerphone into a USB port on your computer or into a DC 5V, 500mA
and up USB power adaptor (not included) using the included USB cable. Disconnect
the USB cable from the speakerphone as soon as it is fully charged.

Charging in Power ON mode

• The Indicator LED is RED while charging.

• The Indicator LED will turn-off automatically when the battery is fully

charged.

Note: 1. Charging time will vary if you are listening to music while charging the