KTS GOLD SCAN III User Manual
KTS-Electronic GmbH & Co. KG – GOLD SCAN III
Pulse induction
detector
GOLD SCAN IIII
User’s Manual
KTS-Electronic GmbH & Co. KG
Germany
KTS-Electronic GmbH & Co. KG – GOLD SCAN III
Table of content
1 General guidelines.............................................................................................. 3
1.1 Preface .............................................................................................................. 3
1.2 Important details .............................................................................................. 3
1.3 Scope of delivery ............................................................................................. 4
2 Hardware operation ............................................................................................ 5
2.1 Assembly of GOLD SCAN III search coils ..................................................... 5
2.1.1 Search coil 35cm ................................................................................................. 5
2.1.2 Search frame 1x1m ............................................................................................. 6
3 Electronic unit ..................................................................................................... 7
3.1 Setup electronic unit ....................................................................................... 7
3.2 GOLD SCAN III display .................................................................................... 8
4 Search methods .................................................................................................. 8
4.1.1 Search with 35cm search coil ............................................................................. 8
4.1.2 Search with 1x1m search frame ......................................................................... 9
4.1.3 Search with Cylindrical coil .............................................................................. 10
4.2 Battery and charger ....................................................................................... 11
5 Android software .............................................................................................. 12
5.1 Commissioning of tablet computer .............................................................. 12
5.2 Bluetooth-Connection ................................................................................... 13
5.3 KTS Software ................................................................................................. 14
5.3.1 Search with KTS GOLD SCAN III software ...................................................... 14
5.3.2 Evaluation with KTS GOLD SCAN III ................................................................ 15
5.3.3 Settings for KTS GPA 3D .................................................................................. 16
5.4 Reinstallation ................................................................................................. 17
6 System requirements and license agreements .............................................. 17
6.1 System requirements .................................................................................... 17
6.2 License agreements ...................................................................................... 17
6.3 Terms of use .................................................................................................. 18
6.4 Exclusion of liability ...................................................................................... 18
7 Warranty ............................................................................................................ 18
7.1 After expiration date ...................................................................................... 19
7.2 Care ................................................................................................................. 19
7.3 Legal note ....................................................................................................... 19
8 Contact .............................................................................................................. 20
KTS-Electronic GmbH & Co. KG – GOLD SCAN III
3
1 General guidelines
1.1 Preface
Congratulations on your purchase of one of the most advanced high performance
detectors: the GOLD SCAN III.
The GOLD SCAN III is the new development of KTS-Electronic GmbH & Co. KG. The
device contains the GOLD SCAN III unit and the GOLD SCAN III unit, which is the
successor of GOLD SCAN II, in one housing.
The GOLD SCAN III set contains now a new two-fold demountable 1 meter Super
probe, in which different sensors are built-in. These sensors are selected by pressing
the search depth button. Without the need for an exchange of probes the search
power can be chosen in a range of 10 m to 25 m. Besides the KTS 3D software the
new "GPA Visualizer" software is pre-installed on the tablet computer; this enables
an easy operation without the need for previous knowledge.
Already pre-installed programs and an instruction manual which is furnished with
numerous illustrations and easy to understand will facilitate the assembly, so that
nothing will stand in the way for a practical application. Furthermore there is an
assembly instruction-video available on the tablet and an enclosed flash drive.
This instruction has been developed by KTS-Electronic GmbH & Co. KG. Any
alterations or duplications are only allowed with written permission of KTS-Electronic
GmbH & Co. KG. KTS-Electronic GmbH & Co. KG reserves the right to modify the
instruction with new knowledge at anytime. The new instructions can always be
downloaded gratuitously from our website.
1.2 Important details
Please note:
Stay away from conducting overhead lines
Do not use cell phone during operation
Do not process measurements during thunderstorms
Keep dry
Accurate operation is only guaranteed with a fully charged battery
For operation or charging only use the components enclosed or authorized by KTS
GmbH & Co. KG.
KTS-Electronic GmbH & Co. KG – GOLD SCAN III
4
1.3 Scope of delivery
Hardware:
GOLD SCAN III electronics unit with Bluetooth®
Search coil with 35cm (13,7"), incl. two-part carbon telescopbar
Cylindrical (waterproof) 5x20cm with 10m cable
New 1x1m searchframe with cable in pipe, 8-fold dismountable (including
backpack)
Tablet Computer with Android operating system and KTS-software
Li-Ion Battery pack (cable included) for 4-8 hours operation
Quick charger (2800mAh) incl. 110 Volt adapter
Power inverter with car charger
Solid hard-top case for electronics and Tablet
Software:
Newly developed KTS GOLD SCAN III
USB stick with software for processing data on other computers
Service:
English, German, French or Spanish user's manual.
Assembly instruction-video
2 years manufacturer's warranty for the entire scope of delivery (incl.
hardware and software)
Abb.: 1-1 Complete GOLD SCAN III-Set
KTS-Electronic GmbH & Co. KG – GOLD SCAN III
5
2 Hardware operation
2.1 Assembly of GOLD SCAN III search coils
2.1.1 Search coil 35cm
The search coil is already connected to the telescope rod.
Screw the telescope rod to armrest.
Connect the electronic unit to the armrest (display facing up) and fasten it with
the adjusting screw.
Plug the search coil in to the “Pulse”-socket of the electronic unit.
Fig.: 2-1 35cm search coil with armrest
KTS-Electronic GmbH & Co. KG – GOLD SCAN III
6
2.1.2 Search frame 1x1m
Plug the pipes together. Mind the yellow markings, which should all face in the
same direction.
While plugging together the last two pieces there will be a 10-15cm slack of
cable which runs through the pipe. Fold the cable and place it into the pipe like
shown in the figures.
Plug the search frame in to the “Pulse”-socket of the electronic unit.
Fig.: 2-2 Search frame (unpluggged)
Fig.: 2-3 Folded cable
Fig.: 2-4 Placed cable
Loading...